20v vs 40v Lawn Edger: Which One Should You Buy?
20v vs 40v lawn edger compared: one 40v edger and three 20v edgers, with blade size, speed, weight and warranty as stated.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Litheli 20V Cordless Hedge Trimmer9.7/10View on Amazon - 2
BLACK+DECKER 40V MAX 13 in String Trimmer Edger Cordless with9.5/10View on Amazon - 3
Greenworks 40V 8 in Cordless Electric Lawn Edger9.5/10View on Amazon - 4
WORX Electric Lawn EdgerView on Amazon - 5
BLACK+DECKER Electric Lawn MowerView on Amazon - 6
BLACK+DECKER 3-in-1 String Trimmer/Edger & Lawn MowerView on Amazon - 7
TrimmerPlus Lawn Edger Attachment for Compatible Gas PoweredView on Amazon - 8
EGO Power+ 8" Lawn Edger Attachment & Multi-Head System PowerView on Amazon - 9
beyond by BLACK+DECKER 20V MAX String Trimmer / EdgerView on Amazon
A lawn with a sidewalk, a driveway or a curb grows a ragged edge by midsummer, and a clean edge makes the whole yard look cared for. The question behind 20v vs 40v lawn edger is simple: does the higher voltage buy you anything on a normal yard, or does a 20v edger on batteries you already own do the same job? The short answer is that the 40v edger here lists the highest stated no-load speed, 6500 RPM, while the 20v edgers list up to 3200 RPM or no speed at all, and this guide compares the four cordless edgers we scored so you can match one to your battery shelf.
Other machines to compare
WORX Electric Lawn EdgerCheck price on Amazon
BLACK+DECKER Electric Lawn MowerCheck price on Amazon
BLACK+DECKER 3-in-1 String Trimmer/Edger & Lawn MowerCheck price on Amazon
TrimmerPlus Lawn Edger Attachment for Compatible Gas PoweredCheck price on Amazon
EGO Power+ 8" Lawn Edger Attachment & Multi-Head System PowerCheck price on Amazon
beyond by BLACK+DECKER 20V MAX String Trimmer / EdgerCheck price on Amazon
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
20v vs 40v lawn edger: what voltage changes
The listings give one direct speed comparison: the Greenworks 40V lists a no-load speed of 6500 RPM, while the Jenixy 20V lists up to 3200 RPM, and the other two 20v listings state no speed at all. A higher stated no-load speed is not the same as more cutting power, since no listing states a torque figure, so voltage is not the whole story. Blade size, depth settings, weight and the batteries you already own matter as much, and the three 20v edgers in this guide cover those points in different ways. The table below lines up the stated figures, then each edger gets its own section.
| Edger | Voltage | Blade | Stated speed | Stated weight |
|---|---|---|---|---|
| Greenworks 40V | 40V | 8 inch | 6500 RPM | 8.6 pounds |
| Jenixy | 20V | 9 inch | Up to 3200 RPM | 8.8 lbs |
| CRAFTSMAN 20V | 20V | Not stated | Not stated | 8 lbs |
| DDKUN | 20V | 8.6 inch | Not stated | Not stated |
The gear we compared
All four edgers are cordless and all four are sold as a bare tool or tool only, so the battery is a separate decision in every case. The Greenworks leads the ranking on stated speed and voltage, the Jenixy follows on blade size and speed, the CRAFTSMAN follows on its stated warranty and battery platform, and the DDKUN closes the ranking because its listing states no speed, weight or warranty.
The Greenworks 40V 8 inch Brushless Edger leads. The listing states an 8 inch brushless blade, a curb wheel, tool-free depth adjustment, a no-load speed of 6500 RPM and a weight of 8.6 pounds. The maker describes a lightweight build with superior ergonomics for reduced fatigue, and a maintenance-free design with no gas, no oil and no emissions that starts instantly. The battery and charger are not included, so this is a bare-tool buy for someone already on the Greenworks 40V platform. No warranty term is stated.
The Jenixy brushless lawn edger sits second. The listing states a 9 inch blade, up to 3200 RPM, three-position cutting depth, adjustable balance wheels and a weight of 8.8 lbs. It fits all DeWalt 20V batteries, naming DCB200, DCB203, DCB204 and DCB206, and it is sold as tool only with no battery included. The listing also names the grass types it suits: Bermuda, St. Augustine, Zoysia, Fescue, Bluegrass and Ryegrass. No warranty term is stated.
The CRAFTSMAN 20V Edger sits third. The listing states an integrated edge guide for a smooth cut along sidewalks and driveways, a VERSATRACK hook for wall storage, and compatibility with all CRAFTSMAN V20 outdoor equipment and power tools. It is the only listing here that states a warranty term: a 3 Year Limited Warranty. The listing disagrees with itself on weight: the bullets describe a lightweight 8 lbs design while the listing details state 10.5 pounds. This guide follows the bullets and uses 8 lbs. The battery is sold separately, and no blade size or speed is stated.
The DDKUN cordless lawn edger closes the ranking. The listing states an 8.6 inch rust-proof steel blade, three cutting depth settings and a 4-position rear guide wheel, with an adjustable handle and a brushless motor. It is compatible with DeWalt 20V lithium-ion batteries and is sold as tool only. The stated size is 25.0 inches x 10.0 inches x 5.0 inches. No speed, weight or warranty term is stated, which is why it ranks last despite the blade and depth settings.
Match the edger to your battery shelf
Start with the batteries you already own, because all four edgers arrive without one. The DDKUN and the Jenixy both fit DeWalt 20V batteries, so a DeWalt owner can put either to work with no new battery. The CRAFTSMAN runs on the V20 platform, and its battery works with all CRAFTSMAN V20 outdoor equipment and power tools. The Greenworks needs a Greenworks 40V battery and charger, both sold separately. Buying into a second battery platform for one tool adds cost, so match the edger to the shelf first. Our cordless string trimmer picks cover the same battery question for trimming.
Blade size, speed and depth
Blade size runs from 8 inches on the Greenworks to 8.6 inches on the DDKUN and 9 inches on the Jenixy, while the CRAFTSMAN states no blade size. Speed is stated on two listings only: 6500 RPM no-load on the Greenworks and up to 3200 RPM on the Jenixy. Depth adjustment is stated on three: tool-free adjustment on the Greenworks, three cutting depth settings on the DDKUN, and three-position cutting depth on the Jenixy, with the DDKUN adding a 4-position rear guide wheel and the Greenworks adding a curb wheel. The CRAFTSMAN states no depth adjustment; its integrated edge guide keeps the cut line straight along sidewalks and driveways instead. See our 20v vs 40v string trimmer comparison for the same voltage question on trimmers.
Weight and handling
Three listings state a weight: 8.6 pounds for the Greenworks, 8.8 lbs for the Jenixy, and 8 lbs for the CRAFTSMAN on the bullets. The DDKUN states no weight. All four listings describe light, easy handling: the Greenworks cites a lightweight build with superior ergonomics, the DDKUN an adjustable handle, the CRAFTSMAN a lightweight design for wheeling around the yard, and the Jenixy a lightweight and compact body with a non-slip grip for one-handed operation. Weight is only part of handling; the guide wheels and edge guides help keep the cut straight along the curb. Our string trimmer for acreage picks show the same handling tradeoffs on larger ground.
Safety
Wear eye and hearing protection and sturdy shoes when you edge, clear sticks, stones and other debris from the edge before you start, and keep children, pets and bystanders away from the work area. Work with the battery out when you clear the blade or adjust the depth, and store the tool with the battery removed.
FAQ: mowing large lots
Is a 40v lawn edger stronger than a 20v edger?
Voltage is one factor, not the whole answer. The Greenworks 40V lists a no-load speed of 6500 RPM against up to 3200 RPM on the Jenixy 20V, but blade size, depth settings and the state of the edge matter too. Compare the stated speed and blade size, not the voltage alone.
Can I use my DeWalt 20V battery on these edgers?
On two of them. The DDKUN and the Jenixy both state compatibility with DeWalt 20V batteries, and the Jenixy names DCB200, DCB203, DCB204 and DCB206. The Greenworks needs a 40V battery and the CRAFTSMAN runs on the V20 platform, so neither fits a DeWalt 20V battery.
Do any of these edgers include a battery?
No. The Greenworks lists the battery and charger as not included, the DDKUN and the Jenixy are sold as tool only, and the CRAFTSMAN notes the battery is sold separately. Budget for a battery and charger if you do not already own the matching platform.
Which edger states a warranty?
Only the CRAFTSMAN, with a 3 Year Limited Warranty. The Greenworks, Jenixy and DDKUN listings state no warranty term.
What blade sizes do these edgers list?
The Greenworks lists an 8 inch blade, the DDKUN an 8.6 inch blade and the Jenixy a 9 inch blade. The CRAFTSMAN states no blade size.
More mowing guides
- Best String Trimmer for Acreage: 4 Gas and Battery Picks
- Best Cordless String Trimmer: 5 Top Picks Compared (2026)
- 20v vs 40v String Trimmer: Which One Should You Buy?
- How Long Does It Take to Mow an Acre? Times by Mower Type
See all trimmer and blower guides.




