What Oil Does a Pressure Washer Take
A gas pressure washer takes engine oil for the engine and pump oil for the pump, while an electric washer takes pump oil only.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VP Racing SEF 94 Octane Ethanol-Free Small Engine Fuel9.7/10View on Amazon - 2
Hot Shot's Secret Gasoline Extreme Fuel Additive 12 oz9.6/10View on Amazon - 3
MAG 1 Pressure Washer Pump Oil 1 Quart9.5/10View on Amazon
On a property where the driveway, the siding and the patio all get washed through the season, the pressure washer earns its keep, and the oil question comes up at service time. What oil does a pressure washer take? A gas washer takes engine oil for the engine and pump oil for the pump, while an electric washer takes pump oil only. Engine oil and pump oil go in different places and do different jobs, so the first step is telling them apart.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
What oil does a pressure washer take: engine oil and pump oil
| Oil | Goes in | What the listings name |
|---|---|---|
| Engine oil | Gas engine crankcase | SAE 10W-30 for 4-stroke engines |
| Pump oil | Pump crankcase | 30-weight non-detergent oil |
| Pump oil | Pump crankcase | MAG 1 pump oil, 1 quart |
Engine oil and pump oil are different products. The Valley listing names SAE 10W-30 for 4-stroke pressure washer engines, and the General Pump listing names 30-weight non-detergent oil for pumps. The MAG 1 pump oil (on Amazon) is made for gas and electric pressure washer pumps. Read the manual for the grade and the amount your washer needs. See our pressure washer pump types guide for how the pumps differ.
Step 1: find the fill points
Look for the engine fill cap with a dipstick and the separate pump fill plug. The engine oil goes in the engine, and the pump oil goes in the pump. Putting engine oil in the pump, or pump oil in the engine, means each part runs on a lubricant made for the other job, so check the manual for where each fill point sits on your model. On Honda GX engines, a low oil sensor watches the engine oil level and shuts the engine down when it drops.
Step 2: pick the engine oil
For a gas engine, the grade the manual names is the grade to use. The Valley listing names SAE 10W-30 for 4-stroke pressure washer engines, sold as a 1-liter bottle. A fuel additive is not engine oil: the STA-BIL Small Engine Pro additive is a fuel system treatment that cleans the fuel system and protects against ethanol, but it is not a substitute for oil in the crankcase. Fuel is a separate question: see our do pressure washers take regular gas guide.
Step 3: pick the pump oil
Pump oil is a separate product from engine oil. The General Pump listing names 30-weight non-detergent oil, sold as six 16-ounce bottles. The MAG 1 pump oil comes in a 1-quart bottle and is made for gas and electric pressure washer pumps, with an anti-foam formula that resists foaming and aeration. The Mi-T-M pump oil (on Amazon) comes in 1 pt bottles. Match the pump oil to the pump, not to the engine.
Step 4: drain and refill
Run the engine briefly so the oil warms and flows, then shut it off and drain the old oil into a container, using a drain hose where the engine has a drain port: a 14-inch hose with M10 x 1.25mm fittings fits Honda GX110 to GX200 engines. Fit a fresh crush washer on the drain plug from the M10 to M18 sizes, refill to the level the manual states, and check for leaks. Wipe up spills and keep used oil out of drains and soil.
Step 5: check the level before each use
Check the engine oil on the dipstick and the pump oil at its fill plug before the washer runs. A low oil sensor helps on Honda GX160 to GX390 engines, which cover 5.5HP to 13HP, but it is a backup, not a substitute for looking. Top up with the same grade that is already in the machine.
Safety
Never point a pressure washer at people or animals, and run gas washers outdoors only. Wear eye and hearing protection, and keep children, pets and bystanders away from the work area. Refuel only with the engine off and cool. See our Safety Disclaimer.
FAQ: mowing large lots
Can I use car engine oil in a pressure washer?
Use the grade the manual names. The Valley listing names SAE 10W-30 for 4-stroke pressure washer engines. Check the manual for your engine before you pour, since the grade is set by the engine maker.
Does an electric pressure washer need oil?
An electric washer has no engine, so it takes no engine oil. Its pump may still need pump oil: the MAG 1 pump oil is made for gas and electric pressure washer pumps, so check the pump manual for the grade and the change interval.
Can I use engine oil in the pump?
Use pump oil, not engine oil, in the pump. The pump takes pump oil, such as 30-weight non-detergent oil or MAG 1 pump oil. Engine oil goes in the engine, and pump oil goes in the pump. Using the wrong oil in either place risks the part it protects.
How much pump oil does a pressure washer take?
The amount depends on the pump, and the manual states it. Pump oil is sold by the bottle: MAG 1 by the quart, Mi-T-M by the pint, and General Pump as six 16-ounce bottles. Buy the size that covers one change with some left over.
What oil does a Honda GX engine take?
Honda GX160 to GX390 engines run from 5.5HP to 13HP, and the Valley listing names SAE 10W-30 for 4-stroke pressure washer engines. Read the manual for the grade and amount your engine needs, and fit a fresh crush washer on the drain plug at each change.




