Aluminum vs Steel Mower Ramps: Which One Should You Buy?
Aluminum and steel mower ramps compared on capacity, length, grip, handling and upkeep, with two aluminum examples and one steel example from the listings reviewed.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VEVOR Aluminum Ramps9.6/10View on Amazon - 2
Stalwart 77-Inch Folding Steel Loading Ramps9.6/10View on Amazon - 3
55" L Aluminum Shed Ramps for Lawn Mowers9.5/10View on Amazon - 4
Evcitn Truck Ramps 75" 1500 LBS 2 PackView on Amazon - 5
Loading RampsView on Amazon - 6
KOLOTOOL Aluminum Shed Ramps for Lawn MowerView on Amazon - 7
KOLOTOOL Aluminum Shed Ramps for Lawn MowersView on Amazon - 8
KOLOTOOL 39" L Aluminum Shed Ramps for Lawn MowersView on Amazon - 9
gardhom 33" x 48" Aluminum Shed Ramp for Riding MowerView on Amazon
Verdict: Choose aluminum if you want the higher stated capacities in these examples. Choose steel if you load mowers onto low steps and sheds and want a shorter, zinc-coated ramp with a carrying handle.
Loading a mower onto a trailer or up shed steps takes a ramp that holds the weight without bending or slipping. The aluminum vs steel mower ramps question comes down to material: aluminum examples here state higher capacities, and the big aluminum example is described as corrosion-resistant, while the steel example is shorter, zinc-coated and states the lowest maximum recommended height. This comparison covers capacity, length, grip, handling and upkeep, with aluminum and steel examples from the listings reviewed.
AcreMowerLab earns a commission when you shop through links here. It never changes your price.
VEVOR Aluminum Trailer Ramps 96 in Heavy-Duty Pair
A pair of 96.1-inch aluminum trailer ramps supporting up to 10000 lbs per pair, built from 6061-T6 aluminum with a reinforced main beam, anti-slip grooves and wide claw plates.
Read the full review
The big aluminum example is a pair of 96.1-inch ramps rated up to 10000 lbs per pair and 5000 lbs per single ramp, covering trailers, pickup trucks, cars, UTVs, ATVs, motorcycles, lawn mowers and snow blowers. Its 6061-T6 aluminum build uses a reinforced main beam and precision welding, with anti-slip grooves, wide claw plates and a beveled end. The recommended use height is 3.9-31.5 in, and the longer length gives a gentler slope for low-clearance equipment.
Pros
- Up to 10000 lbs per pair, 5000 lbs per single ramp
- 6061-T6 aluminum with reinforced main beam and precision welding
- Tightly spaced anti-slip grooves for grip in wet conditions
- Wide claw plates and beveled end for smooth entry
Cons
- Heaviest pair stated here at 96.34 pounds in the spec table
- Length and weight suit trailers more than quick shed jobs
- Warranty is not stated on the listing
- Safety certification is not stated on the listing
VEVOR Aluminum Trailer Ramps 55 in Anti-Slip Pair
A pair of 55.0-inch aluminum trailer ramps supporting up to 3000 lbs per pair, with dense perforations for grip, wide claw plates, pins and a pair of gloves.
Read the full review
The smaller aluminum example is a pair of 55.0-inch ramps rated up to 3000 lbs per pair and 1500 lbs per single ramp, for lawn mowers, ATVs, motorcycles, wheelbarrows and snow blowers. Dense perforations give grip in wet conditions while allowing quick drainage, and wide claw plates that can be fixed with pins plus a beveled end keep loading steady. The recommended height is 6.9-15.7 in, and the pair stores compactly with gloves included.
Pros
- Up to 3000 lbs per pair, 1500 lbs per single ramp
- Dense perforations increase traction and allow quick drainage
- Wide claw plates that can be fixed with pins
- Stores compactly and includes gloves for lifting
Cons
- Not suitable for trucks, per the listing
- Smaller recommended height range than the 96-inch example
- Warranty is not stated on the listing
- Safety certification is not stated on the listing
VEVOR Steel Trailer Ramps 39 in Anti-Slip Pair
A pair of 38.8-inch zinc-coated steel trailer ramps supporting up to 1200 lbs per pair, with dense perforations for grip, wide claw plates and a carrying handle.
Read the full review
The steel example is a pair of 38.8-inch ramps rated up to 1200 lbs per pair and 600 lbs per single ramp, for lawn mowers, ATVs, motorcycles, wheelbarrows and snow blowers. Its heavy-duty zinc-coated steel build uses dense perforations for grip and drainage, wide claw plates and a beveled end. The recommended height is 3.9 to 11.8 in, and a carrying handle makes the pair easy to lift and store.
Pros
- Heavy-duty zinc-coated steel build
- Dense perforations increase traction and allow quick drainage
- Carrying handle and compact storage
- Wide claw plates and beveled end for smooth entry
Cons
- Lowest stated capacity here at 1200 lbs per pair, 600 lbs per single ramp
- Not suitable for trucks, per the listing
- Lowest length of the three, with the lowest maximum recommended height
- Warranty is not stated on the listing
Other machines to compare
Evcitn Truck Ramps 75" 1500 LBS 2 PackCheck price on Amazon
Loading RampsCheck price on Amazon
KOLOTOOL Aluminum Shed Ramps for Lawn MowerCheck price on Amazon
KOLOTOOL Aluminum Shed Ramps for Lawn MowersCheck price on Amazon
KOLOTOOL 39" L Aluminum Shed Ramps for Lawn MowersCheck price on Amazon
gardhom 33" x 48" Aluminum Shed Ramp for Riding MowerCheck price on Amazon
Aluminum vs steel mower ramps side by side
| Factor | VEVOR Aluminum 96 in | VEVOR Aluminum 55 in | VEVOR Steel 39 in |
|---|---|---|---|
| Material | 6061-T6 aluminum, reinforced main beam | Aluminum | Heavy-duty zinc-coated steel |
| Capacity (pair) | Up to 10000 lbs | Up to 3000 lbs | Up to 1200 lbs |
| Capacity (single ramp) | 5000 lbs | 1500 lbs | 600 lbs |
| Length | 96.1 inches | 55.0 inches | 38.8 inches |
| Width | 15.0 inches | 12.0 inches | 8.9 inches |
| Recommended height | 3.9-31.5 in | 6.9-15.7 in | 3.9 to 11.8 in |
| Grip surface | Tightly spaced anti-slip grooves | Dense perforations | Dense perforations |
| Weight (spec table) | 96.34 pounds | 16.98 pounds | 18.08 pounds |
| Suitable for trucks | Pickup trucks listed among uses | Not suitable for trucks | Not suitable for trucks |
Figures are manufacturer stated for the examples, collected 29 October 2026.
Capacity: what each ramp holds
Capacity separates the examples more than anything else. The big aluminum example supports up to 10000 lbs per pair and 5000 lbs per single ramp, and its listing names trailers, pickup trucks, cars, UTVs, ATVs, motorcycles, lawn mowers and snow blowers. The smaller aluminum example supports up to 3000 lbs per pair with a single ramp rated at 1500 lbs, and its listing says it is not suitable for trucks. The steel example supports up to 1200 lbs per pair with a single ramp rated at 600 lbs, and its listing also says it is not suitable for trucks. Match the mower to the stated pair capacity, since those figures describe each listing only.
Length and loading height
Longer ramps give a gentler slope, which the listings say helps low-clearance equipment avoid scraping or getting stuck. The big aluminum example measures 96.1 inches long with a recommended use height of 3.9-31.5 in. The smaller aluminum example measures 55.0 inches long with a recommended height of 6.9-15.7 in. The steel example measures 38.8 inches long with a recommended height of 3.9 to 11.8 in. The steel ramp states a recommended height of 3.9 to 11.8 in, which fits low steps and shed entries, while the long aluminum ramp states a recommended height up to 31.5 in for taller beds.
Grip and build
All three examples describe grip features for wet conditions. The big aluminum example has tightly spaced anti-slip grooves across its surface, while the smaller aluminum example and the steel example use dense perforations that increase traction and allow quick drainage. On build, the big aluminum example uses high-strength 6061-T6 aluminum with a reinforced main beam and precision welding, and its listing calls it corrosion-resistant. The steel example uses heavy-duty zinc-coated steel. All three use wide claw plates and beveled ends for smooth entry.
Handling and storage
Spec-table weights are 96.34 pounds for the big aluminum pair, 16.98 pounds for the smaller aluminum pair and 18.08 pounds for the steel pair. The smaller aluminum example includes gloves for lifting and transport and stores compactly, while the steel example has a carrying handle and also stores compactly. The big aluminum pair is the heaviest stated here by a wide margin.
The examples
Acreage and terrain fit
VEVOR Aluminum 96 in
VEVOR Aluminum 55 in
VEVOR Steel 39 in
Matching It to Your Property
- Trailers and pickup truck beds suit the big aluminum example, which states 10000 lbs per pair and a recommended height of 3.9-31.5 in.
- Low shed steps suit the steel example, with a recommended height of 3.9 to 11.8 in and a carrying handle.
- Garages with limited storage suit the smaller aluminum example, which stores compactly and includes gloves for lifting.
- Wet loading days suit any of the three, since all describe anti-slip grooves or perforations for grip.
The Acre Score explained
The Acre Score weighs five factors: performance (capacity, length and loading height), build quality (material, beam and grip surface), value (what comes in the box), safety (certifications or operator controls the listing states) and warranty (years and coverage). A factor the listing does not state scores zero, which is why every example scores zero for safety and warranty: no listing here states a safety certification or a warranty term.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR Aluminum 96 in | 9.6 | 30 | 21 | 20 | n/a | 0 |
| VEVOR Aluminum 55 in | 9.5 | 27 | 20 | 20 | n/a | 0 |
| VEVOR Steel 39 in | 9.5 | 24 | 19 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
For more mower loading gear, see our mower maintenance section.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
FAQ: mowing large lots
Can aluminum ramps hold a lawn tractor?
Check the mower against the stated pair capacity. The big aluminum example supports up to 10000 lbs per pair, the smaller aluminum example up to 3000 lbs per pair, and the steel example up to 1200 lbs per pair.
Do steel ramps rust?
The steel example here is described as heavy-duty zinc-coated steel, and the big aluminum example is described as corrosion-resistant. The listings do not promise rust prevention.
What height can these ramps load to?
Recommended heights are 3.9-31.5 in for the big aluminum example, 6.9-15.7 in for the smaller aluminum example and 3.9 to 11.8 in for the steel example. Stay inside the stated range for the ramp you use.
Are these ramps good for trucks?
Only the big aluminum example names pickup trucks among its uses. The smaller aluminum example and the steel example both state they are not suitable for trucks, so use those two for the equipment their listings name, not for trucks.
