Best Garden Rake (2026): 5 Compared
Five garden rakes compared by tine count, head width, handle length and material, with stated specs from each listing and who should skip each.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDIIG 63 in Bow Rake9.6/10View on Amazon - 2
Best 63 in HandleLilyvane 63 in Rake9.6/10View on Amazon - 3
Best 16 in HeadYEELOR 16-Tine9.6/10View on Amazon - 4
Lowest WeightLLARGUEST 17-Prong9.5/10View on Amazon - 5
Best Fiberglass HandleVNIMTI 14-Tine9.5/10View on Amazon - 6
Nohovu Garden Rake for GardeningView on Amazon - 7
63" Bow RakeView on Amazon - 8
Garden Leaf RakeView on Amazon - 9
ORIENTOOLS 69" Adjustable Leaf Rake with 5-Section HandleView on Amazon - 10
Leaf Rake and Leaf Bags ComboView on Amazon
The best garden rake is the one whose tine count, head width and handle match the beds and lawn it will work, because a rake that is too narrow or too short turns a Saturday job into a long one. Soil to loosen, mulch to spread and leaves to gather all ask for slightly different tools. This roundup compares 5 garden rakes by tine count, head width, handle length and material, and weight, using only what each listing publishes.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall DIIG 63 in Bow Rake: 17 tines, 2.5 in tines, 17 in head, stainless handle Check price on Amazon
- Best 63 in Handle Lilyvane 63 in Rake: 63 in handle, 17 tines, 2-sided head Check price on Amazon
- Best 16 in Head YEELOR 16-Tine: 16 tines, 16 in head, screw-fastened, rubber grip Check price on Amazon
- Lowest Weight LLARGUEST 17-Prong: 16 oz stated weight, 17 prongs, 16 in head Check price on Amazon
- Best Fiberglass Handle VNIMTI 14-Tine: fiberglass handle, carbon steel head, 14 tines Check price on Amazon
Our acreage picks
DIIG 63 in Bow Rake, 17 Tines, Stainless Handle
Bow rake with 17 tines at 2.5 in long, a 17 in wide head and a stainless steel sectional handle, with a stated 63 in total length.
Who it's for: a gardener who wants the most stated detail here, 17 tines and a stainless sectional handle.
Who should skip it: anyone who wants a stated warranty or a single clear length figure.
Read the full review
The DIIG is a 63 in bow rake with 17 tines, each stated at 2.5 in long, on a 17 in wide head with a stated 3 mm thickness. The handle is stainless steel in multi-section poles that rotate and tighten, so the length adjusts by pole count. The bullets describe an anti-rust and anti-corrosion coating and a triple welded head connection, and the maker offers replies within 12 hours. Two oddities in the listing: the title says 63 in while the spec table lists a pole length of 5FT, and the spec table item dimensions read 1 in by 1 in, which does not describe a rake. Trust the title and bullets for the length and ignore the dimension row. No warranty term appears in the listing.
Pros
- 17 tines at a stated 2.5 in length
- 17 in wide head with a stated 3 mm thickness
- Stainless steel sectional handle, adjustable by pole count
- Triple welded head connection stated
Cons
- Title says 63 in while the spec table lists a 5FT pole length
- Spec table item dimensions of 1 in by 1 in do not describe a rake
- No warranty term is stated
- Heaviest metal rake here at 1.75 kg
Lilyvane 63 in Bow Rake, 17 Tines, Metal
Bow rake with a 63 in sectional metal handle, 17 tines and a 2-sided head for different uses.
Who it's for: a gardener who wants a 63 in sectional handle and a 2-sided head.
Who should skip it: anyone who wants a stated weight or a stated warranty.
Read the full review
The Lilyvane is a 63 in bow rake with 17 metal tines on a 17 in head that is 2-sided for different uses. The handle is sectional metal that screws together, with a stated 1 in rod diameter described as strong enough for light duty work, and the spec table gives dimensions of 17 in by 63 in. The bullets describe rustproof coated metal on the head, tines and handle, and note that loose parts should be rescrewed together. No weight or warranty term appears in the listing.
Pros
- 63 in sectional handle stated
- 17 metal tines stated
- 2-sided head for different uses stated
- Rustproof coated metal stated
Cons
- No weight is stated
- No warranty term is stated
- Tine length is not stated
- 1 in rod diameter is stated for light duty work only
YEELOR 16-Tine Bow Rake, Stainless Handle
Bow rake with 16 tines, a 16 in head fastened with screws and an adjustable stainless steel handle.
Who it's for: a gardener who wants a screw-fastened head and a rubber grip on an adjustable handle.
Who should skip it: anyone who wants 17 tines or a stated warranty.
Read the full review
The YEELOR is a 16-tine bow rake with a stated 16 in head fastened with screws to prevent loosening or falling off. The handle is multi-joint stainless steel that adjusts by pole count, with a rubber grip, and the spec table gives dimensions of 15.7 in by 53 in and a weight of 1.1 kg. Two mismatches appear: the bullets describe premium carbon steel and stainless steel while the spec table lists the head material as aluminum, and the spec table head size reads 15.85 in against the stated 16 in head. Trust the bullets on the materials and the 16 in figure. No warranty term appears in the listing.
Pros
- Head fastened with screws stated to prevent loosening
- Adjustable multi-joint stainless steel handle stated
- Rubber grip stated
- No tools needed for assembly stated
Cons
- Bullets say carbon steel and stainless steel while the spec table lists aluminum as the head material
- Spec table head size of 15.85 in differs from the stated 16 in head
- No warranty term is stated
- 16 tines, fewer than the 17-tine picks
LLARGUEST 17-Prong Rake, 63 in Handle
Rake with 17 prongs on a 16 in head, a 63 in metal handle and the lowest stated weight here at 16 oz.
Who it's for: a gardener who wants the lowest stated weight with 17 prongs.
Who should skip it: anyone who wants a stated warranty or a stated tine length.
Read the full review
The LLARGUEST is a metal rake with 17 prongs on a stated 16 in head and a 63 in handle with a non-slip texture and rubber grip. The spec table gives dimensions of 16 in by 63 in and a weight of 16 oz, the lowest stated here. One mismatch: the spec table rake type reads Leaf Rake while the title and bullets describe a bow rake for loosening soil and leveling lawn. Trust the title and bullets. No warranty term appears in the listing.
Pros
- Lowest stated weight here at 16 oz
- 17 prongs on a 16 in head stated
- 63 in metal handle with non-slip texture stated
- Detachable design stated
Cons
- Spec table rake type reads Leaf Rake while the title describes a bow rake
- No warranty term is stated
- Tine length is not stated
- Model and part numbers read as the word rake
VNIMTI 14-Tine Bow Rake, Fiberglass Handle
Bow rake with 14 tines, a high carbon steel head and a fiberglass handle with 2 non-slip grips, at 58 in total.
Who it's for: a gardener who wants a fiberglass handle and a carbon steel head.
Who should skip it: anyone who wants more tines, a wider head or the lowest weight.
Read the full review
The VNIMTI is a 58 in bow rake with 14 steel tines on a high carbon steel head and a thick fiberglass handle with 2 non-slip grips. The bullets describe tightly welded joints with an anti-rust coating and state the 58 in length suits adult use. The spec table gives a 14.2 in head, a 3.2 lb weight and dimensions of 14.2 in by 58 in. No warranty term appears in the listing.
Pros
- High carbon steel head stated
- Fiberglass handle with 2 non-slip grips stated
- Joints tightly welded with anti-rust coating stated
- 58 in length stated as suited to adult use
Cons
- 14 tines, the fewest here
- No warranty term is stated
- Heaviest stated weight at 3.2 lb
- Narrowest head here at 14.2 in
Other machines to compare
Nohovu Garden Rake for GardeningCheck price on Amazon
63" Bow RakeCheck price on Amazon
Garden Leaf RakeCheck price on Amazon
ORIENTOOLS 69" Adjustable Leaf Rake with 5-Section HandleCheck price on Amazon
Leaf Rake and Leaf Bags ComboCheck price on Amazon
Side-by-side specs
| Model | Acre Score | Tines | Head width | Handle | Weight | Warranty |
|---|---|---|---|---|---|---|
| DIIG 63 in Bow Rake | 9.6/10 | 17 | 17 in | Stainless steel, adjustable | 1.75 kg | Not stated |
| Lilyvane 63 in Rake | 9.6/10 | 17 | 17 in | Metal, sectional | Not stated | Not stated |
| YEELOR 16-Tine | 9.6/10 | 16 | 16 in | Stainless steel, adjustable | 1.1 kg | Not stated |
| LLARGUEST 17-Prong | 9.5/10 | 17 | 16 in | Metal | 16 oz | Not stated |
| VNIMTI 14-Tine | 9.5/10 | 14 | 14.2 in | Fiberglass | 3.2 lb | Not stated |
Specifications are manufacturer rated as listed, collected 22 October 2026.
Acreage and terrain fit
DIIG 63 in Bow Rake
Lilyvane 63 in Rake
YEELOR 16-Tine
LLARGUEST 17-Prong
VNIMTI 14-Tine
Buying guide: choosing the best garden rake
Tine count and head width
Tine counts run from 14 on the VNIMTI to 17 on the DIIG, Lilyvane and LLARGUEST, with the YEELOR at 16. Head widths run from 14.2 in on the VNIMTI to 17 in on the DIIG and Lilyvane, with 16 in on the YEELOR and LLARGUEST. The DIIG is the only listing to state a tine length, 2.5 in, and a head thickness, 3 mm. More tines on a wider head cover ground faster; the DIIG and Lilyvane lead on both figures.
Handle length and material
Stated lengths run from 58 in on the VNIMTI to 63 in on the DIIG, Lilyvane and LLARGUEST, with the YEELOR at 53 in tall per its dimension row. The DIIG and YEELOR state stainless steel sectional handles that adjust by pole count, the Lilyvane and LLARGUEST state metal handles, and the VNIMTI states a fiberglass handle with 2 non-slip grips. The YEELOR adds a rubber grip, and the LLARGUEST states a non-slip texture on its handle. Sectional handles break down for storage; the Lilyvane notes its parts rescrew together if they loosen.
Weight
Stated weights run from 16 oz on the LLARGUEST to 3.2 lb on the VNIMTI, with the YEELOR at 1.1 kg and the DIIG at 1.75 kg. The Lilyvane states no weight. A lighter rake is easier on long sessions of leaf gathering; the LLARGUEST is the lowest stated weight here by a clear margin.
What the listings do not state
None of the five state a warranty term, and none state a certification. The DIIG title says 63 in while its spec table lists a 5FT pole length, the YEELOR bullets say carbon steel and stainless steel while its spec table lists aluminum as the head material, and the LLARGUEST spec table reads Leaf Rake while the title describes a bow rake. Read the bullets against the spec table before ordering; the bullets are the more specific description in each case.
Care and storage
Sectional handles on the DIIG, YEELOR and Lilyvane break down for storage. The DIIG and YEELOR state anti-rust coatings, and the VNIMTI states welded joints with an anti-rust coating. The LLARGUEST is detachable per its title. Rinse soil off after use and store dry; the maker of the DIIG offers replies within 12 hours if questions come up. See the trimmers and blowers hub for more yard tools.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- Vegetable beds and new seedbeds: the DIIG states 2.5 in tines on a 17 in head for loosening and leveling.
- Lawn edges and leaf cleanup: the LLARGUEST states 17 prongs at the lowest stated weight, 16 oz.
- Breaking hard clods: the VNIMTI states a high carbon steel head with tightly welded joints.
- Storage in a small shed: sectional handles on the DIIG, YEELOR and Lilyvane break down; the YEELOR measures 53 in assembled.
The Acre Score explained
The Acre Score weighs five factors: performance (tine count, head width and stated working features), build quality (materials, welds and fasteners), value (specs for a hand tool), safety (stated certifications or guards) and warranty (years and coverage). A factor the listing does not state scores zero. No listing here states a certification or a warranty term, so safety and warranty are zero across the board.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DIIG 63 in Bow Rake | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Lilyvane 63 in Rake | 9.6 | 30 | 20 | 20 | n/a | 0 |
| YEELOR 16-Tine | 9.6 | 29 | 20 | 20 | n/a | 0 |
| LLARGUEST 17-Prong | 9.5 | 29 | 19 | 20 | n/a | 0 |
| VNIMTI 14-Tine | 9.5 | 28 | 20 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
FAQ: mowing large lots
What is a garden rake?
A garden rake is a long-handled tool with a toothed head for loosening soil, leveling, spreading mulch and gathering leaves. The five here are bow rakes with 14 to 17 tines.
How long is a garden rake?
Stated lengths here run from 53 in on the YEELOR dimension row to 63 in on the DIIG, Lilyvane and LLARGUEST, with the VNIMTI at 58 in. Sectional handles adjust by pole count on the DIIG and YEELOR.
How many tines do these rakes have?
The DIIG, Lilyvane and LLARGUEST state 17 tines or prongs, the YEELOR states 16 tines and the VNIMTI states 14 tines.
What if the handle comes loose?
The Lilyvane listing says to rescrew loose parts together. The DIIG and YEELOR use twist-tighten sectional poles, so check the connections before each session.
Which is the lowest weight rake here?
The LLARGUEST states 16 oz, the lowest here. The YEELOR states 1.1 kg, the DIIG states 1.75 kg and the VNIMTI states 3.2 lb; the Lilyvane states no weight.
More mowing guides
- Best Pole Saw Attachment (2026): 5 Picks for High Limbs
- Best Hedge Trimmer Gas: 5 Picks for Clean Hedges
- Best String Trimmer Harness (2026): 5 Picks Compared
- Best Walk Behind String Trimmer (2026): 5 Top Picks Compared
Use the Mower Matcher to narrow down choices by acreage, terrain, budget, and power type.
