Best T Post Puller: 5 Picks for Fence Posts
5 T post pullers and plates compared by capacity, chain length, steel and base, with an Acre Score for each pick.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBISupply T Post Puller9.7/10View on Amazon - 2
Best Complete KitVEVOR 36 in T Post Puller9.6/10View on Amazon - 3
Best Leverage KitLOADSECRTOOL T Post Puller9.5/10View on Amazon - 4
Best PlateWenses T-Post Puller Plate9.5/10View on Amazon - 5
Best All-Size PlateTNCZHYLX T Post Puller9.4/10View on Amazon
An old fence line leaves posts that refuse to move: T-posts set deep in clay, wooden posts sunk beside a gate, and stumps where a fence once stood. Pulling them by hand strains the back and wastes an afternoon, and a post that snaps below ground leaves a stub to dig out later. The best t post puller turns that job into a short lever pull, lifting the post straight out of the ground while the plate and chain do the heavy work.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall BISupply T Post Puller: Highest Acre Score here: 1,764 lb capacity, 36 in leverage and a 5 in base Check price on Amazon
- Best Complete Kit VEVOR 36 in T Post Puller: Puller, plate and 47 in chain with a 660 lb rating and a widened base Check price on Amazon
- Best Leverage Kit LOADSECRTOOL T Post Puller: Lever puller with plate and chain for round posts, stakes and stumps Check price on Amazon
- Best Plate Wenses T-Post Puller Plate: 9/16 in carbon steel plate that fits posts up to 1.8 in wide Check price on Amazon
- Best All-Size Plate TNCZHYLX T Post Puller: Plate that claims to fit all sizes of metal posts and chain gauges Check price on Amazon
Our acreage picks

BISupply 36 in T Post Puller, 1,764 lb Capacity
36 in steel T post puller rated to 1,764 lb, with a 5 in base, for T-posts, wood posts, cement plugs and small stumps.
Who it's for: owners pulling T-posts, wood posts, cement plugs or small stumps.
Who should skip it: anyone who wants a lifting chain included or a stated warranty.
The BISupply puller is a 36 in steel tool rated to 1,764 lb (800 kg), with a 5 in (12.7 cm) base and a powder-coated finish. The listing describes standing the tool upright with the handle near waist height, fitting the remover lock around a stud and pushing the handle down to lift the post, then refitting lower and repeating.
Pros
- Rated capacity of 1,764 lb, the highest stated here
- 36 in handle applies leverage to conserve strength
- 5 in base adds sturdiness and stands upright for storage
- Powder coating helps prevent wear
Cons
- No warranty term is stated
- No lifting chain is listed as included
- No maximum post width is stated
- No stated limit for stump size

VEVOR 36 in T Post Puller with Plate and 47 in Chain
36 in steel T post puller with plate and 47 in lifting chain, rated to 660 lb, with a widened base and a powder-coated finish.
Who it's for: owners who want a complete kit for T-posts, round and square fence posts, sign posts and stumps.
Who should skip it: anyone who needs a higher stated capacity.
The VEVOR puller is a 36 in steel tool with a plate and a 47 in lifting chain, rated to 660 lb (300 kg). The listing describes a lever effort-saving mechanism, a widened base that keeps force directed vertically, and a vertical design with fewer parts than stump or ground rod pullers. Weight is 22.16 lb.
Pros
- Rated to 660 lb (300 kg) without bending, per the listing
- Plate and 47 in lifting chain included
- Widened base spreads ground contact and resists tipping
- Powder-coated surface resists rust and wear
Cons
- No warranty term is stated
- Lower stated capacity than the BISupply pick
- No maximum post width is stated
- No stated limit for stump size

LOADSECRTOOL T Post Puller with Plate and Lifting Chain
36 in T post puller with plate and lifting chain, built on leverage, for round fence posts, T stakes, sign posts and tree stumps.
Who it's for: owners who want a simple lever puller with plate and chain for round posts and stumps.
Who should skip it: anyone who wants a stated capacity or a stated warranty.
The LOADSECRTOOL puller is a 36 in T post puller with a plate and a lifting chain, built on the principle of leverage. The listing contradicts itself on chain length: the title says 47 in and the included list says 49 in. Capacity, weight and dimensions are not stated.
Pros
- Plate and lifting chain included in the kit
- Leverage design is simple to use, per the listing
- Vertical storage for carrying and storing
- Suits round fence posts, T stakes, sign posts and stumps
Cons
- No capacity is stated
- No weight or dimensions are stated
- No warranty term is stated

Wenses T-Post Puller Plate, 9/16 in Carbon Steel
Heavy-duty carbon steel puller plate, 9/16 in thick, that fits studded T-posts up to 1.8 in wide and works with chains up to 5/16 in.
Who it's for: owners who already own a high-lift jack or chain and want a tough plate for T-posts.
Who should skip it: anyone who wants a complete puller with a handle and chain included.
The Wenses plate is a puller plate, not a complete puller: it is cut from 9/16 in carbon steel with a powder-coated finish in bright orange. The listing says it fits studded T-posts up to 1.8 in wide and works with most high-lift jacks or chains up to 5/16 in. No capacity, weight or dimensions are stated.
Pros
- Cut from thick 9/16 in carbon steel
- Fits studded T-posts up to 1.8 in wide
- Works with most high-lift jacks or chains up to 5/16 in
- Bright orange powder-coated finish is easy to spot in grass or mud
Cons
- Plate only: needs a jack or chain, which are not included
- No capacity is stated
- No warranty term is stated
- No weight or dimensions are stated

TNCZHYLX T Post Puller Plate for Metal Posts
Carbon steel T-post puller plate that claims to fit all sizes of metal posts and chain gauges, for T-posts, stumps and piles.
Who it's for: beginners and gardeners who want a simple plate for T-post removal.
Who should skip it: anyone who wants stated specs or a complete puller kit.
The TNCZHYLX puller is a carbon steel plate that the listing says can be used as a stump puller, pile puller and chain puller, and that fits all sizes of metal posts and chain gauges. The listing gives no capacity, no dimensions and no material thickness, and the warranty description reads only '36' with no unit, so no warranty term can be quoted.
Pros
- Claims to fit all sizes of metal posts and chain gauges
- Works as a stump puller, pile puller and chain puller, per the listing
- Designed to reduce strain on back and arms
- Simple design suited to beginners, per the listing
Cons
- No capacity, dimensions or material thickness is stated
- No chain, jack or handle is listed as included
- No usable warranty term is stated
- The fits-all-sizes claim has no stated post width to check
Other machines to compare
T-Post Puller Fence Post PullerCheck price on Amazon
HNeekyr T Post Puller PlateCheck price on Amazon
Yararday 36" T-Post Puller Fence Post PullerCheck price on Amazon
Hi-Lift Post-Popper Post Puller PP-300Check price on Amazon
Side-by-side specs
| Model | Acre Score | Type | Capacity | Chain | Base | Warranty |
|---|---|---|---|---|---|---|
| BISupply T Post Puller | 9.7/10 | Complete puller | 1,764 lb | Not stated | 5 in | Not stated |
| VEVOR 36 in T Post Puller | 9.6/10 | Complete puller | 660 lb | 47 in | Widened | Not stated |
| LOADSECRTOOL T Post Puller | 9.5/10 | Complete puller | Not stated | 47 in | Not stated | Not stated |
| Wenses T-Post Puller Plate | 9.5/10 | Plate only | Not stated | Not stated | Not stated | Not stated |
| TNCZHYLX T Post Puller | 9.4/10 | Plate only | Not stated | Not stated | Not stated | Not stated |
These specs are rated by each maker and quoted from the listing on 12 November 2026.
Acreage and terrain fit
BISupply T Post Puller
VEVOR 36 in T Post Puller
LOADSECRTOOL T Post Puller
Wenses T-Post Puller Plate
TNCZHYLX T Post Puller
Buying guide: choosing the best t post puller
Capacity and leverage
Capacity is the clearest split. The BISupply listing rates its puller to 1,764 lb (800 kg), while the VEVOR listing rates its puller to 660 lb (300 kg). The other listings state no capacity. Each complete puller here measures 36 in.
Complete puller or plate only
The BISupply, VEVOR and LOADSECRTOOL picks are complete pullers with a handle, while the Wenses and TNCZHYLX picks are plates only. A plate needs a high-lift jack or a chain from the shed, so it suits owners who already own that gear. For more ground-work tools, see the top rated garden tillers and cultivators roundup.
Chain length and post fit
The VEVOR kit includes a 47 in lifting chain. The LOADSECRTOOL listing disagrees with itself, saying 47 in in the title and 49 in in the included list, so treat its chain length as uncertain. The Wenses plate fits studded T-posts up to 1.8 in wide and works with chains up to 5/16 in.
Base and stability
A puller needs a base that stays put while the handle goes down. The VEVOR listing describes a widened base that gives greater ground contact and keeps force directed vertically. The BISupply listing gives a 5 in (12.7 cm) base.
Steel and finish
Every listing here describes steel construction. The VEVOR listing describes reinforced steel with a powder-coated surface that resists rust and wear, and the BISupply listing describes heavy-duty steel with a powder coating that helps prevent wear. The Wenses plate is cut from 9/16 in carbon steel in bright orange. The TNCZHYLX listing says carbon steel but gives no thickness.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- Deep-set posts on rough ground: the BISupply and VEVOR pullers bring a base and a handle, so the pull stays vertical.
- Stumps and old fence runs: the VEVOR, LOADSECRTOOL and BISupply listings all cover stump removal as well as posts.
- Posts of mixed widths: the Wenses plate fits studded T-posts up to 1.8 in wide, while the TNCZHYLX plate claims all sizes without stating a width.
- A crowded shed: the VEVOR and LOADSECRTOOL listings describe a vertical design that saves space, and the Wenses plate is easy to spot in bright orange.
The Acre Score explained
The Acre Score weighs performance (capacity, leverage and what each puller can remove), build quality (steel, base and finish), value (specs for the money), safety (stated safety features) and warranty (term and coverage). A factor the listing does not state scores zero.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BISupply T Post Puller | 9.7 | 32 | 21 | 21 | n/a | 0 |
| VEVOR 36 in T Post Puller | 9.6 | 30 | 21 | 21 | n/a | 0 |
| LOADSECRTOOL T Post Puller | 9.5 | 27 | 19 | 20 | n/a | 0 |
| Wenses T-Post Puller Plate | 9.5 | 24 | 21 | 20 | n/a | 0 |
| TNCZHYLX T Post Puller | 9.4 | 23 | 18 | 19 | n/a | 0 |
The bottom of our scale is 9.2 and the top is 9.8; weighted totals map onto it in a straight line, keeping their order. Powered machines get safety points, as do listings that name safety features; manual items are scored out of 90.
FAQ: mowing large lots
How to use a fence post puller?
Stand the tool upright with the handle near waist height, fit the remover lock around a stud, and push the handle down to pull the post upward. Then raise the handle, fit the lock around a lower stud, and repeat until the post comes free. That sequence comes from the BISupply listing.
How does a fence post puller work?
A fence post puller uses leverage: a handle pivots against a base or a plate, and the pull lifts the post straight up instead of dragging it sideways. The VEVOR listing says its widened base keeps all force directed vertically, which stops the post from binding.
How does a T post puller work?
A T post puller grips the studs on a T-post with a plate or a lock, then a lever or a jack lifts the plate and the post rises with it. The Wenses plate locks onto studded T-posts up to 1.8 in wide, while the BISupply puller fits its lock around a stud and lifts as the handle goes down.
What is a fence post driver?
A fence post driver is the tool for setting posts, while a puller is the tool for removing them. The picks here are pullers, not drivers. For drivers, see the best long handle post driver roundup and the best handheld post driver roundup.
Can a T post puller remove a tree stump?
The VEVOR, LOADSECRTOOL and BISupply listings all describe removing small tree stumps as well as posts. None of them states a stump size limit, so a large stump may still need other tools.
More mowing guides
- Best Long Handle Post Driver (2026): 5 Fence Picks
- Best Handheld Post Driver (2026): 5 Picks for Fence Work
- Best Gas Post Hole Digger (2026): 5 Picks for Fences and Planting
- Best Electric Post Hole Digger (2026): 4 Picks for Fence Posts and Planting
- Best Gas Post Hole Digger Under 200 (2026): 5 Picks for Fences
- Best Weed Puller for Dandelions (2026): 5 Picks by Claw Count
- Top Rated Garden Tillers and Cultivators (2026): 5 Picks Compared




