Soft Wash Set Up for a Pressure Washer
A soft wash set up pairs a low-pressure nozzle or injector with your pressure washer so cleaning solution reaches siding and high walls from the ground.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
X-Jet M5#13 Kit 4-4.5 GPM Adjustable External Injection Nozzle9.7/10View on Amazon - 2
Jariko JRod 4-Way Soft Wash Nozzle Kit for 2-4 GPM Washers9.6/10View on Amazon
On a rural property, siding, fences, outbuildings and high walls collect grime, algae and dust through the seasons, and a standard pressure jet can be too harsh for painted wood, vinyl and other delicate surfaces. A soft wash set up answers that problem by applying cleaning solution at low pressure through a nozzle or injector that fits your pressure washer, then rinsing it away, so the solution does the cleaning instead of force.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

X-Jet M5#13 Kit 4-4.5 GPM Adjustable External Injection Nozzle
Adjustable long-range external injection nozzle for 4 to 4.5 GPM washers, with a 15 ft hose and a 15-color coded proportioner set.
Who it's for: owners who want to apply solution and rinse high walls from the ground, and who already run a washer rated 4 to 4.5 GPM.
Who should skip it: owners of smaller washers outside that flow range, or anyone who wants a simple tip swap at the wand instead of a hose and proportioner set.
The X-Jet M5#13 Kit is an adjustable external injection nozzle for washers rated 4 to 4.5 GPM and 2000 to 4500 PSI, with a variable spray pattern from 0 to 60 degrees. It comes with a 15-color coded proportioner set and a 15 ft hose assembly with an inline shut off valve and a tank screen filter. The kit draws cleaning solution from a pail, so the solution bypasses the washer, spray gun, lance and quick connects. It weighs 2.8 pounds and measures 40.0 x 2.0 x 4.0 inches. The maker states it reaches heights of up to 40 ft or more from the ground, depending on the machine.
Pros
- Variable spray pattern from 0 to 60 degrees
- 15-color coded proportioners and a 15 ft hose with an inline shut off valve
- Reaches up to 40 ft or more from the ground, per the maker
- External injection keeps solution out of the pressure washer
Cons
- Fits washers rated 4 to 4.5 GPM only
- No warranty term is stated on the listing
- You supply the pail the hose draws from
- At 40.0 inches long and 2.8 pounds, it is the bulkier kit here

Jariko JRod 4-Way Soft Wash Nozzle Kit for 2-4 GPM Washers
Four-way stainless steel nozzle kit for 2 to 4 GPM washers, with 1/4-inch quick-connect fittings and four spray modes.
Who it's for: owners who want to change spray patterns at the wand for close work on courtyards, vehicles and high walls.
Who should skip it: owners who need to feed solution from a pail or wash from a long distance, since this kit has no hose, proportioner set or stated reach.
The Jariko JRod Nozzle Kit is a four-way set of stainless steel tips for washers rated 2 to 4 GPM, with standard 1/4-inch quick-connect fittings. The 0010 and 0040 nozzles give a 0-degree direct jet, and the 2540 and 2510 nozzles give a 25-degree fan for delicate cleaning. Each nozzle comes with pre-applied PTFE tape, and the kit measures 2.3 x 3.1 x 0.7 inches. The maker lists welded seams for wear resistance and states the tips resist chemicals.
Pros
- Fits washers rated 2 to 4 GPM, a wider flow range than the X-Jet kit
- Four spray modes from 0 to 25 degrees
- Stainless steel tips with welded seams
- Pre-applied PTFE tape helps prevent leaks and speeds up setup
Cons
- No hose, proportioner set or shut-off valve in the kit
- No reach figure is stated for the kit
- No warranty term is stated on the listing
- Fits washers up to 4 GPM only, so larger machines need another nozzle
Soft wash set up: how the parts work together
A soft wash set up moves water from the washer, shapes the spray, and feeds cleaning solution to the surface. The washer supplies water and pressure. A nozzle kit shapes the spray into a wide fan for delicate surfaces or a direct jet for tough spots. An injector draws solution from a pail into the stream, and a valve lets you switch between soaping and rinsing.
| Part | Job | What to check |
|---|---|---|
| Washer | Supplies water and pressure | Stated flow and pressure ratings |
| Nozzle kit | Shapes the spray pattern | Flow range and fitting size |
| Injector and hose | Feeds solution from a pail | Hose length and shut-off valve |
| Proportioner set | Sets the solution mix | Number of proportioners in the kit |
The pressure washer nozzle chart explains tip sizes and spray angles in more detail.
Soft wash set up: the gear for this job
The J-Rod nozzle kit changes the spray pattern at the wand for close work, and the X-Jet injector applies solution and rinses from the ground at range.
Step 1: match the nozzle to your washer
Start with the flow and pressure your washer is rated for, then pick a nozzle kit that lists the same range. The Jariko J-Rod kit fits washers rated 2 to 4 GPM, while the X-Jet M5 (on Amazon)#13 kit fits washers rated 4 to 4.5 GPM and 2000 to 4500 PSI. Check the ratings on your washer before you order.
Step 2: connect the kit
Connect the nozzle kit to the wand with the fitting the maker lists. The Jariko kit fits (on Amazon) standard 1/4-inch quick-connect fittings, and each nozzle comes with pre-applied PTFE tape to prevent leaks and improve the fit. The X-Jet kit connects through its 15 ft hose assembly, which has an inline shut off valve and a tank screen filter, and it draws cleaning solution from a pail rather than sending solution through the washer.
Step 3: choose the spray pattern
Pick the pattern for the surface in front of you. The Jariko kit gives four spray modes: the 0010 and 0040 nozzles give a 0-degree direct jet for tough spots, and the 2540 and 2510 nozzles give a 25-degree fan for delicate cleaning. The X-Jet M5 adjusts from 0 to 60 degrees, so you can widen the fan for a wall or narrow it for a stubborn patch without changing tips. Change the tip or turn the adjustment to change the pattern.
Step 4: apply solution, then rinse
With the X-Jet kit, pick a proportioner from the 15-color coded set, set the hose in the pail, and turn the inline shut off valve to switch between soaping and rinsing. The maker states the kit reaches heights of up to 40 ft or more from the ground, depending on the machine, so high walls and upper siding can be washed without a ladder or lift. With the J-Rod kit, swap tips at the wand to move between the direct jet and the wider fan. Keep the spray moving across the surface.
Safety
Wear eye and hearing protection and sturdy shoes, and keep children, pets and bystanders away from the work area. Never point a pressure washer nozzle at people or animals. Run gas units outdoors only, and refuel only with the engine off and cool. Follow the manual for your washer and for each nozzle kit before you start.
FAQ: mowing large lots
What GPM washer does a soft wash set up need?
It depends on the nozzle kit. The Jariko J-Rod kit fits washers rated 2 to 4 GPM, and the X-Jet M5#13 kit fits washers rated 4 to 4.5 GPM and 2000 to 4500 PSI. Match the kit to the ratings on your washer.
What is the difference between a J-Rod nozzle set and the X-Jet M5?
The J-Rod set is four stainless steel tips that swap at the wand to change the spray pattern. The X-Jet M5 is an adjustable external injection nozzle with a 15 ft hose, a 15-color coded proportioner set and a shut-off valve, and it draws solution from a pail so the solution never passes through the washer.
How far can you wash from the ground with a soft wash set up?
The maker states the X-Jet M5 reaches heights of up to 40 ft or more from the ground, depending on the machine, with no need for ladders or lifts. The higher the GPM, the higher the reach the maker expects.
Do soft wash nozzles fit a standard quick-connect fitting?
The Jariko J-Rod kit fits standard 1/4-inch quick-connect fittings, and each nozzle comes with pre-applied PTFE tape.
How do you switch between soaping and rinsing?
On the X-Jet kit, turn the inline shut off valve on the hose assembly to switch between soaping and rinsing. The J-Rod kit has no hose or injector and feeds no solution, so changing its tips only changes the spray pattern.
More mowing guides
- Best Pressure Washer Nozzle (2026)
- Pressure Washer Nozzle Chart: Tip Sizes Explained
- Best Adjustable Pressure Washer Nozzle (2026): 5 Picks Compared
- Best Foam Cannon for Pressure Washer (2026)
For a washer to pair with this set up, see the best pressure washer for home use picks.




