Horizontal vs Vertical Shaft Engine: Which Should You Buy?
A guide to horizontal and vertical shaft engines: which shaft fits the machine, and 4 horizontal shaft engines compared by HP, shaft size and start.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Briggs & Stratton Vanguard 18 HP 570cc Horizontal Shaft Engine9.6/10View on Amazon - 2
Briggs & Stratton 44S977-0032-G1 25 GHP Vertical Shaft Engine9.5/10View on Amazon - 3
Predator 6.5 HP 212cc OHV Horizontal Shaft Gas Engine9.5/10View on Amazon - 4
maXpeedingrods 7HP 212cc Gas EngineView on Amazon - 5
Serendicy Gas EngineView on Amazon - 6
Aceup Energy Gas Engine Horizontal Shaft 459ccView on Amazon - 7
BILT HARD 23HP Gas EngineView on Amazon - 8
DuroMax XP20HP 500cc 1-Inch Horizontal Shaft Recoil Start GasView on Amazon - 9
NEBEUUO 4 Stroke for Honda GX160 Gas Engine 200CC MotorView on Amazon
A horizontal shaft engine has its shaft sticking out sideways, and a vertical shaft engine has its shaft pointing down. The machine decides which shaft fits: the listings here name log splitters, generators, pressure washers, tillers and lawn mowers as uses for horizontal shaft engines. Match the shaft orientation, the shaft diameter and the keyway to the machine before ordering, because the wrong orientation will not bolt up.
Other machines to compare
maXpeedingrods 7HP 212cc Gas EngineCheck price on Amazon
Serendicy Gas EngineCheck price on Amazon
Aceup Energy Gas Engine Horizontal Shaft 459ccCheck price on Amazon
BILT HARD 23HP Gas EngineCheck price on Amazon
DuroMax XP20HP 500cc 1-Inch Horizontal Shaft Recoil Start GasCheck price on Amazon
NEBEUUO 4 Stroke for Honda GX160 Gas Engine 200CC MotorCheck price on Amazon
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Horizontal vs vertical shaft engine: the short answer
A horizontal shaft engine mounts with the crankshaft level, so the shaft sticks out sideways and drives a belt or a pump. A vertical shaft engine mounts with the crankshaft upright, so the shaft points down and drives from below. The listings here show the horizontal side: all 4 engines are horizontal shaft, for log splitters, generators, pressure washers, tillers and lawn mowers. The machine manual names the orientation it needs, so check the manual before ordering.
| Feature | Horizontal shaft | Vertical shaft |
|---|---|---|
| Shaft direction | Sticks out sideways | Points down |
| Drives | Belt or pump | From below |
| Typical machines | Log splitter, generator, pressure washer, tiller, lawn mower | Not stated in these listings |
| Engines listed here | 4 horizontal shaft engines | None listed here |
The gear: 4 horizontal shaft engines
| Engine | HP | Displacement | Shaft | Start | Warranty |
|---|---|---|---|---|---|
| Aceup Energy 459cc | 18 | 459cc | 1 in | Electric, recoil | 1-year limited |
| GENMAX GM420E | 15 | 420cc | 1 in | Electric, recoil | 2-year limited service plan |
| maXpeedingrods MXR212E | 7 | 212cc | 3/4 in | Electric, recoil | Not stated |
| Serendicy 7.5 HP | 7.5 | 212CC | 20mm | Electric, recoil | Not stated |
The Aceup Energy 459cc is the strongest engine here at 18HP, with a 1 in shaft, 3.48 in long, a 3/8-24 UNF end and a 1/4 in keyway. The listing states a 3600 RPM, 4 stroke OHV engine with electric and recoil start, a 1.7 gallon fuel tank, a steel camshaft, forged crankshafts and cast iron cylinder liners. The engine is EPA compliant and backed by a 1-year limited warranty. Who it is for: owners who need the most power here for a log splitter, pressure washer or tiller. Who should skip it: anyone who needs a 3/4 in shaft or a longer warranty term.
The GENMAX GM420E is a 15HP, 420cc engine with a 1 in shaft, 3.48 in long, a 1/4 in keyway and a 3/8-24 UNF thread. The listing states a max torque of 18.1 ft.-lb at 2500 RPM, a cast iron cylinder sleeve, a forged crankshaft, a 1.59-gallon fuel tank and a built-in supply shut-off valve. The engine comes with a 2-year limited service plan and lifetime technical support. Who it is for: owners who want the longest stated service plan here. Who should skip it: anyone who needs a 3/4 in shaft or a stated EPA certification.
The maXpeedingrods MXR212E is a 7HP, 212cc engine with a 3/4 in shaft, 2.43 in long, a 3/16 in keyway and a 5/16-24 drilled and tapped end. The listing states electric and recoil start, a 3.6L fuel tank, a 0.6L oil capacity, EPA certification and a low oil sensor that shuts the engine down. Who it is for: owners who need a 3/4 in shaft with electric start and EPA certification. Who should skip it: anyone who needs more than 7HP or a stated warranty term.
The Serendicy is a 7.5 HP, 212CC engine with a 20mm shaft and 3600 RPM. The listing states a single-cylinder, 4-stroke design, dual start options, a 3.6L fuel tank and a forced air cooling system. The listing also states a 100-hour continuous endurance run with minimal wear. The title states 212CC while the bullets state 210ml displacement, and the listing notes the 20mm shaft is less common than the standard 3/4 in shaft, so an adapter may be required. Who it is for: owners whose machine takes a 20mm shaft. Who should skip it: anyone who needs a standard 3/4 in shaft, a stated warranty term or a stated EPA certification.
How to match an engine to the machine
Shaft diameter and keyway
The maXpeedingrods has a 3/4 in shaft with a 3/16 in keyway; the GENMAX and Aceup have a 1 in shaft with a 1/4 in keyway; the Serendicy has a 20mm shaft. The Serendicy listing notes the 20mm shaft is less common than the standard 3/4 in shaft and an adapter may be required. Measure the old shaft and match the diameter and keyway before ordering.
Horsepower and displacement
The engines here run from 7HP to 18HP, with displacements of 212cc, 420cc and 459cc. The GENMAX states a max torque of 18.1 ft.-lb at 2500 RPM. The Serendicy delivers 7.5 HP at 3600 RPM. Match the power to the machine manual, not to the biggest number on the shelf.
Electric start or recoil
The maXpeedingrods, GENMAX and Aceup have electric start and recoil start, per the listings. The Serendicy has recoil and electric start with a starter required, per the listing. The maXpeedingrods battery is not included, per the listing. Check what the machine already has before ordering.
Fuel tank and oil
The maXpeedingrods has a 3.6L fuel tank and a 0.6L oil capacity; the GENMAX has a 1.59-gallon fuel tank; the Serendicy has a 3.6L fuel tank; the Aceup has a 1.7 gallon fuel tank. The GENMAX needs oil before first use, per the listing. The maXpeedingrods has a low oil sensor that shuts the engine down when oil runs low, per the listing.
Safety
Check the oil before starting: the GENMAX needs oil before first use, per the listing. The maXpeedingrods low oil sensor shuts the engine down when oil reaches a level that is too low for safe operation, per the listing. Refuel with the engine off and cool, and run a gas engine outdoors only.
FAQ: mowing large lots
Can I put a horizontal shaft engine on a mower?
The maXpeedingrods listing names lawn mowers among its uses, per the listing. Match the shaft orientation, diameter and keyway to the machine before ordering.
What shaft size do these engines have?
The maXpeedingrods has a 3/4 in shaft, the GENMAX and Aceup have a 1 in shaft, and the Serendicy has a 20mm shaft, per the listings.
Do these engines have electric start?
The maXpeedingrods, GENMAX and Aceup have electric start and recoil start, per the listings. The Serendicy has recoil and electric start with a starter required, per the listing.
What warranty do these engines state?
The GENMAX states a 2-year limited service plan and the Aceup states a 1-year limited warranty. The maXpeedingrods and Serendicy state no warranty term.
Are these engines EPA certified?
The maXpeedingrods is EPA certified and the Aceup is EPA compliant, per the listings. The GENMAX and Serendicy state no EPA certification.




