ATV vs UTV Snow Plow: Which One Should You Buy?
An ATV vs UTV snow plow guide: how the two machines compare for winter clearing, with two plow kits for driveways, farm roads and rural paths.
On this page
For winter clearing, an ATV vs UTV snow plow choice comes down to the machine already in the shed: if the machine is an ATV, both kits list ATV fit, subject to the exclusions in the mounting section, and if the machine is a UTV, the universal kit is the one that lists fit for both machines. Width, angle and mount options then decide which kit suits the driveway, farm road or parking lot.
As an Amazon Associate I earn from qualifying purchases. AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
ATV vs UTV Snow Plow: Which Machine Fits Your Property
The listings draw the line by fit. The VEVOR kit lists fit for most ATV and UTV models through a multi-hole mounting plate with 3 installation options, while the KUAFU kit names ATV models from Honda, Kawasaki, Polaris, Aeon, Crossland and Arctic-Cat Alterra and states that it does not fit Can-Am Outlander models. So the direct answer is simple: a UTV owner has one kit here that lists UTV fit, and an ATV owner can weigh both kits on width, angle and mounts.
The gear: two plow kits
Ranked by the listings, the VEVOR Snow Plow Kit comes first for adjustability and fit: 2 width settings of 43 in and 60 in, 5 left-to-right angle positions up to 24.88 degrees, 3 height settings and 3 mount options, with a reinforced blade panel and mounting plate and a push tube wall thickness of 4 mm. It lists use for residential driveways, farm roads, parking lots and rural paths, and the listing states quick attachment and removal for space-saving storage when not in use. The kit weighs 104.28 pounds per the spec table.
The KUAFU Snow Plow Blade Universal Kit comes second: a heavy-duty steel blade 48 in wide and 17 in high, a 20 in wide blade mounting system, and 5-position angle adjustment with 2 left, center and 2 right positions. The push tube uses a square tube steel chassis with an ergonomic pivot handle and quick pin attachment, and the mid-mount kit mounts to the underside of the vehicle chassis. The listing notes 2 packages, and that ATVs with welded-on skid plates may require drilling for installation.
| Kit | Width | Angle | Mount | Fits |
|---|---|---|---|---|
| VEVOR Snow Plow Kit | 43 in and 60 in | 5 positions, up to 24.88 degrees | 3 mount options | Most ATVs and UTVs |
| KUAFU Snow Plow Blade | 48 in | 5 positions: 2 left, center, 2 right | Mid-mount, universal mount kit | Listed ATVs; not Can-Am Outlander |
Width and angle options
Width decides how much snow moves per pass, and angle decides where it goes. The VEVOR kit offers 2 width settings, 43 in and 60 in, with 5 angle positions up to 24.88 degrees and 3 height settings to match the surface. The KUAFU kit offers one blade size, 48 in wide and 17 in high, with 5 angle positions of its own: 2 left, center and 2 right. A buyer who clears both a narrow lane and a wide farm road gets more range from the adjustable kit, while a buyer clearing one driveway may find the fixed blade enough.
Mounting and fit
Mounting is where the two kits differ most. The VEVOR kit uses an upgraded multi-hole mounting plate with 3 installation options and lists fit for most ATV and UTV models, with a simplified component structure for quick attachment and removal. The KUAFU kit uses a mid-mount kit designed for the underside of the vehicle chassis, with under-body mounts that attach directly to the ATV frame for plowing control. Two fit notes matter: the KUAFU kit does not fit Can-Am Outlander models, and ATVs with welded-on skid plates may require drilling for installation. Check the mount type and the exclusion list before ordering, since neither listing names a universal fit for every machine.
Where each kit works
The VEVOR listing names its ground plainly: residential driveways, farm roads, parking lots and rural paths, with adaptation to narrow lanes, steep slopes, deep snow and complex terrain. The KUAFU listing names vehicle fit rather than ground, so its case rests on the ATV models it lists and the mid-mount design. For a property that mixes a driveway with a farm road, the VEVOR kit’s stated uses cover both; for a single ATV already on the fit list, the KUAFU kit covers the machine.
Storage and removal
Plows spend most of the year off the machine, so removal matters. The VEVOR listing states quick attachment and removal from the mounting bracket and easy detachment for space-saving storage when not in use. The KUAFU listing states 2 packages on delivery and a quick pin attachment on the push tube, but states no storage claim, so plan wall or shelf space for the blade and push tube. Keep the mount hardware with the kit so the next snowfall does not start with a search.
Safety
Clear sticks, stones and other debris from the path before plowing, and keep children, pets and bystanders away from the work area. Never plow toward people, parked cars or roads, and follow the vehicle manual for the machine under the plow. No slope rating is stated for either kit, so treat steep ground with care and stop if traction feels uncertain. Refuel only with the engine off and cool.
FAQ: mowing large lots
Can one plow kit fit both an ATV and a UTV?
The VEVOR kit lists fit for most ATV and UTV models. The KUAFU kit is ATV-only and does not fit Can-Am Outlander models.
What widths do the kits here offer?
The VEVOR kit offers 2 width settings, 43 in and 60 in. The KUAFU blade is 48 in wide and 17 in high.
Does the KUAFU kit fit a Can-Am Outlander?
No. The listing states that it does not fit Can-Am Outlander models.
How many angle positions do the kits have?
Both list 5 positions. The VEVOR kit angles up to 24.88 degrees, and the KUAFU kit offers 2 left, center and 2 right positions.
What surfaces does the VEVOR listing name?
Residential driveways, farm roads, parking lots and rural paths, with adaptation to narrow lanes, steep slopes, deep snow and complex terrain.
