Best Tractor Grapple Forks (2026): 5 Picks for Buckets
Five clamp-on tractor grapple forks compared by capacity, tines, weight and bucket fit, for clearing limbs, logs and yard debris.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 60 in Forks9.7/10View on Amazon - 2
Best for Brush ClearingYINTATECH 60 in Forks9.6/10View on Amazon - 3
Best Stabilizer BarGarvee Debris Forks9.6/10View on Amazon - 4
Best Reinforced TubeGarvee Pallet Forks9.6/10View on Amazon - 5
Best for 48 in BucketsYITAMOTOR Debris Forks9.5/10View on Amazon
A property with rough ground, fallen limbs and brush to clear needs a way to lift debris without pushing it around by hand, and the best tractor grapple forks turn a tractor bucket into a lifting tool for limbs, logs and yard debris. The five below are clamp-on forks that slide onto a bucket, with capacity, tines, weight and bucket fit from each listing.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall VEVOR 60 in Forks: Highest capacity here: 4560 lbs, 6 tines for a 60 in bucket. Check price on Amazon
- Best for Brush Clearing YINTATECH 60 in Forks: Tapered tines let dirt fall through while lifting brush and logs. Check price on Amazon
- Best Stabilizer Bar Garvee Debris Forks: 5 tines with a stabilizer bar to keep debris from falling. Check price on Amazon
- Best Reinforced Tube Garvee Pallet Forks: Thicker screw and tube wall, as the maker lists, for firm fixing. Check price on Amazon
- Best for 48 in Buckets YITAMOTOR Debris Forks: Clamp-on forks for 48 in or bigger buckets, with a quick slide-on fit. Check price on Amazon
Our acreage picks
VEVOR 60 in Clamp-on Debris Forks, 6 Tines
A 60 in clamp-on debris fork set with 6 tines and a 4560 lbs capacity, made from Q235 alloy steel.
Read the full review
The VEVOR 60 in Forks is the highest capacity pick here, with 6 tines, Q235 alloy steel, 10mm steel at both ends and a 4560 lbs capacity, as the maker lists. Installation uses a movable handle plus a round pipe sleeve to reinforce the fit.
Pros
- Highest capacity here, 4560 lbs, as the maker lists
- 6 tines for a 60 in bucket
- Q235 alloy steel with 10mm steel at both ends, as the maker lists
- Fully automated welding, with an anti-rust coating, as the maker lists
Cons
- No warranty term is stated in the listing
- No safety certification is stated in the listing
- Weight is not stated in the listing
- At 60 in, it needs a 60 in bucket, not a smaller bucket
YINTATECH 60 in Clamp-on Debris Forks
A 60 in clamp-on debris fork set with a 4000 lbs capacity and tapered tines that let dirt fall through.
Read the full review
The YINTATECH 60 in Forks is built for debris and brush clearing, with tapered tines, hardened steel construction and a 4000 lbs capacity, as the maker lists. It mounts onto a tractor or skid steer bucket with adjustable anti-slip clamps, with no dedicated grapple frame required.
Pros
- 4000 lbs capacity, as the maker lists
- Tapered tines slide under brush, trees and storm debris
- Dirt and small particles fall through, unlike a solid bucket
- Adjustable anti-slip clamps, with no tools required for fitting
Cons
- No warranty term is stated in the listing
- No safety certification is stated in the listing
- Tine count is not stated in the listing
- At 60 in, it needs a 60 in bucket, not a smaller bucket
Garvee Clamp-on Debris Forks to 48 in Bucket, 5 Tines
A clamp-on debris fork set for 48 in or bigger buckets, with 5 tines, a stabilizer bar and a 2500 lbs capacity.
Read the full review
The Garvee Debris Forks fit 48 in or bigger buckets, with an overall size of 31 in by 42 in, tines measuring 21 in by 2 in by 2 in, and a tines clearance of 7.99 in, as the listing states. The design of 5 forks and a stabilizer bar keeps debris from falling while hauling limbs, logs, lumber, timber and firewood.
Pros
- 5 tines with a stabilizer bar to keep debris from falling
- 2500 lbs capacity, as the maker lists
- High-strength steel with an anti-corrosion and anti-rust coating
- Slide onto the cutting edge and tighten with a screw rod, with no tools required
Cons
- No warranty term is stated in the listing
- No safety certification is stated in the listing
- At 42 in wide, it covers less width than the 60 in forks
- Reply within 12 hours is stated for customer service, not a warranty term
Garvee Clamp-on Pallet Forks 48 inch, 5 Forks
A clamp-on pallet fork set for 48 in buckets, with 5 tines, a thicker screw and tube wall, and a 2500 lbs capacity.
Read the full review
The Garvee Pallet Forks fit a 48 in bucket, with an overall size of 42 in by 31 in, 5 tines and a 2500 lbs capacity, as the listing states. Installation slides the fork onto the blade of the bucket and rotates it to clamp to lock.
Pros
- 5 tines for a 48 in bucket
- 2500 lbs capacity, as the maker lists
- 30% thicker screw for firm fixing, as the maker lists
- 40% heavy duty thick rectangular tube wall, as the maker lists
Cons
- No warranty term is stated in the listing
- No safety certification is stated in the listing
- At 42 in wide, it covers less width than the 60 in forks
- Capacity is 2500 lbs, below the 60 in forks here
YITAMOTOR Clamp-on Debris Forks for 48 in Tractor Bucket
A clamp-on debris fork set for 48 in or bigger buckets, with a 2500 lbs capacity and a slide-on clamp fit.
Read the full review
The YITAMOTOR Debris Forks fit 48 in or bigger buckets, with an overall size of 31 in by 42 in, a weight of approximately 83 lbs and a 2500 lbs capacity, as the listing states. The listing is not consistent on tines: the title states 4 fork tines, while the item specifications state 5 fork tines measuring 21 in by 2 in by 2 in, so check the tine count before ordering.
Pros
- 2500 lbs capacity, as the maker lists
- Slide over the edge of the bucket and clamp down to lock
- Overall size of 31 in by 42 in, as the listing states
- Fits 48 in or bigger buckets, with buckets less than 2 inches thick stated as good for this product
Cons
- No warranty term is stated in the listing
- No safety certification is stated in the listing
- Title and bullets disagree on tine count, so tine count must be checked before ordering
- Capacity is 2500 lbs, below the 60 in forks here
Side-by-side specs
| Model | Acre Score | Bucket fit | Tines | Capacity | Weight |
|---|---|---|---|---|---|
| VEVOR 60 in Forks | 9.7/10 | 60 in | 6 | 4560 lbs | Not stated |
| YINTATECH 60 in Forks | 9.6/10 | 60 in | Not stated | 4000 lbs | 83.0 pounds |
| Garvee Debris Forks | 9.6/10 | 48 in or bigger | 5 | 2500 lbs | 81.3 pounds |
| Garvee Pallet Forks | 9.6/10 | 48 in | 5 | 2500 lbs | 84.11 pounds |
| YITAMOTOR Debris Forks | 9.5/10 | 48 in or bigger | Title states 4, bullets state 5 | 2500 lbs | Approximately 83 lbs |
Specifications are manufacturer rated as listed, collected 2 November 2026.
Acreage and terrain fit
VEVOR 60 in Forks
YINTATECH 60 in Forks
Garvee Debris Forks
Garvee Pallet Forks
YITAMOTOR Debris Forks
Buying guide: choosing the best tractor grapple forks
Capacity and bucket fit
Capacity is the clearest split. The VEVOR listing states 4560 lbs for a 60 in bucket, the YINTATECH listing states 4000 lbs for a 60 in bucket, and the three 48 in listings state 2500 lbs each. Match fork size to bucket first.
Tines and stabilizer
Tine count runs from 5 on the 48 in forks to 6 on the VEVOR 60 in fork, while the YINTATECH listing does not state a tine count. The Garvee debris forks add a stabilizer bar to keep debris from falling, and the YINTATECH tapered tines let dirt fall through.
Clamp and installation
All five listings describe a clamp-on fit with no dedicated grapple frame. The Garvee debris forks slide onto the cutting edge and tighten with a screw rod, the Garvee pallet forks slide onto the blade and rotate to clamp, the VEVOR listing uses a movable handle plus a round pipe sleeve, and the YINTATECH listing uses adjustable anti-slip clamps. Check bucket edge thickness before ordering, since the YITAMOTOR listing states buckets less than 2 inches thick are good for that product. For a related comparison, see our tractor bucket vs grapple guide.
Weight and handling
Weight is stated for four listings: 81.3 pounds for the Garvee debris forks, approximately 83 pounds for the YITAMOTOR forks, 83.0 pounds for the YINTATECH forks, and 84.11 pounds for the Garvee pallet forks. The VEVOR listing does not state a weight. Check your loader capacity in your manual before lifting a full load.
Slopes
None of the listings states a slope rating. Work within the owner’s manual limits for your tractor and loader, and use the Slope Calculator to measure the slope.
Turn rise and run, or a phone level reading, into degrees and percent, then compare it with typical mower slope ratings.
Stay within the towing capacity and hitch weight your mower manual lists, and add weight slowly. Loaded carts and spreaders push a mower downhill, so take slopes straight up and down at low speed. Keep riders off carts and keep bystanders clear while you tow. Read our Safety Disclaimer.
Matching It to Your Property
- Rough ground with limbs and logs: the 60 in forks carry 4560 lbs and 4000 lbs.
- Smaller buckets: the 48 in forks fit 48 in or bigger buckets, so measure your bucket before ordering.
- Storage: clamp-on forks remove from the bucket, so it can return to other work.
- Obstacles and brush piles: tapered tines on the YINTATECH listing slide under brush, while the Garvee stabilizer bar helps keep debris from falling.
The Acre Score explained
The Acre Score weighs performance, build quality, value, safety and warranty. A factor the listing does not state scores zero.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 60 in Forks | 9.7 | 32 | 22 | 21 | n/a | 0 |
| YINTATECH 60 in Forks | 9.6 | 29 | 20 | 21 | n/a | 0 |
| Garvee Debris Forks | 9.6 | 29 | 20 | 20 | n/a | 0 |
| Garvee Pallet Forks | 9.6 | 28 | 21 | 19 | n/a | 0 |
| YITAMOTOR Debris Forks | 9.5 | 27 | 19 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
FAQ: mowing large lots
What is a tractor grapple?
A tractor grapple is a bucket attachment with tines that lifts limbs, logs and debris, and the clamp-on forks here slide onto a tractor bucket to do that job without a dedicated grapple frame.
How does a tractor grapple work?
The forks slide onto the cutting edge of the bucket and clamp down with a screw rod or handle, then the bucket lifts the debris on the tines.
Is a tractor grapple worth it?
For a property with regular limbs and brush to clear, clamp-on forks add lifting ability to a bucket you already own, without a dedicated frame.
How do I check bucket fit?
Match the fork size to your bucket: the 48 in forks fit 48 in or bigger buckets, and the 60 in forks fit 60 in buckets, and check bucket edge thickness, since the YITAMOTOR listing states buckets less than 2 inches thick are good for that product.
More mowing guides
- Best Debris Forks for Tractor Bucket (2026): 5 Picks Compared
- Best Subcompact Tractor Pallet Forks (2026): 5 Picks for Loader Buckets
- Best Tractor Bucket Forks Under $140 (2026): Picks Compared
- Best Tractor Bucket Forks with Stabilizer Bar: 5 Clamp-On Picks
- Tractor Bucket vs Grapple: Which One Should You Buy?
- Best Garden Tractor for Attachments (2026)
Use the Mower Matcher to narrow down choices by acreage, terrain, budget, and power type.
