Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Rain Sensor (2026): 4 Picks for Sprinkler Systems

4 rain sensors for sprinkler systems compared by shutoff, rainfall setting, wire or wireless fit and mounting, with a replacement transmitter for an existing Hunter receiver.

Best Rain Sensor (2026): 4 Picks for Sprinkler Systems
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Hunter Rain-Clik WRCLIKBest OverallHunter Rain-Clik WRCLIK9.6/10View on Amazon
  2. 2Rain Bird WR2Best 48-Hour HoldRain Bird WR29.4/10View on Amazon
  3. 3Rain Bird CPRSDBEXBest WiredRain Bird CPRSDBEX9.4/10View on Amazon
  4. 4SPWANZHEN WRCLIK-TRBest Replacement PartSPWANZHEN WRCLIK-TR9.2/10View on Amazon

A lawn that waters itself on a schedule still needs a way to stop when rain arrives, or the sprinklers run through a storm and soak ground that is already wet. A rain sensor watches for rain and tells the controller to hold off until the sensor dries. The best rain sensor for a property fits the controller, the mounting spot and the climate, and the picks below cover wireless and wired models, rain-only and rain-and-freeze shutoff, plus a replacement transmitter for an existing Hunter receiver.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Quick picks

  • Best Overall Hunter Rain-Clik WRCLIK: Wireless rain and freeze shutoff at 37°F, built-in battery, adjustable vent reset Check price on Amazon
  • Best 48-Hour Hold Rain Bird WR2: Wireless sensor that holds irrigation off for 48 hours after rainfall, with freeze shutoff Check price on Amazon
  • Best Wired Rain Bird CPRSDBEX: Rainfall dial from 1/8 in to 3/4 in, side vent ring, 25 ft of wire Check price on Amazon
  • Best Replacement Part SPWANZHEN WRCLIK-TR: Replacement transmitter for an existing WRCLIK receiver, Rain only and Rain Freeze Check price on Amazon

Our acreage picks

Hunter Rain-Clik WRCLIK Wireless Rain and Freeze Sensor

Hunter Rain-Clik WRCLIK Wireless Rain and Freeze Sensor

Hunter9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Wireless rain and freeze sensor with a built-in battery, freeze shutoff at 37°F, an adjustable vent for reset time, and wall and gutter mounting.

Who it's for: owners who want wireless rain and freeze shutoff with no wiring to run.

Who should skip it: anyone whose controller lacks a sensor port.

The Hunter Rain-Clik WRCLIK is a wireless rain and freeze sensor for sprinkler systems, with Quick Response technology that stops watering the moment rain begins or temperatures fall to 37°F. It runs on a built-in battery, mounts on a gutter, wall, fence or eave with the included wall mount and gutter bracket, and uses an adjustable vent to set how quickly watering resumes. The maker states it works with most standard sprinkler controllers. It weighs 0.9 pounds and measures 5.0 inches by 7.0 inches by 10.0 inches.

Pros

  • Rain and freeze shutoff in a wireless unit
  • Built-in battery means no wiring or trenching
  • Freeze shutoff at 37°F protects the lawn from freeze damage
  • Adjustable vent lets the owner set how quickly watering resumes

Cons

  • No warranty term is stated
  • Wireless range is not stated
  • Needs a controller with a sensor port
  • Reset time needs the vent set by hand
Rain Bird WR2 Rain and Freeze Sensor, 48-Hour Hold

Rain Bird WR2 Rain and Freeze Sensor, 48-Hour Hold

Rain Bird9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Wireless rain and freeze sensor that holds irrigation off for 48 hours after rainfall, with a freeze sensor and an icon-driven interface.

Who it's for: owners who want watering held off for 48 hours after rain with freeze shutoff.

Who should skip it: anyone who needs stated dimensions or a stated freeze set point.

The Rain Bird WR2 is a wireless rain and freeze sensor that prevents irrigation for 48 hours after rainfall and shuts off irrigation when temperature drops below the set point. The maker claims it saves up to 35 on water usage and helps meet local mandates to avoid fines. It has an icon-driven interface for easy programming. Weight, dimensions and battery details are not stated.

Pros

  • Holds irrigation off for 48 hours after rainfall
  • Freeze sensor shuts off irrigation below the set point
  • Wireless, so no wire run to the controller
  • Icon-driven interface for easy programming

Cons

  • No warranty term is stated
  • Weight and dimensions are not stated
  • The freeze set point figure is not stated
  • Battery type and mounting hardware are not stated
Rain Bird CPRSDBEX Wired Rain Sensor with Mounting Bracket

Rain Bird CPRSDBEX Wired Rain Sensor with Mounting Bracket

Rain Bird9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Wired rain sensor with a rainfall dial from 1/8 in to 3/4 in, a side vent ring, a UV-resistant body on an aluminum bracket, and 25 ft of extension wire.

Who it's for: owners with a controller close by who want a wired sensor with a dial setting.

Who should skip it: anyone who needs freeze shutoff or a wireless mount far from the controller.

The Rain Bird CPRSDBEX is a wired rain sensor that shuts off and restarts the sprinkler system when it rains. A twist of the dial sets the rainfall amount from 1/8 in to 3/4 in, and an adjustable side vent ring lets the sensor dry out after it collects water. It has a UV-resistant body on an aluminum bracket and includes 25 ft of UV-resistant extension wire. It weighs 0.0059 pounds and measures 3.6 inches by 2.0 inches by 7.25 inches.

Pros

  • Rainfall dial adjusts from 1/8 in to 3/4 in
  • Side vent ring lets the sensor dry out after it collects water
  • UV-resistant body on an aluminum bracket stands up to harsh environments
  • Includes 25 ft of UV-resistant extension wire

Cons

  • Wired, so the controller must sit within reach of the 25 ft wire
  • No freeze shutoff is stated
  • Dial setting must be checked and set by hand
  • Mounts on a bracket, with no gutter mount stated
SPWANZHEN WRCLIK-TR Replacement Transmitter Only

SPWANZHEN WRCLIK-TR Replacement Transmitter Only

SPWANZHEN9.2/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Replacement transmitter for an existing WRCLIK receiver, for Rain only and Rain Freeze WRFCLIK systems, with a red LED and hydrostatic disks.

Who it's for: owners with a WRCLIK receiver that needs a new transmitter.

Who should skip it: anyone who needs a full sensor kit or whose receiver has a dangling wire antenna.

The SPWANZHEN WRCLIK-TR is a replacement transmitter for an existing WRCLIK receiver, not a full sensor kit. It works with the Rain only and the Rain Freeze WRFCLIK receiver, and it does not fit a receiver with a dangling wire type antenna. When the red LED does not come on, set the sensor in the sun with the vent open all the way, and let the hydrostatic disks dry before pairing. It weighs 0.5 pounds and measures 8.0 inches by 1.0 inches by 4.0 inches.

Pros

  • A transmitter swap for an existing WRCLIK receiver
  • Works with Rain only and Rain Freeze WRFCLIK receivers
  • Red LED gives a visible signal when the spindle is pressed
  • Vent opens all the way so the disks can dry in the sun

Cons

  • Transmitter only, not a full sensor kit
  • Does not fit a receiver with a dangling wire type antenna
  • Needs an existing WRCLIK receiver to work at all
  • Disks must dry before the unit can pair with a receiver

Side-by-side specs

Model Acre Score Type Rain shutoff Freeze shutoff Rainfall setting Wire or wireless Warranty
Hunter Rain-Clik WRCLIK 9.6/10 Wireless rain and freeze sensor At rain onset At 37°F Adjustable vent reset Wireless, built-in battery Not stated
Rain Bird WR2 9.4/10 Wireless rain and freeze sensor At rain onset Below set point 48-hour hold Wireless Not stated
Rain Bird CPRSDBEX 9.4/10 Wired rain sensor At rain onset Not stated 1/8 to 3/4 in dial Wired, 25 ft wire Not stated
SPWANZHEN WRCLIK-TR 9.2/10 Replacement transmitter only Through existing receiver Through existing receiver Not stated Wireless transmitter Not stated

Every figure repeats what the brand’s listing states (22 November 2026).

Acreage and terrain fit

Hunter Rain-Clik WRCLIK

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatWet ground

Rain Bird WR2

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatWet ground

Rain Bird CPRSDBEX

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatWet ground

SPWANZHEN WRCLIK-TR

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatWet ground

How the picks were scored

The Acre Score weighs performance (rain and freeze shutoff, rainfall setting, mounting), build quality (housing, bracket and wire), value (stated specs for the money), safety (freeze shutoff where stated) and warranty (years and coverage where stated). A factor the listing does not state scores zero.

Product Acre Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Hunter Rain-Clik WRCLIK 9.6 30 21 20 4 0
Rain Bird WR2 9.4 28 19 19 3 0
Rain Bird CPRSDBEX 9.4 29 21 20 0 0
SPWANZHEN WRCLIK-TR 9.2 21 16 16 0 0

We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower.

Buying guide: choosing the best rain sensor

Wireless or wired

The Hunter Rain-Clik and the Rain Bird WR2 are wireless, and the Hunter runs on a built-in battery with no wiring or trenching. The Rain Bird CPRSDBEX is wired and includes 25 ft of UV-resistant extension wire. Wireless suits a mounting spot far from the controller; wired suits a short run.

Rain and freeze shutoff

The Hunter stops watering the moment rain begins and when temperatures fall to 37°F. The WR2 shuts off irrigation below the set point and holds watering off for 48 hours after rainfall. The CPRSDBEX shuts off and restarts the system when it rains, with no freeze shutoff stated. Where nights turn cold, a freeze sensor earns its place.

Rainfall setting and reset time

The CPRSDBEX lets the owner twist a dial to set the rainfall amount from 1/8 in to 3/4 in, and its side vent ring lets the sensor dry out after it collects water. The Hunter uses an adjustable vent to choose how quickly watering resumes after rain. The WR2 holds irrigation off for 48 hours after rainfall, and the maker claims water savings of up to 35.

Mounting and controller fit

The Hunter includes a wall mount and a gutter bracket and mounts on a gutter, wall, fence or eave, and the maker states it works with most standard sprinkler controllers using normally open or normally closed sensor ports. The CPRSDBEX mounts on an aluminum bracket and connects to most irrigation system controllers. See the smart sprinkler controller roundup when the controller itself needs an upgrade.

Replacement transmitters

The SPWANZHEN unit is a replacement transmitter only, not a full sensor kit, and it suits an existing WRCLIK receiver. It works with the Rain only and the Rain Freeze WRFCLIK receiver, and it does not fit a receiver with a dangling wire type antenna. When the red LED does not come on, set the sensor in the sun with the vent open all the way, and let the hydrostatic disks dry before pairing. For a full irrigation refresh, see the irrigation system roundup.

Mowing safety

Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.

Matching It to Your Property

  • Flat lawns with a controller nearby suit the wired Rain Bird, since its 25 ft wire reaches the controller.
  • Properties with beds, fences and eaves suit the wireless Hunter, which mounts on a gutter, wall, fence or eave.
  • Cold nights suit the Hunter and the WR2, since each shuts off irrigation in freezing weather.
  • Keep a spare transmitter on the shelf where a WRCLIK receiver already runs.

FAQ: mowing large lots

What does a rain sensor do?

A rain sensor stops the sprinkler system when rain begins and lets it resume after the rain passes. The Hunter stops watering the moment rain begins, the CPRSDBEX shuts off and restarts the system when it rains, and the WR2 prevents irrigation for 48 hours after rainfall.

How does a rain sensor work?

The sensor collects rain, then signals the controller to hold watering until it dries. The CPRSDBEX uses a dial to set the rainfall amount from 1/8 in to 3/4 in and a side vent ring that lets the sensor dry out after it collects water. The Hunter uses an adjustable vent to set how quickly watering resumes, and the SPWANZHEN transmitter uses hydrostatic disks that must dry before the unit can pair with a receiver.

Wired or wireless rain sensor: which suits a lawn?

A wireless sensor suits a mounting spot far from the controller, since the Hunter runs on a built-in battery and the WR2 needs no wire run. A wired sensor suits a short run, since the CPRSDBEX includes 25 ft of UV-resistant extension wire. Either way, the controller needs a sensor port.

How to replace a rain sensor transmitter

Match the replacement to the receiver on the property. The SPWANZHEN transmitter fits an existing WRCLIK receiver, works with the Rain only and the Rain Freeze WRFCLIK receiver, and does not fit a receiver with a dangling wire type antenna. Set the sensor in the sun with the vent open all the way when the red LED does not come on.

More mowing guides

More buying guides