How to Use Gas Can Spout Without Spills
Fit the spout and vent cap to the can, pour with the spout in the tank neck, and cap it tight to help stop spills.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
FOANRIY Gas Can Spout Kit, 3 Kits, 8.1 in Spout9.7/10View on Amazon - 2
Zoolowua Gas Can Spout Kit, 2 Kits, 8.1 in Spout9.6/10View on Amazon - 3
Yamataka Gas Can Spout Kit, 6 Kits, 8.1 in Spout9.6/10View on Amazon - 4
Yamataka Gas Can Spout Kit, 3 Kits, 8.1 in Spout9.6/10View on Amazon
To use a gas can spout, fit the spout and the vent cap to the can, tip the can so the spout sits inside the tank neck, and pour until the tank is nearly full. A spout that fits the can mouth helps keep fuel off the mower, the ground and the can, and a tight cap after fueling helps keep fuel from spilling in storage. This guide shows how to use gas can spout on a mower fuel can, from measuring the mouth to capping the spout after the pour.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

FOANRIY Gas Can Spout Kit, 3 Kits, 8.1 in Spout
Yellow 3-kit set of HDPE gas can spouts with an 8.1 in spout, thick rubber gaskets and 2 kinds of vent caps.
The FOANRIY kit handles the pour for a mower fuel can: a yellow HDPE spout, 8.1 in long, with thick rubber gaskets, a threaded cap and 2 kinds of vent caps. The maker lists it for most 1/2, 5 and 10 gallon cans with a mouth from 1.7 to 1.82 in, and the box holds 3 kits with 6 screw collar caps, 3 spouts and 3 nozzle caps.
Pros
- Spout is 8.1 in long
- One-piece hoses bend without breaking
- Thick rubber gaskets help stop leaks when refueling
- Includes 2 kinds of vent caps, a spout cover and base caps
Cons
- Fits only mouths from 1.7 to 1.82 in, so measure first
- Vent cap A needs drilling on a can with no vent
- Spout length is fixed at 8.1 in
- Warranty term is not stated

Zoolowua Gas Can Spout Kit, 2 Kits, 8.1 in Spout
White 2-kit set of HDPE gas can spouts with an 8.1 in spout, thickened rubber gaskets and 2 kinds of vent caps.
The Zoolowua kit handles the pour for a mower fuel can: a white HDPE spout, 8.1 in long, with thickened rubber gaskets and a threaded cap. The maker lists it for most 1/2, 5, 6 and 10 gallon cans with a mouth from 1.7 to 1.82 in, and the box holds 2 kits with 4 screw collar caps, 2 spouts and 2 nozzle caps.
Pros
- Listed for 1/2, 5, 6 and 10 gallon cans
- 8.1 in spout bends for use
- Gaskets are installed and ready to use
- Threaded cap has a rubber sealing gasket inside
Cons
- Only 2 kits in the box, so more cans need another set
- Fits only mouths from 1.7 to 1.82 in, so measure first
- Vent cap A needs drilling on a can with no vent
- Warranty term is not stated

Yamataka Gas Can Spout Kit, 6 Kits, 8.1 in Spout
6-kit set of HDPE gas can spouts with an 8.1 in spout, pre-installed seals and 2 kinds of vent caps.
The Yamataka 6-kit set handles the pour for mower fuel cans: HDPE spouts, 8.1 in long, with pre-installed seals and a threaded cap. The maker lists them for most 1/2, 5 and 10 gallon cans with a mouth from 1.7 to 1.82 in, and the box holds 6 kits with 12 screw collar caps, 6 spouts and 6 nozzle caps.
Pros
- 6 kits in the box for several cans
- Seals are pre-installed and ready to use
- 8.1 in spout bends without breaking
- Includes 12 screw collar caps in coarse and fine thread
Cons
- Fits only mouths from 1.7 to 1.82 in, so measure first
- Vent cap A needs drilling on a can with no vent
- 6 kits is more than a can or two needs
- Spout length is fixed at 8.1 in

Yamataka Gas Can Spout Kit, 3 Kits, 8.1 in Spout
3-kit set of HDPE gas can spouts with an 8.1 in spout, pre-installed seals and 2 kinds of vent caps.
The Yamataka 3-kit set handles the pour for mower fuel cans: HDPE spouts, 8.1 in long, with pre-installed seals and a threaded cap. The maker lists them for most 1/2, 5 and 10 gallon cans with a mouth from 1.7 to 1.82 in, and the box holds 3 kits with 6 screw collar caps, 3 spouts and 3 nozzle caps.
Pros
- Seals are pre-installed and ready to use
- 8.1 in spout bends without breaking
- Includes 6 screw collar caps in coarse and fine thread
- Includes 2 kinds of vent caps and a drill bit
Cons
- Fits only mouths from 1.7 to 1.82 in, so measure first
- Vent cap A needs drilling on a can with no vent
- Only 3 kits in the box, so more cans need another set
- Spout length is fixed at 8.1 in
How to use gas can spout: fit the spout to the can
Start with the can on level ground and the cap off. Choose the screw collar cap that threads onto the can mouth, since each kit holds coarse thread and fine thread caps. Fit the spout tube and the collar cap to the can mouth. Open the vent before pouring: a can with a vent cap at the tail takes vent cap B, while a can with no vent takes vent cap A, and fitting that cap needs drilling.
Measure the can mouth before you buy
Measure the mouth of the can and compare it with the fit range of the spout. The kits here are listed to fit a mouth from 1.7 to 1.82 in. The kits are listed for 1/2, 5 and 10 gallon cans, and the Zoolowua kit is also listed for 6 gallon cans. If the mouth falls outside the fit range, the collar cap may not thread on, so measure before ordering.
Pour with the spout in the tank neck
Park the mower on level ground and take the tank cap off. Put the spout inside the tank neck and tip the can slowly, keeping the spout in the neck through the pour. Pour slowly and stop before the tank is full, then tip the can back upright before pulling the spout out.
Cap the spout after fueling
When the pour is done, tighten the threaded nozzle cap onto the spout. The cap has a rubber sealing gasket inside, and the maker describes the cap as stopping overflow when the tank is down or in transport. Wipe up any fuel on the can before storing it, and store the can upright with the cap tight.
Gas can spout kits for mower fuel cans
A spout that fits the can mouth handles the pour, and the kits below carry that spout with the caps, gaskets and vent caps for the job.
Safety
Refuel with the engine off and cool, and work away from open flame. Keep children and pets out of the work area while pouring, and wipe up any fuel that spills before starting the engine.
FAQ: mowing large lots
Can a gas can spout fit any gas can?
No. Measure the can mouth first: the kits here are listed to fit a mouth from 1.7 to 1.82 in, on 1/2, 5 and 10 gallon cans, and the Zoolowua kit is also listed for 6 gallon cans.
How to stop a gas can spout from leaking?
Fit the spout with the gaskets in place and tighten the threaded cap after use. The cap has a rubber sealing gasket inside.
What is the vent cap for on a gas can spout kit?
The vent cap lets air into the can while fuel pours out. Vent cap A is for a can with no vent, and fitting it needs drilling, while vent cap B replaces the vent cap on a can that has one.
How long is the spout on these kits?
The spout is 8.1 in long on all 4 kits in this guide.
Can a gas can spout be used for a mower?
Yes. Fit the spout and vent cap, and pour into the mower tank with the spout in the tank neck, with the engine off and cool. Cap the spout tight after fueling.




