Types of Fuel Lines for Small Engines
Rubber fuel lines for small engines, explained by size, fuel and temperature rating, with two 10 ft kits that include clamps.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YAMAKATO 10 ft 1/4 in Fuel Line Hose with 20 Clamps9.6/10View on Amazon - 2
Logosophia 10 ft 1/4 in Fuel Line Hose with 20 Clamps9.6/10View on Amazon
On a property with a mower, a tiller and a generator in the shed, the fuel line is the small rubber hose that carries fuel from the tank to the engine. A cracked or swollen line starves the engine or leaks fuel onto a hot surface, so the line matters more than its size suggests. Types of fuel lines differ by the fuel they carry, the job they do and how they are built, and the right one matches the engine it serves. This guide explains the types of fuel lines for small engines and how to match a line to your machine.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

YAMAKATO 10 ft 1/4 in Fuel Line Hose with 20 Clamps
10 ft of 1/4 in ID fuel line with 20 clamps, oil resistant and rated from -22F to 338F.
Who it's for: owners replacing a non-pressurized fuel line on a mower, tiller, tractor or generator who want a 10 ft run with clamps included.
Who should skip it: anyone whose engine has a fuel pump, or anyone who needs a different inside diameter than 1/4 in.
The YAMAKATO kit gives you 10 ft of 1/4 in ID fuel line with 20 clamps. The line measures 7/16 in outside diameter, and the maker rates it from -22F to 338F. The two-layer compound structure is oil resistant, and the line handles gasoline, E-85, diesel and bio-diesel. The clamps measure 10 mm inside diameter and are made of 1 mm steel. The line is non-pressurized, so it does not suit engines with fuel pumps.
Pros
- 10 ft of line that can be cut to size
- Stated temperature range from -22F to 338F
- 20 clamps included, 10 mm ID, 1 mm steel
- Two-layer compound structure, oil resistant
Cons
- Non-pressurized line only, not for engines with fuel pumps
- Only the 1/4 in ID size is offered in this kit
- Warranty term is not stated
- Clamp size is fixed at 10 mm ID in this kit

Logosophia 10 ft 1/4 in Fuel Line Hose with 20 Clamps
10 ft of 1/4 in ID fuel line with 20 clamps for gas and diesel small engines.
Who it's for: owners replacing a fuel line on a small gas or diesel engine who want a 10 ft run with clamps included.
Who should skip it: anyone whose engine has a fuel pump, or anyone who needs a different inside diameter than 1/4 in.
The Logosophia kit gives you 10 ft of 1/4 in ID fuel line with 20 clamps. The line measures 7/16 in outside diameter, and the maker rates it from -22F to 338F. It delivers gasoline, E-85, diesel and biodiesel to lawnmowers, tractors, snowblowers and off-road vehicles. The line is non-pressurized, so it does not suit engines with fuel pumps.
Pros
- 10 ft of line with 20 clamps included
- Stated temperature range from -22F to 338F
- Delivers gasoline, E-85, diesel and biodiesel
- Flexible rubber hose for small engine use
Cons
- Non-pressurized line only, not for engines with fuel pumps
- Only the 1/4 in ID size is offered in this kit
- Warranty term is not stated
- One 10 ft length per kit, so a longer run needs more line
Types of fuel lines for small engines
The maker of the YAMAKATO line (on Amazon) lists fuel lines, vapor emission lines and vacuum smog control as uses for that one hose. The Logosophia line (on Amazon) is listed for fuel delivery to small engines. The fuel a line carries sets one limit, and the pressure it works under sets another. Both lines in this guide carry gasoline, E-85, diesel and bio-diesel, and both are non-pressurized lines, which means they do not suit engines with fuel pumps.
| Line type | What it carries | Limit |
|---|---|---|
| Fuel delivery line | Gasoline, E-85, diesel and bio-diesel to the engine | Non-pressurized only, not for engines with fuel pumps |
| Vapor emission line | Fuel vapor in the emission system | Listed for the YAMAKATO hose; match the fitting size |
| Vacuum line | Vacuum connection for smog control duties | Listed for the YAMAKATO hose; match the fitting size |
Construction is the remaining difference. The YAMAKATO line uses a stretchy two-layer compound structure, with the outer layer wrapping the inner layer, and the maker states it is oil resistant with ethanol tolerance. The Logosophia line is a flexible rubber hose. Both lines are rated from -22F to 338F, so cold mornings and hot engine bays sit inside the stated range.
Match the size before you order
Inside diameter is the size that matters, because the line must fit the fittings on the tank and the engine. Both kits in this guide use a 1/4 in inside diameter, and the YAMAKATO line states it as 6.4 mm. Outside diameter is 7/16 in on both, stated as 10.4 mm on the YAMAKATO line. Measure the old line before you order, and match the inside diameter to the fitting, not the outside. Each kit gives you 10 ft of line, and the YAMAKATO line can be cut to size for the run you need. The clamps matter too: the YAMAKATO clamps measure 10 mm inside diameter and are made of 1 mm steel, and each kit includes 20 clamps. See the fuel line hose sizes guide for the full range of sizes.
Temperature range and fuels
Both lines carry the same stated temperature range, from -22F to 338F, which covers winter starts and summer work. Both lines deliver gasoline, E-85, diesel and bio-diesel. The YAMAKATO maker lists lawn mowers, tillers, tractors, snow blowers, generators and pressure washers among its uses, and the Logosophia maker lists lawnmowers, tractors, snowblowers and off-road vehicles. The YAMAKATO line adds oil resistance and ethanol tolerance to that list of fuels, and its two-layer build is listed for fuel, vapor and vacuum duty on the same machine. Check the fuel your engine burns before you buy, and match the line to that fuel, not to the machine alone.
Fuel line kits for the job
Once you know the inside diameter and the length your engine needs, a kit with the line and the clamps covers the replacement in one box.
Safety
Refuel only with the engine off and cool, and keep children and pets away from the work area while you change a line. A non-pressurized line does not belong on an engine with a fuel pump, so check the pump question before you fit the hose.
FAQ: mowing large lots
What size fuel line does a small engine use?
Both kits in this guide use a 1/4 in inside diameter and a 7/16 in outside diameter, with 10 ft of line in the box. The YAMAKATO line states the same sizes as 6.4 mm inside and 10.4 mm outside. Other engines can use other sizes, so measure your old line and match the inside diameter to the fitting on your tank and engine.
Can one fuel line carry gasoline and diesel?
Yes, for the two lines in this guide. Both deliver gasoline, E-85, diesel and bio-diesel, so the same 1/4 in line serves a mower, a tractor, a generator or a snow blower. Check the fuel your engine burns, and match the line to that fuel.
What temperature can a small engine fuel line handle?
Both lines in this guide are rated from -22F to 338F. That range covers cold starts and hot running on a small engine, and it is the same figure on both kits.
Do I need clamps with a new fuel line?
Both kits in this guide include 20 clamps with the 10 ft of line. The YAMAKATO clamps measure 10 mm inside diameter and are made of 1 mm steel, and they tighten the hose onto the fitting so fuel stays in the line.
Can I use a non-pressurized fuel line on any small engine?
No. Both lines in this guide are non-pressurized, and the makers state they do not suit engines with fuel pumps. If your engine has a fuel pump, look for a pressurized line rated for that pump instead.




