Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Rubber vs Metal Snow Pusher Edge: Which One Should You Buy?

A guide to rubber and metal snow pusher edges, using the rubber, polyurethane and UHMW listings here and stating plainly where a metal listing is missing.

Rubber vs Metal Snow Pusher Edge: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Trekassy Wheel Chock Tie-Down Kit with Rubber BlocksTrekassy Wheel Chock Tie-Down Kit with Rubber Blocks9.6/10View on Amazon
  2. 2MightyRugged 07200839 Deck Belt for Ariens Edge 52 Zero TurnMightyRugged 07200839 Deck Belt for Ariens Edge 52 Zero Turn9.7/10View on Amazon
  3. 3LikeLion 703371 21 in Stainless Mulching Blade with TungstenLikeLion 703371 21 in Stainless Mulching Blade with Tungsten9.6/10View on Amazon
  4. 4Snow Plow Rubber Cutting Edge 84" x 6" x 1" Plow Cutting EdgeSnow Plow Rubber Cutting Edge 84" x 6" x 1" Plow Cutting EdgeView on Amazon
  5. 5Snow Plow Rubber Cutting Edge 96" x 8" x 1" Polw Cutting EdgeSnow Plow Rubber Cutting Edge 96" x 8" x 1" Polw Cutting EdgeView on Amazon
  6. 6Snow Plow Rubber Cutting Edge 96" x 8" x 0.39" Plow CuttingSnow Plow Rubber Cutting Edge 96" x 8" x 0.39" Plow CuttingView on Amazon
  7. 7Simond StoreSimond StoreView on Amazon
  8. 8Heavy Duty Snow Pusher Rubber 1-1/2" thick x 10" wide x 14ft.Heavy Duty Snow Pusher Rubber 1-1/2" thick x 10" wide x 14ft.View on Amazon
  9. 9Heavy Duty Snow Pusher Rubber 1-1/2" thick x 10" wide x 10Heavy Duty Snow Pusher Rubber 1-1/2" thick x 10" wide x 10View on Amazon

A driveway after a storm needs an edge that clears snow without chewing up the surface underneath, and the edge material sets that trade-off. In rubber vs metal snow pusher edge, the listings here cover a rubber edge and several poly edges, but no metal edge listing is included, so metal edge specs are Not stated in this guide. What follows compares the listed edges on stated size, surface claims and fit, so the choice stays tied to what the listings state.

Other machines to compare

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

rubber vs metal snow pusher edge: the short answer

Pick a rubber edge if the driveway surface matters most and the listed rubber edge fits the pusher width, since the rubber listing states a flexible edge that glides across concrete, asphalt, pavers and cobblestone while reducing scraping marks and noise. Pick a poly edge if a stated size and a stated warranty matter, since the polyurethane listing states a 2 years warranty and the UHMW listings state driveway protection in their bullets. Do not pick a metal edge from this guide, since no metal edge listing is included here and no metal edge size, weight or price is stated. For pusher options beyond edges, see our best snow pusher guide.

The rubber edge in the listings

The SIMOND STORE rubber cutting edge is listed at 84 inches by 6 inches by 1 inch thick, which makes it the widest edge in the listings here. The listing states a flexible rubber edge that glides smoothly across concrete, asphalt, pavers, cobblestone and other surfaces, while reducing scraping marks and noise for controlled operation. The listing also states corrosion and chemical resistance, strength and flexibility in freezing temperatures and heavy snowfall, and a heavy duty build for repeated seasonal use. Installation is stated as easy DIY work: the edge can be measured, cut, drilled and installed using common shop tools, and fastened with an existing setup. The listing names ATV, UTV, tractor attachment, loader and skid steer setups as uses, so check the pusher width against the stated 84 inch length before buying. For a tractor bucket edge, see our best rubber snow edge for tractor bucket guide.

The poly edges in the listings

The wriboard polyurethane edge is listed at 60 inches long, 4 inches wide and 3/4 inch thick. The listing states a polyurethane edge that is much softer than metals, removing snow and thin ice while protecting asphalt driveways, concrete sidewalks and fine paving stones, with no damage left after cleaning as stated. The listing states high strength and elasticity, withstanding repeated impacts and bending, and easy installation using included bolts or screws, or bolts already at home, directly covering existing metal blades. The listing states a 2 years warranty, which is the only stated warranty term among the listings here. The listing names UTV snowplows, tractor buckets, forklift blades and ATV snowplows as fits, so check the pusher width against the stated 60 inch length.

The Generic UHMW poly edge listed with a 72 inch title length states UHMW protection for concrete, asphalt, cobblestone and pavers, with toughness and impact resistance in sub-zero temperatures as stated. The listing states a quieter and smoother experience than steel as a maker claim, and easy cutting, drilling and installation with common shop tools, trimming to an exact size as stated. The listing states uses for snow blowers, ATV and UTV plows, truck plows, skid steers, snow pushers and tractor buckets. Figures in this listing need checking before buying: the title and size field state 72 inches long, while the spec table states 60.0 inches long, and the title states 3/4 inch thick, while the spec table states 1.0 inches deep. Trust the title over the spec table for length and thickness, and confirm the length with the seller before buying.

The Generic UHMW poly edge listed at 60 inches long states the same UHMW protection claims for concrete, asphalt, cobblestone and pavers, with toughness and impact resistance in sub-zero temperatures as stated. The listing states a quieter and smoother experience than steel as a maker claim, and easy cutting, drilling and installation with common shop tools, trimming to an exact size as stated. The listing states a weight of 15.0 pounds, while the 72 inch title listing states a weight of 5.0 pounds, so do not copy a weight figure between the UHMW listings. Figures in this listing need checking before buying: the title states 3 inches wide, while the spec table states 4.0 inches wide, and the title states 3/4 inch thick, while the spec table states 1.0 inches deep. Trust the title over the spec table for width and thickness, and confirm the width with the seller before buying.

What is missing: a metal edge listing

No metal edge listing is included in the listings here, so this guide states no metal edge size, thickness, weight, warranty or surface effect. Maker claims that mention steel appear only inside poly listings, as comparisons to steel, and those claims are reported here as maker claims, not as steel facts. A buyer who wants a metal edge should check a metal edge listing on its own stated size and thickness, rather than assuming metal properties from a poly listing that merely names steel. The related metal edge pusher guide is linked in the related guides section below, for a metal edge product on its own listing.

Sizing and fit

Measure the pusher blade before ordering, since the listed lengths differ across the listings here. The rubber listing states 84 inches long, the polyurethane listing states 60 inches long, and the UHMW listings state 72 inches and 60 inches long in their titles. Width and thickness differ as well: the rubber listing states 6 inches wide and 1 inch thick, the polyurethane listing states 4 inches wide and 3/4 inch thick, and the UHMW titles state 4 inches wide and 3 inches wide, each at 3/4 inch thick. Check the mounting holes and the existing blade profile against the new edge, since the listings state installation with common shop tools and existing hardware, but state no hole spacing figure. Confirm any conflicting figure with the seller before buying, especially the UHMW length, width and thickness figures flagged above.

Safety

Clear sticks, stones and other debris from the path before pushing snow, and keep bystanders away from the work area. Wear eye and hearing protection and sturdy shoes when cutting, drilling or mounting an edge with shop tools. Follow the equipment manual for mounting and for any slope or surface limits, since the listings here state no slope rating. See our Safety Disclaimer.

FAQ: mowing large lots

Is a rubber edge better for a paved driveway?

The rubber listing states a flexible edge that glides across concrete, asphalt, pavers and cobblestone while reducing scraping marks and noise. That surface claim is stated for the rubber listing only, so do not copy it to a poly or metal listing.

What size edge should I buy?

Match the stated length, width and thickness to the pusher blade, and confirm any conflicting figure with the seller. The listings here state lengths of 84 inches, 60 inches and 72 inches in titles, with widths of 6 inches, 4 inches and 3 inches.

Does any listing here state a warranty?

Yes, for the polyurethane listing only, at 2 years as stated. The other listings here state no warranty term, so do not assume warranty coverage for those edges.

Can I cut a poly edge to fit?

The UHMW listings state trimming to an exact size using common shop tools, and the polyurethane listing states easy installation covering existing metal blades. The rubber listing states measuring, cutting and drilling using common shop tools.

Where is the metal edge in this guide?

No metal edge listing is included here, so metal edge specs are Not stated in this guide. Check a metal edge listing separately for its stated size, thickness and weight before choosing a metal edge.

More mowing guides

More buying guides