Tractor Tire Chain Repair Links Guide
A plain guide to tractor tire chain repair links: find the break, match the link to your chain, close it and check the repair before you drive.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Hanezo 18-Piece Chain Repair Lap Links9.6/10View on Amazon - 2
CREVIV 34-Piece Quick Link Kit, 6 Sizes9.6/10View on Amazon - 3
QWORK G80 Hammerlock Coupling Link, 5/16 in9.6/10View on Amazon
When a tractor tire chain breaks, a single link can be the fix. Tractor tire chain repair links join both ends of a broken chain so it can go back to work: a lap link closes over the ends with a hammer, a quick link screws shut, and a hammerlock link pins the ends together. This guide shows how to find the break, match a link to your chain, close it and check the repair.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
| # | Product | Acre Score | Buy |
|---|---|---|---|
| 1 | Hanezo 18-Piece Chain Repair Lap Links | 9.6/10 | Buy on Amazon |
| 2 | CREVIV 34-Piece Quick Link Kit, 6 Sizes | 9.6/10 | Buy on Amazon |
| 3 | QWORK G80 Hammerlock Coupling Link, 5/16 in | 9.6/10 | Buy on Amazon |

Hanezo 18-Piece Chain Repair Lap Links
18 zinc-plated lap links that join chain ends with a hammer tap, sized 6 mm thick with a 33 mm inner length.
Who it's for: owners who want a plain, purpose-built repair link for a tire chain and have a hammer on hand.
Who should skip it: anyone who needs a stated load rating, or whose chain needs a different link size.
The Hanezo lap link is the most direct match for this job: an open link you slip over both chain ends and tap closed with a hammer. The maker lists it as 6 mm thick with an inner length of 33 mm, and the pack holds 18 links. The zinc-plated finish is listed as rust resistant indoors and out.
Pros
- Purpose-built lap link for joining chain ends
- 18 links in the pack, enough for more than one repair
- Zinc-plated metal resists rust indoors and out
- Closes with a hammer
Cons
- No load rating is stated on the listing
- Needs a hammer to close, so it is not a tool-free fix
- One size only, so it has to match your chain
- Warranty term is not stated on the listing

CREVIV 34-Piece Quick Link Kit, 6 Sizes
34 zinc-plated quick links in 6 sizes, from 1-3/8 in to 3 in, with load ratings from 220 to 1600 lbs, in a compartment case.
Who it's for: owners who keep several chains or want one kit that covers more than one chain size.
Who should skip it: anyone who only needs one link and does not want a full kit.
The CREVIV kit covers the sizing problem: 34 quick links in 6 sizes, from 1-3/8 in to 3 in, with load ratings from 220 to 1600 lbs by size. The maker lists carbon steel with a zinc-plated finish, and the links come in a clear compartment case. The count is 12 small, 8 medium, 6 standard, 4 large and 4 extra-large links.
Pros
- 6 sizes in one kit, from 1-3/8 in to 3 in
- Load ratings stated from 220 to 1600 lbs by size
- Clear compartment case keeps sizes sorted
- 34 links cover more than one repair or chain
Cons
- Only 4 extra-large links in the 34-piece kit
- Smallest size is rated at 220 lbs, so match the size to the load
- Warranty term is not stated on the listing
- Most of the 34 links will not fit a single chain size

QWORK G80 Hammerlock Coupling Link, 5/16 in
4-pack of Grade 80 alloy steel hammerlock coupling links, 5/16 in, with a 4400 lbs load limit and an anti-drop pin.
Who it's for: owners who want a stated 4400 lbs load limit and a locking pin for a heavy chain.
Who should skip it: anyone whose chain needs a different size, or who wants a link made for tire chains.
The QWORK hammerlock lists a stated max working load of 4400 lbs in a 5/16 in size, for lifting chain slings. The maker lists Grade 80 drop-forged alloy steel with an anti-drop pin and buckle that locks tightly, and the pack holds 4 links. The listing describes it for assembling and reassembling lifting chain slings, so check the fit on a tire chain before you buy.
Pros
- Stated max working load of 4400 lbs
- Grade 80 drop-forged alloy steel construction
- Anti-drop pin locks the link tightly
- Red finish makes the link easy to spot on the chain
Cons
- Made for lifting chain slings, so check the fit on a tire chain
- Only 4 links in the pack
- Only one size is offered, at 5/16 in
- No inner length is stated on the listing
Tractor tire chain repair links: what they are and how to use them
A repair link is a short piece of chain hardware made to reconnect a chain that has come apart. Lap links are open links that close over the chain ends. Quick links have a threaded sleeve that screws shut. Hammerlock links join with a pin and a locking buckle. Each type is made to join chain ends, but the fit for a tire chain must be checked for each one, so pick the type that fits your chain and the tools on hand.
| Link type | How it closes | Watch for |
|---|---|---|
| Lap link | Hammer tap closes the open link | Match the inner length to your chain |
| Quick link | Threaded sleeve screws shut | Match the size to the load rating |
| Hammerlock link | Pin and locking buckle hold it shut | Check the fit on a tire chain first |
See the tire chains by tire size fitting chart for help matching a chain to your tire.
Find the broken link
Take the chain off the tire and lay it out flat where you can see the full length. Walk along it and look at each link where it meets the next one. A broken link may show a gap, a crack, or a link that has worn thin and pulled open. Mark the spot so you can find it again. Replace each broken link before the chain goes back on the tire.
Measure the chain before you buy
A repair link has to fit the chain it joins. Measure the wire thickness and inside length of a sound link on your chain, then compare those figures with the listing. A link that is too small will not close over the chain ends, and a link that is too large will sit loose on the chain. The Hanezo lap link (on Amazon) lists an inner length of 33 mm, the CREVIV kit (on Amazon) spans 1-3/8 in to 3 in, and the QWORK hammerlock (on Amazon) comes in 5/16 in. These are different size figures: the Hanezo figure is an inner length, the CREVIV figures are link lengths, and the QWORK figure is a chain size. Buy the size that matches your chain, not the size that looks close.
Close the link and check the repair
Fit the repair link through both ends of the broken chain and close it the way its type requires. A lap link closes with a hammer tap. A quick link screws shut. A hammerlock link closes when the pin seats and the buckle locks. Once the link is closed, pull the chain by hand and look for any gap at the joint. Put the chain back on the tire, drive slowly, then stop and look at the repair again before regular work.
The gear for tractor tire chain repair links
Each link below is a different way to join the chain ends: the lap link joins them with a hammer tap, the kit covers the sizing, and the hammerlock joins them with a pin.
Safety
Wear eye protection and work gloves when you hammer a link closed, and keep your hands clear of the joint. Work on flat ground with the tire chocked so it cannot roll. Check the repaired chain before driving, and look at the repair again after a short run.
FAQ: mowing large lots
Can a tractor tire chain be repaired with a lap link?
Yes. A lap link joins chain ends: slip it over both ends and tap it closed with a hammer. Match the inner length to your chain first.
What size repair link fits my tire chain?
Match the link to your chain. The Hanezo lap link has an inner length of 33 mm, the CREVIV kit covers sizes from 1-3/8 in to 3 in, and the QWORK hammerlock is 5/16 in. These figures measure different things, so compare each one against the matching figure on your chain and buy the size that matches.
How does a chain repair link close?
A lap link closes with a hammer tap, a quick link screws shut, and a hammerlock link locks when its pin seats. Pull the chain by hand after closing to check for a gap at the joint.
Can a quick link be used on a tractor tire chain?
It can work if the size fits the chain and the load rating suits the use. The CREVIV kit lists load ratings from 220 to 1600 lbs by size, so check the rating for the size you pick and check that the sleeve stays shut.
How can the repair be checked?
Pull the chain by hand and look for a gap at the joint, then check the link again after a short run. If the link has opened, replace it before regular work.
More mowing guides
- Tractor Tire Chain Parts: Replacement Guide for Winter Grip
- Best Tire Chains (2026): 5 Picks for Winter Traction
- Types of Tire Chains for Lawn Tractors
- Tire Chains by Tire Size: Fitting Chart
Browse the riding mower guides for more maintenance help for your tractor.




