Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Power Rake Parts: Tines, Belts and Replacement Pieces

Tines and springs wear out on a power rake, and mounting hardware works loose, so matching the part number is the step that keeps a replacement fitting the machine.

Power Rake Parts: Tines, Belts and Replacement Pieces
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EGO Power+ Parts 3800111001 Blower Strap for EGO LB5300EGO Power+ Parts 3800111001 Blower Strap for EGO LB5300View on Amazon
  2. 2EGO Power+ Parts 3800121001 Harness Straps for LB6000EGO Power+ Parts 3800121001 Harness Straps for LB6000View on Amazon
  3. 3Husqvarna 599662604 Genuine OEM Part US Power Supply forHusqvarna 599662604 Genuine OEM Part US Power Supply forView on Amazon

When the tines on a power rake bend, snap or wear short, the machine stops pulling thatch and starts skipping over it. Power rake parts are the replacement pieces that bring the bite back: tines, springs, blades and the bolts and mounting hardware that hold them on the machine. This guide explains each part, how to match it to the machine, and how to swap the common ones at home.

Other machines to compare

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Power rake parts: what wears out on the job

Part What it does Common packs
Tines Comb through the lawn and pull up thatch 6 to 52
Springs Hold tension on the blade during operation 4
Mounting bolts and nuts Hold bolt-mount tines in place Not stated

Tines do the work, so check them first when the pull turns uneven. A bent tine skips thatch and a broken tine leaves a strip untouched, so a fresh set of tines is the first thing to check for an uneven pass. Springs hold tension on the blade during operation. Bolts and nuts look minor until a bolt works loose, so check them when the tines come off.

Match the part number before you order

A power rake part fits when its part number matches the machine, not when it looks close. GreenWorks dethatcher tines carry part number 29272 and fit the GreenWorks 27022 and 2500600G 10 Amp 14 inch corded dethatcher. Maxpower power rake springs carry part number 330105 and fit the Maxpower 16 inch dethatching mower blade and the Arnold 490-100-0111 16 inch dethatching replacement mower blade. Stens rake teeth, part number 373-173, replace Bluebird 5001 or 539005001 or 539005187 and fit Bluebird seeder P18 or PR18 or PR22. Pulems spring (on Amazon) tines, part number 43783, fit Agri-Fab 45-0294 or 45-02941 or 45-02942-131 or 45-0295 or 45-02951 dethatchers in 40 inch and 48 inch widths.

When the part number is missing from the old part, measure the tine: width, thickness, length and the mounting hole. A tine that is close but not exact can sit crooked in the slot or work loose during a pass. Trust the fit list for the machine over a generic size chart.

Tines: sizes, shapes and what fits

Replacement tines come as rock rake tines, scarifier rake tines and spring tines, and the shape follows the job. Blulu rock rake tines (on Amazon) are heat-treated steel, about 1 inch wide and 5/16 inch thick, about 1-3/8 inches back from the edge of the tine, about 27 inches long, and stand about 15-1/4 inches tall when mounted, with about a 3/8 inch mounting hole. The pack holds 6 tines and mounts with a bolt through the hole.

Stens rake teeth are straight teeth, 4 inches long, 1 inch wide and 0.122 inch thick, with a 17/32 inch mount hole on the end, sold in a pack of 52 teeth. Pulems spring tines measure 4.5 inches wide, 2 inches high and 8.5 inches long and come in a pack of 8 tines. Imqnzdf dethatcher tines (on Amazon) measure 0.78 inch or 20mm in width and 1.77 inches or 45mm in length and come in a pack of 36 tines. HandyTek dethatcher tines (on Amazon) come in a pack of 18 tines for the GreenWorks 27022 dethatcher.

The best dethatcher roundup shows the machines these tines belong to, and lawn aerator vs dethatcher explains where a dethatcher fits in lawn care.

Springs: the small part that holds tension

Power rake springs hold tension on the blade assembly during operation. Feekoon replacement springs (on Amazon) are made of SWPB material, measure 3.93 inches long, 1.18 inches wide and 0.98 inch high, and come in a pack of 4 springs. Szuenh 330105 springs are spring steel in a gold finish and come in a pack of 4 springs. Both fit the Maxpower 330105 pattern, so the part number is the check that matters, not the color of the finish.

Change tines at home

Most tine swaps need hand tools and a clear bench. For the GreenWorks 27022 cartridge, the swap needs an 8mm socket, a Phillips screwdriver, a flat head screwdriver and a small mallet, with screws in M5 X 22 or M5 X 25 size. Remove the screws, tap the cartridge gently with the mallet, pry it open with the flat head screwdriver until the pin shows, push the pin out, pull the old tine, set the new tine in, replace the cartridge and tap it gently with the mallet.

For a bolt-mount rock rake tine, the order is different: make sure the machine is turned off and disconnected, remove the bolts and nuts that hold the tines, pull the tine straight out of the slot, set the new tine in the correct orientation, reinsert the bolts and fasten the nuts until the tine is held firm, tight but not over-tight. Wear eye protection and gloves, keep children and pets out of the work area, and check each bolt again after the first pass.

A push lawn sweeper vs power rake comparison shows where a power rake earns its keep, and aluminum vs steel landscape rake covers the hand-rake side of the job.

FAQ: mowing large lots

Which power rake tines fit a given machine?

Match the part number on the old part or in the manual with the number in the listing. GreenWorks 27022 takes 29272 tines, Maxpower takes 330105 springs, and Agri-Fab dethatchers take 43783 spring tines.

How many tines come in a pack?

Pack sizes in the listings run from a pack of 6 tines to a pack of 52 tines: Blulu rock rake tines in a pack of 6 tines, HandyTek tines in a pack of 18 tines, Imqnzdf tines in a pack of 36 tines, and Stens teeth in a pack of 52 teeth.

What size are replacement power rake springs?

Feekoon replacement springs measure 3.93 inches long, 1.18 inches wide and 0.98 inch high and come in a pack of 4 springs. They fit the Maxpower 330105 pattern and the Arnold 490-100-0111 16 inch dethatching replacement mower blade. Szuenh 330105 springs come in a pack of 4 springs in a gold finish.

Can dethatcher tines be replaced at home?

Yes, with hand tools. The GreenWorks 27022 cartridge opens with an 8mm socket, a Phillips screwdriver, a flat head screwdriver and a small mallet, and the screws are M5 X 22 or M5 X 25 size. Bolt-mount tines come off the same way they go on, in the correct orientation.

Do power rake tines fit every brand?

No. Tines are made to a part number and a machine. Stens 373-173 teeth fit Bluebird seeder P18 or PR18 or PR22, and Pulems 43783 tines fit Agri-Fab 40 inch and 48 inch dethatchers. Check the fit list before ordering.

More mowing guides

More maintenance routines live in the mower maintenance hub.

More buying guides