Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Manual Sod Cutter Tool: How They Work

A manual sod cutter tool cuts square plugs or lines of sod by hand for patching bare spots and moving grass.

Manual Sod Cutter Tool: How They Work
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Colwelt Sod Plugger Tool Square 36 in Steel Dual PedalsColwelt Sod Plugger Tool Square 36 in Steel Dual Pedals9.6/10View on Amazon
  2. 2Keyfit Tools Sod Knife F2 Folding Sod Knife 3.5 in BladeKeyfit Tools Sod Knife F2 Folding Sod Knife 3.5 in Blade9.6/10View on Amazon

A bare patch in the middle of a lawn draws the eye every time you cross the yard. Grass around it stays green while the patch stays brown, and seed scattered on top often washes away before it takes hold. A manual sod cutter tool is a hand tool that cuts a piece of sod free so you can lift it out, move it to the bare spot, and press it into place. This guide shows how the tool works, what cuts it makes, and which of the two hand tools below fits each part of the job.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Colwelt Sod Plugger Tool Square 36 in Steel Dual Pedals

Colwelt Sod Plugger Tool Square 36 in Steel Dual Pedals

Colwelt9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

36 in steel sod plugger that cuts 3 by 3 in square plugs with dual pedals and a foot ejector.

Who it's for: owners patching bare spots with commercial-size plugs who want to work standing up.

Who should skip it: anyone lifting long strips of sod, or anyone who wants a stated warranty term before buying.

The Colwelt Sod Plugger Tool Square cuts a 3 in by 3 in square plug of sod, the same size as a typical commercial plug. Two anti-slip steel pedals help it cut into soil, and a foot ejector drops the plug out with a step, so hands stay out of the mud. The handle is 36 in long with a soft, non-slip grip and a T-grip top, and the tool weighs 4.0 lb. Thickened carbon steel with an anti-rust finish forms the body, and the sharp serrated bottom cuts through soil.

Pros

  • Cuts 3 by 3 in square plugs that match typical commercial plugs
  • Two anti-slip steel pedals for balance and easier soil penetration
  • Foot ejector drops the plug with a step, no bending over
  • 36 in handle lets you work from a standing position

Cons

  • Cuts one plug at a time, so a large bare patch takes many plugs
  • No warranty term is stated
  • Square plugs only, not long straight strips of sod
  • At 4.0 lb it is the heavier of the two tools here
Keyfit Tools Sod Knife F2 Folding Sod Knife 3.5 in Blade

Keyfit Tools Sod Knife F2 Folding Sod Knife 3.5 in Blade

Keyfit Tools9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Folding sod knife with a 3.5 in curved 440 stainless blade and a sharpener.

Who it's for: owners cutting small sod pieces or trimming edges by hand who want a folding blade that stores small.

Who should skip it: anyone cutting long straight runs of sod, or anyone who wants a long handle and foot pedals.

The Keyfit Tools Sod Knife F2 is a folding knife with a 3.5 in curved blade of 440 stainless steel, heat treated and tempered. The handle is Garolite-11 in high visibility orange, and a sharpener comes with it. The blade is 1/8 in thick and the overall length is 8.5 in. The maker lists the weight as 160g.

Pros

  • 3.5 in curved 440 stainless blade, heat treated and tempered
  • Folding blade for compact storage
  • Sharpener included with the knife
  • Garolite-11 handle in high visibility orange

Cons

  • No warranty term is stated
  • 3.5 in blade suits short cuts, not long straight runs
  • No long handle or pedals, so each cut is made by hand
  • Folding design means unfolding the blade before each use

How a manual sod cutter tool works

The tool cuts down through the grass and the root layer, so the piece lifts out with its roots. A plugger cuts a square plug, lifts it out, and drops it with a foot ejector. A knife cuts a line through the sod so the piece can be peeled back or lifted free. Both types work by hand and suit small patches rather than a whole lawn. The plugger matches the size of a typical commercial plug, while the knife follows any line you cut.

Two kinds of manual sod cutters

The plugger is a standing tool. The Colwelt plugger (on Amazon) below stands 36 in tall, with dual pedals and a foot ejector, and it cuts a square plug for transplanting. The knife is a hand tool for close work. The Keyfit knife below folds shut, carries a curved blade, and cuts lines for edging and trimming sod. Pick the plugger when the job is moving plugs between lawns, and pick the knife when the job is cutting sod to shape by hand. For more manual picks, see the best sod cutter tool for lawn roundup.

How to cut and move a sod plug

Mark the patch, then cut the plug from a healthy stretch of lawn. Step on the pedals to drive the plugger into the soil, wiggle it free, and press the foot ejector to drop the plug. Set the plug into the bare spot and press it level with the lawn around it. For edges and odd shapes, use the knife to cut the sod to shape before lifting. Keep the plugs shaded and damp until they are set, and water the patched area so the roots meet the soil.

The gear for cutting sod plugs

Cutting the plug to the size of a typical commercial plug is the step that needs the gear below: the plugger cuts the square, and the knife trims it to shape.

FAQ: mowing large lots

What does a manual sod cutter tool cut?

It cuts a piece of sod free from the lawn, roots and all, so the piece can be lifted and moved. The Colwelt plugger cuts a square plug, and the Keyfit knife cuts a line through sod for shaping and trimming.

What size plug does the Colwelt plugger cut?

It cuts a 3 in by 3 in square plug, the same size as a typical commercial plug. The maker says the square shape likely captures more of the root system than a round plug.

How tall is the Colwelt plugger?

It stands 36 in tall, with a long handle that lets you work from a standing position. The soft, non-slip grip and T-grip handle suit extended use, and the tool weighs 4.0 lb.

What blade does the Keyfit sod knife use?

It uses a 3.5 in curved blade of 440 stainless steel, heat treated and tempered, with a thickness of 1/8 in. The blade folds into a Garolite-11 handle, and a sharpener comes with the knife. Overall length is 8.5 in.

Which tool cuts sod to shape?

The Keyfit knife. Its 3.5 in curved blade cuts lines through sod for edging and trimming, and it folds for storage. The Colwelt plugger cuts square plugs for transplanting, not long straight strips.

More mowing guides

More buying guides

Tillers and Cultivators ·

Best Garden Fork for Turning Compost (2026)

Five garden forks for turning compost, from a heavy 5-tine broadfork to a light 4-tine spading fork, compared by tine count, length, weight and…