Best Ice Chopper (2026): 4 Picks for Driveways and Walkways
4 steel ice choppers for driveways, sidewalks and patios, compared by blade steel, handle, length, weight and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBully Tools 924269.6/10View on Amazon - 2
Best All-SteelBully Tools D-Grip9.6/10View on Amazon - 3
Best Cushioned GripMcKraftis H180B9.5/10View on Amazon - 4
Best MultipurposeEmsco Bigfoot 12079.4/10View on Amazon
A driveway after a freeze is the worst ground on a property: a sheet of ice over concrete that a shovel slides across and a broom cannot move. This guide covers the best ice chopper picks for that ground, comparing steel choppers by blade, handle, length, weight and warranty, so the choice comes down to how thick the ice gets and how much reach the work needs.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall Bully Tools 92426: 7-gauge USA steel, a fiberglass handle and a limited lifetime warranty. Check price on Amazon
- Best All-Steel Bully Tools D-Grip: All-steel 10-gauge build with a 7 in x 7 in blade and a no-slip D-grip. Check price on Amazon
- Best Cushioned Grip McKraftis H180B: Spring-cushioned grip with wrist protection and a 2.3mm carbon steel blade. Check price on Amazon
- Best Multipurpose Emsco Bigfoot 1207: Cold rolled steel head that also knocks down icicles, digs roots and edges lawns. Check price on Amazon
Our acreage picks

Bully Tools 7 in Ice Chopper Floor Scraper, Fiberglass Handle
A 7 in ice chopper and floor scraper with 7-gauge USA steel, a fiberglass handle and a limited lifetime warranty.
Who it's for: a homeowner who wants a USA-made chopper that also scrapes floors and lifts tiles.
Who should skip it: anyone who wants a D-grip for close-control chopping.
The Bully Tools 92426 is a 7 in ice chopper and floor scraper built from 7-gauge 100% American-made steel, with a fiberglass handle coated in polyester veil. The listing says the handle prevents splintering, resists moisture and UV degradation, and the powder coat finish prevents rust. It lists tiles, flooring, ice, mud and demolition among its uses, and it is made in the USA in Steubenville, Ohio, since 1994.
The listing backs it with a limited lifetime warranty covering defects in materials and workmanship. It assembles with a Phillips screwdriver and pliers, and at 3.8 lb with a 58.25 in handle it is a long, light tool.
Pros
- 7-gauge 100% American-made steel blade
- Fiberglass handle with polyester veil prevents splintering
- Powder coat finish prevents rust
- Limited lifetime warranty covering defects in materials and workmanship
Cons
- Straight grip, not a D-grip, so less leverage for close-control chopping
- Ships unassembled; needs a Phillips screwdriver and pliers
- 58.25 in long, so it needs a long storage spot
- No grip cushioning is stated, unlike the spring grip on the McKraftis

Bully Tools 10-Gauge All Steel Ice Chopper, D-Grip, 46 in
An all-steel 10-gauge ice chopper with a 7 in x 7 in blade, a 46 in D-grip handle and a limited lifetime warranty.
Who it's for: a homeowner chopping thick ice on sidewalks and driveways who wants an all-steel tool with a D-grip.
Who should skip it: anyone who wants the longest reach or the thickest blade steel here.
The D-grip Bully is the all-steel pick: a 10-gauge steel blade at 7 in wide by 7 in long, an all-steel handle, and a D-shaped polypropylene no-slip grip the listing says increases leverage and reduces hand fatigue. The listing names sidewalks, driveways and parking lots.
One wrinkle: the title and bullets state a 46 in tool at 5.5 lb, while the spec table lists 48.0 in and 4.5 lb. Trust the title and bullets, and check the length and weight when the tool arrives. The listing backs it with a limited lifetime warranty and says no assembly is required.
Pros
- All-steel handle and blade, 5.5 lb of heft for chopping
- D-shaped polypropylene no-slip grip, wide enough for thick winter work gloves
- 7 in x 7 in blade for thick ice and snow
- Limited lifetime warranty, and no assembly required
Cons
- 10-gauge steel is thinner than the 7-gauge steel here
- Shorter 46 in handle gives less reach than the 58.25 in fiberglass model
- All-steel build has no cushioning for the hands

McKraftis Ice Chopper, Spring-Cushioned, 51 in
A spring-cushioned ice chopper with a 2.3mm carbon steel blade, a 7 in wide blade and a 51 in steel handle.
Who it's for: a homeowner who wants shock absorption for the wrists on a long handle.
Who should skip it: anyone who wants a stated warranty or a multipurpose tool.
The McKraftis is the cushioned pick: a spring-cushioned, non-slip straight grip the listing says protects the wrist, a 2.3mm thick carbon steel blade with a beveled edge, and a 7 in wide blade. The listing gives a 51 in total height.
The listing names driveways, walkways, patios and floors. No warranty term and no weight are stated, so both score 0 here.
Pros
- Spring-cushioned, shock-absorbing grip with wrist protection
- 2.3mm thick carbon steel blade with a beveled edge
- 7 in wide blade balances breaking power and clearing efficiency, per the listing
- 51 in height lets the user push down without bending down, per the listing
Cons
- No warranty term is stated
- No weight is stated
- No blade length is stated, only the 7 in width
- Single purpose ice tool, unlike the multipurpose Emsco

Emsco Bigfoot Ice Chopper and Lawn Edger, 59.0 in
A multipurpose ice chopper and lawn edger with a heavy cold rolled steel head, an extra long pole and a cushioned D-grip.
Who it's for: a homeowner who wants a tool for ice, edging and odd yard jobs.
Who should skip it: anyone who wants the thickest blade steel or a stated warranty.
The Emsco Bigfoot is the multipurpose pick: a heavy, industrial cold rolled steel head with a reinforced, polished edge the listing says is flat and sharp, an extra long pole for leverage, and an extra large cushioned D-grip. It weighs 2.0 lb.
The listing names ice and snow, then icicles, plant roots, edging, shingle removal and more. No warranty term is stated, and no blade thickness is stated.
Pros
- Heavy, industrial cold rolled steel head for heavy impacts
- Extra long 59.0 in pole for leverage and hard to reach spots
- Extra large cushioned D-grip to help prevent injury to hands, wrists and shoulders
- Multipurpose: knocks down icicles, digs roots, edges lawns and removes shingles
Cons
- No warranty term is stated
- No blade thickness is stated
- At 2.0 lb it is lighter than the Bully models, so it carries less chopping heft
- The 59.0 in pole needs the longest storage spot here
Best Ice Chopper Picks Compared
| Model | Acre Score | Blade | Handle | Length | Weight | Warranty |
|---|---|---|---|---|---|---|
| Bully Tools 92426 | 9.6/10 | 7 in, 7-gauge steel | Fiberglass | 58.25 in | 3.8 lb | Limited lifetime |
| Bully Tools D-Grip | 9.6/10 | 7 in x 7 in, 10-gauge | All steel, D-grip | 46 in | 5.5 lb | Limited lifetime |
| McKraftis H180B | 9.5/10 | 7 in, 2.3mm steel | Steel, spring grip | 51 in | Not stated | Not stated |
| Emsco Bigfoot 1207 | 9.4/10 | Cold rolled steel | Long pole, D-grip | 59.0 in | 2.0 lb | Not stated |
Every figure repeats what the brand’s listing states (10 November 2026).
Acreage and terrain fit
Bully Tools 92426
Bully Tools D-Grip
McKraftis H180B
Emsco Bigfoot 1207
Buying guide: choosing an ice chopper
Blade steel and width
Blade steel decides how the edge holds up against ice. The fiberglass Bully uses 7-gauge 100% American-made steel, the D-grip Bully uses 10-gauge steel, the McKraftis uses a 2.3mm carbon steel blade with a beveled edge, and the Emsco uses heavy, industrial cold rolled steel with a reinforced, polished edge. Blade width is 7 in on both Bully models and the McKraftis; the Emsco listing states no blade width.
Handle length and grip
Handle length sets the reach and the leverage. The Emsco pole runs 59.0 in, the fiberglass Bully runs 58.25 in, the McKraftis runs 51 in, and the D-grip Bully runs 46 in. Grips differ too: the McKraftis has a spring-cushioned straight grip with wrist protection, the D-grip Bully has a D-shaped polypropylene no-slip grip, the Emsco has an extra large cushioned D-grip, and the fiberglass Bully has a handle coated in polyester veil.
Weight and heft
Weight is the heft behind each chop. The D-grip Bully lists 5.5 lb, the fiberglass Bully lists 3.8 lb, and the Emsco lists 2.0 lb. The McKraftis lists no weight. A heavier tool does more of the work on thick ice, while a lighter tool is easier to carry.
Warranty and build
Warranty is the split in this roundup. Both Bully listings carry a limited lifetime warranty, and the fiberglass Bully listing says it covers defects in materials and workmanship. The McKraftis and the Emsco list no warranty term, so both score 0 for warranty.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- Driveways and parking lots: the D-grip Bully lists sidewalks, driveways and parking lots, and its 46 in handle suits close-control chopping.
- Patios and floors: the McKraftis lists driveways, walkways, patios and floors, and the fiberglass Bully lists tiles, flooring, ice and mud.
- Thick ice: the all-steel D-grip at 5.5 lb and the 7-gauge fiberglass Bully are the picks the listings pitch for thick layers.
- Storage: the 59.0 in Emsco and the 58.25 in Bully need a long wall or corner.
- Odd jobs: the Emsco also knocks down icicles, digs out plant roots, edges lawns and removes shingles.
The Acre Score explained
The Acre Score weighs five factors: performance (blade steel, width and chopping power), build quality (handle, grip and finish), value (specs for the money), safety (grip features that protect hands and wrists) and warranty (years and coverage). A factor the listing does not state scores zero. How we pick explains the weights.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bully Tools 92426 | 9.6 | 30 | 22 | 20 | 3 | 4 |
| Bully Tools D-Grip | 9.6 | 29 | 21 | 20 | 3 | 4 |
| McKraftis H180B | 9.5 | 28 | 20 | 19 | 4 | 0 |
| Emsco Bigfoot 1207 | 9.4 | 26 | 19 | 19 | 3 | 0 |
We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower.
FAQ: mowing large lots
How do you use an ice chopper?
Stand over the ice, grip the handle with both hands, and push down to chop at the edge of the sheet, then scrape the loosened pieces clear. The McKraftis listing says its 51 in height lets the user push down with force without bending down, and the D-grip Bully listing says its D-grip suits close-control chopping. Work a small section at a time.
Do ice choppers work on thick ice?
The listings here say they do. The D-grip Bully listing says its all-steel build and 5.5 lb weight give the heft for thick ice, and the fiberglass Bully listing says its 7-gauge steel delivers heavy duty performance on ice. The McKraftis listing says its beveled 2.3mm blade gives a powerful cut. Thick layers take repeated chopping.
What is the difference between an ice chopper and a floor scraper?
An ice chopper is built to break ice, while a floor scraper is built to lift flooring. The fiberglass Bully does both: the listing names tiles, flooring, ice, mud and demolition. The Emsco is also a lawn edger. If the job is only ice, any pick here works.
Which ice chopper is best for thick ice?
The D-grip Bully, with its all-steel build, 7 in x 7 in blade and 5.5 lb weight, is the pick the listing pitches for thick ice and snow on sidewalks, driveways and parking lots. The fiberglass Bully is the other pick for thick ice, with 7-gauge steel and a limited lifetime warranty.
More mowing guides
- Best Shovel for Snow Removal (2026)
- Manual Snow Pusher: How to Choose One
- Best Shear Pins for Snow Blower (2026)
- Best Snow Shovel for Sidewalks (2026): 4 Picks Compared
- Snow Blower Maintenance: Seasonal Care Checklist
- Best Snow Blower Chute Clearing Tool (2026)
- Best Skid Shoes for Snow Blower (2026): 5 Picks by Fit and Material
- Best Push Broom for Snow (2026)
- Best Roof Snow Rake (2026)




