Auto Feed vs Bump Feed String Trimmer: Which One Should You Buy?
Auto feed and bump feed heads compared, with two 20V cordless bump feed examples that state 16-inch cutting widths and 0.08-inch line.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Houselife 20V Cordless String Trimmer9.5/10View on Amazon - 2
HEINPRO 20V Cordless String Trimmer9.4/10View on Amazon
Verdict: Choose bump feed for line on demand with a tap on the ground. Choose auto feed for line that advances on its own as line wears. The examples below use bump feed heads, so the auto feed side is described in general terms.
Along fence lines, around trees and beside beds, grass grows where a mower cannot reach, and the head at the end of a trimmer shaft decides how line is fed. That choice is the auto feed vs bump feed string trimmer question, and it matters most when line runs short in thick grass far from the shed.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
The two examples

Houselife 20V Cordless String Trimmer
A 20V cordless string trimmer with a brushless motor, a dual-line bump feed head, a 16-inch cutting width that adjusts down to 14 or 12 inches, a dual safety switch, an anti-slip handle, and 2 spools included, sold as a tool only.
The Houselife listing describes a 20V cordless string trimmer with a brushless motor and a dual-line bump feed head. The cutting width is 16 inches and adjusts down to 14 or 12 inches. Line size is 0.08-inch on both ends, and 2 spools are included. The handle is anti-slip, and a dual safety switch is stated as a control against accidental start-ups.
Pros
- Dual-line bump feed with 0.08-inch line on both ends for balanced cutting
- Cutting width adjusts from 16 inches down to 14 or 12 inches for beds, fences and edges
- Dual safety switch helps prevent accidental start-ups
- Anti-slip handle and 2 spools included in the box
Cons
- Battery and charger are not included, so a DEWALT 20V MAX battery is needed
- Motor speed is not stated on the listing
- Weight is not stated on the listing
- Warranty is not stated on the listing

HEINPRO 20V Cordless String Trimmer
A 20V cordless string trimmer with a brushless motor rated at 6000 RPM, a 16-inch cutting swath, 0.08-inch bump feed line, an adjustable auxiliary handle, and pre-wound coils in the box, sold as a tool only.
The HEINPRO listing describes a 20V cordless string trimmer with a brushless motor rated at 6000 RPM and a 16-inch cutting swath. Line size is 0.08-inch, and the bump feed head advances line when the head is tapped on the ground. The handle adjusts for height and preference, and the listing states a weight of 5.8 pounds with dimensions of 70.0 inches x 11.2 inches x 5.0 inches.
Pros
- Brushless motor rated at 6000 RPM with a 16-inch cutting swath
- Bump feed head advances line with a tap of the head on the ground
- Adjustable auxiliary handle for balance and control during edging and trimming
- 6 pre-wound coils in 3 sets of 2, with a set pre-installed
Cons
- Battery and charger are not included, so a DeWalt 20V MAX battery is needed
- No safety switch or safety certification is stated on the listing
- Warranty is not stated on the listing
Other machines to compare
Speed-Feed 400 Universal Bump Feed String Trimmer HeadCheck price on Amazon
WORX 15" 2-in-1 Electric String Trimmer & Lawn Edger for LawnCheck price on Amazon
25-2 Trimmer Head for Stihl Weed Eater FS130 FS110 FS90Check price on Amazon
314608005 Trimmer Head for Ryobi Reel Easy+ Bump Feed StringCheck price on Amazon
String Trimmer Head SRM-225 FOR Echo Speed Feed 400 HeadCheck price on Amazon
3 Pack String Trimmer Head compatible for Echo Speed Feed 400Check price on Amazon
Auto feed vs bump feed string trimmer side by side
| Factor | Houselife 20V | HEINPRO 20V | Auto feed head |
|---|---|---|---|
| Feed head | Dual-line bump feed | Bump feed | Auto feed |
| How line advances | Tap the head on the ground | Tap the head on the ground | Advances without a tap as line wears |
| Power | 20V MAX battery platform, tool only | 20V MAX battery platform, tool only | Varies by model |
| Cutting width | 16-inch, adjustable down to 14 or 12 inches | 16-inch | Varies by model |
| Line | 0.08-inch, dual-line | 0.08-inch | Varies by model |
| Motor | Brushless, speed not stated | Brushless, 6000 RPM | Varies by model |
| Line supply in the box | 2 spools included | 6 pre-wound coils in 3 sets of 2 | Varies by model |
| Handle | Anti-slip handle | Adjustable auxiliary handle | Varies by model |
| Safety control | Dual safety switch | Not stated | Varies by model |
| Weight | Not stated | 5.8 pounds | Varies by model |
Figures are manufacturer stated for the example models, collected 4 November 2026.
How the feed heads differ
With bump feed, line advances when the head is tapped on the ground. The HEINPRO listing describes that action as a way to keep cutting without stopping. The Houselife listing describes a dual-line bump feed head, so line feeds from both ends of the head.
With auto feed, line advances on its own as line wears, with no tap needed. No auto feed example is included in the listings reviewed here, so this article states no speed, width or line size for an auto feed model. That gap matters: a buyer comparing feed heads on stated specs alone can only compare the bump feed examples below.
Bump feed in practice
For edges and fence lines, bump feed gives the user control over when line feeds. A tap feeds fresh line, and without a tap the head feeds no new line. That control suits beds and walks, where you feed line only when the current line runs short.
The Houselife example adds width control to bump feed. Its width adjusts from 16 inches down to 14 or 12 inches, so a wide pass covers open lawn and a narrow pass fits beside beds and fences.
The HEINPRO example adds a stated motor speed to bump feed. Its brushless motor is rated at 6000 RPM, with a 16-inch cutting swath and 0.08-inch line.
Power and platform
Both examples run on a 20V MAX battery platform, and both are sold as a tool only. A buyer needs a compatible battery and a charger before use, and the listings state that the battery and charger are not included.
The Houselife listing states compatibility with a DEWALT 20V MAX battery. The HEINPRO listing states compatibility with a DeWalt 20V MAX battery.
Neither listing states runtime, so this article makes no claim about how long either example runs on a charge.
Handling and comfort
The Houselife example lists an anti-slip handle. The HEINPRO example lists an adjustable auxiliary handle that repositions for height and preference. The HEINPRO listing also states a weight of 5.8 pounds. The Houselife listing states no weight, so weight cannot be compared between the examples.
Upkeep and line supply
Line supply is where the examples differ in the box. The Houselife listing includes 2 spools. The HEINPRO bullets describe 6 pre-wound coils in 3 sets of 2, with a set pre-installed and additional sets ready.
Both examples use 0.08-inch line. The Houselife head feeds line from both ends. The HEINPRO head feeds line with a tap on the ground.
When the line on the head runs out, a spare spool or coil in the box lets work resume sooner. Keep spare line on hand for either head, and clear debris from the head before changing line.
Acreage and terrain fit
Houselife 20V
HEINPRO 20V
Matching It to Your Property
- For fence lines and beds with obstacles, the Houselife width adjusts down to 14 or 12 inches for narrow passes.
- For open lawn edges, the 16-inch width stated for both examples covers ground with each pass.
- For storage, both examples are cordless shaft tools with no fuel to store, and both need a charged 20V MAX battery on hand.
- For grip around beds and fences, the Houselife example lists an anti-slip handle.
- For height and preference, the HEINPRO example lists an adjustable auxiliary handle.
The Acre Score explained
The Acre Score weighs five factors: performance (power, heads and what it can cut), build quality (shaft, handle and guard), value (what comes in the box), safety (certifications or operator controls the listing states) and warranty (years and coverage). A factor the listing does not state scores zero, which is why both examples score zero for warranty. The Houselife example scores for safety because its listing states a dual safety switch. The HEINPRO example scores zero for safety because its listing states no safety switch or safety certification.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Houselife 20V | 9.5 | 26 | 21 | 20 | 5 | 0 |
| HEINPRO 20V | 9.4 | 28 | 20 | 21 | 0 | 0 |
The bottom of our scale is 9.2 and the top is 9.8; weighted totals map onto it in a straight line, keeping their order.
For more string trimmer picks, see our Best String Trimmer guide, and for line head types see Dual Line vs Single Line Trimmer Head.
Wear eye and hearing protection, long pants and sturdy footwear, and keep bystanders well back while the line or blade spins. Clear stones and debris first, and stop the engine or remove the battery before clearing the head. Refuel only with the engine off and cool. See OSHA landscaping safety. Read our Safety Disclaimer.
FAQ: mowing large lots
How does bump feed advance line?
Line advances when the head is tapped on the ground. The HEINPRO listing describes tapping the head on the ground to keep cutting without stopping. The Houselife listing describes a dual-line bump feed head that feeds 0.08-inch line from both ends.
How does auto feed differ from bump feed?
Auto feed advances line without a tap. Bump feed advances line only when the head is tapped on the ground. No auto feed example is included in the listings reviewed here, so this article gives no stated specs for an auto feed model.
Do the examples include a battery and charger?
No. Both examples are sold as a tool only. The Houselife listing states compatibility with a DEWALT 20V MAX battery. The HEINPRO listing states compatibility with a DeWalt 20V MAX battery.
Which example states a safety switch?
The Houselife example states a dual safety switch. The HEINPRO example states no safety switch.
What cutting widths do the examples state?
The Houselife width is 16 inches and adjusts down to 14 or 12 inches. The HEINPRO width is 16 inches.




