Best Air Filter for Riding Mower Under $10 (2026): 5 Picks Compared
Five riding mower air filters and packs compared by part number, stated dimensions and pack contents, with the 793569 pattern leading the list.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPowtol 793569 Filter9.5/10View on Amazon - 2
Best Value PackFerilter 2-Pack Filter9.5/10View on Amazon - 3
Best Pre-Cleaner KitKlirAir 796031 Filter9.5/10View on Amazon - 4
Best Metal MeshLonsda 793569 Filter9.4/10View on Amazon - 5
Best Universal FitKabing 793569 Filter9.4/10View on Amazon - 6
Hipa YTH2348 499486S 698754 Air Filter Replace MIU11286View on Amazon - 7
697153 698083 Air Filter Pre Filter for Lawn Mower TractorView on Amazon - 8
793569 793685 Air Filter for B&S 793569 4241 5415 331777View on Amazon - 9
Podoy 697153 698083 Air Filter with 697015 Pre Filter forView on Amazon - 10
Emmawin 17211-Z8B-901 Air FilterView on Amazon
A riding mower that coughs on dusty ground or loses power halfway through a lot usually needs a simple fix at the airbox, and the best air filter for riding mower under 10 covers that fix with a direct replacement part. This list compares 5 filters and packs by fit, stated dimensions and what each box includes, so the part that arrives matches the mower in the shed.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall Powtol 793569 Filter: Air, pre and fuel filters in one box with full dimensions stated. Check price on Amazon
- Best Value Pack Ferilter 2-Pack Filter: 2 filters plus 2 pre-filters for mowers that run dusty ground. Check price on Amazon
- Best Pre-Cleaner Kit KlirAir 796031 Filter: Pack of 2 with foam pre-cleaners and an every-season replacement recommendation. Check price on Amazon
- Best Metal Mesh Lonsda 793569 Filter: Metal mesh protection for Intek engines from 17.5 to 21 HP. Check price on Amazon
- Best Universal Fit Kabing 793569 Filter: Paper and foam double-layer filter for 18 to 21 HP engines. Check price on Amazon
Our acreage picks
Powtol 793569 Air Filter with Pre Filter and Fuel Filter
A 793569 replacement kit with an air filter, a pre filter and a fuel filter, sized at 3 in outside diameter and 5-7/8 in high, for owners of Intek 20-21 HP tractors who want the air, pre and fuel filters in one box.
Read the full review
The Powtol kit stands out because the box covers the whole intake service: an air filter, a pre filter and a fuel filter, with the air filter dimensions stated down to the outside diameter, inside diameter and height. The listing states the seal is polyurethane rubber with permanent resilience, and the maker claims 99% effective cleaning with minimal airflow obstruction.
Fitment centers on the 793569 pattern for Intek 20-21 HP tractors and the John Deere, Craftsman and Husqvarna models the listing names, so match the old part number before ordering. No warranty term is stated, which keeps the warranty score at zero, but the stated dimensions and the three-piece box earn this kit the top rank here.
Pros
- Air filter, pre filter and fuel filter arrive in one box
- Full dimensions stated: 3 in outside diameter and 5-7/8 in high
- Polyurethane rubber seal for sealing under severe duty
- Maker claims 99% effective cleaning with minimal airflow obstruction
Cons
- No warranty term is stated in the listing
- Pre-filter dimensions are listed separately and must be checked
- Fits only the 793569 pattern, so other part numbers need a different filter
- A single fuel filter is in the box, so a second service needs another kit
Ferilter 698083 Air Filter and Pre Filter Pack of 2
A pack of 2 air filters with 2 pre-filters in a rectangular 9 x 3.15 x 1.5 in size, for owners of Craftsman, MTD and Toro mowers who want a spare filter on the shelf.
Read the full review
The Ferilter pack is the spare-set pick: 2 air filters and 2 pre-filters in a rectangular 9 x 3.15 x 1.5 in size, built from rubber and filter paper the maker calls breathable. The listing says the filters prevent tiny particles from entering the carburetor and engine, which matters on dusty ground.
Coverage spans Craftsman LT1000, LT3000 and related models plus Toro, MTD, Cub Cadet, Troy-bilt, Husqvarna and John Deere patterns in the 698083 family, across 12-15.5 HP, 17.5 HP and 18.5 HP engines. No warranty term is stated, and no fuel filter is included, but the second set in the box is real value at this size.
Pros
- 2 filters plus 2 pre-filters, so a spare set stays on the shelf
- Rubber and filter paper build the maker calls breathable
- Dimensions stated at 9 x 3.15 x 1.5 in
- Fits 12-15.5 HP, 17.5 HP and 18.5 HP engines
Cons
- No warranty term is stated in the listing
- Rectangular shape fits only the 698083 pattern family
- No fuel filter is included in the pack
- No metal mesh protection is stated
KlirAir 796031 Air Filter with 797704 Foam Pre-Cleaner Pack of 2
A pack of 2 round filters with 797704 foam pre-cleaners, sized 5 x 3 x 1-1/2 in, for Husqvarna and John Deere owners who replace filters every season.
Read the full review
The KlirAir pack pairs 2 round filters with 797704 foam pre-cleaners, built from pleated filter paper, rubber and metal for an extended life. Dimensions are stated plainly at 5 in high, 3 in outside diameter and 1-1/2 in inside diameter, which makes checking fit against the old filter straightforward.
The listing recommends replacing filters every season for best performance, a schedule that suits owners who mow through dusty summers. No engine HP range and no warranty term are stated, so check the 796031, 591334 and 594201 part numbers against the mower before ordering.
Pros
- Pack of 2 filters with 797704 foam pre-cleaners
- Pleated filter paper with rubber and metal materials
- Dimensions stated at 5 in high, 3 in outside diameter, 1-1/2 in inside diameter
- Maker recommends replacing filters every season
Cons
- No warranty term is stated in the listing
- No engine HP range is stated in the listing
- Round shape fits only the 796031 pattern family
- Pre-cleaner fit must be checked against the old foam part
Lonsda 793569 Air Filter for 17.5 to 21 HP Engines
A single 793569 replacement with metal mesh protection, for owners of Intek 20-21 HP tractors and the John Deere, Craftsman and Husqvarna models the listing names.
Read the full review
The Lonsda filter is a single 793569 replacement with a metal mesh protection design the maker says extends working life and improves airflow while keeping dirt and dust out. Coverage is wide, spanning B&S Intek 20-21 HP engines and John Deere, Craftsman, Husqvarna, Ariens, Troy-bilt and MTD models.
Two gaps hold it back: no dimensions are stated anywhere in the listing, so the old filter must be measured first, and the listing states plainly that this is not an original B&S part and is not made or authorized by Briggs & Stratton. No warranty term is stated either.
Pros
- Metal mesh protection design for longer working life
- Wide model coverage across B&S, John Deere, Craftsman, Husqvarna, Ariens, Troy-bilt and MTD
- Maker claims high filtration accuracy for fine particles
- Direct replacement for the original equipment filter
Cons
- No dimensions are stated in the listing
- No warranty term is stated in the listing
- Not an original B&S part, and not made or authorized by Briggs & Stratton
- Single filter only, with no pre-filter in the box
Kabing 793569 Air Filter for 18 to 21 HP Engines
A single 793569 replacement in filter paper and foam with a double-layer build, sized 3.5 x 3.5 x 5.83 in, for owners of 18 to 21 HP engines who want a universal-fit filter.
Read the full review
The Kabing filter uses filter paper and foam in a double-layer build the maker says gives high filtration efficiency and large dust holding capacity, sized at 3.5 x 3.5 x 5.83 in. Coverage spans the 793569 pattern across B&S Intek engines and John Deere, Craftsman and Husqvarna models.
One point needs care: the spec table calls the fit universal while the title names specific OEM part numbers, so trust the part number on the old filter over the word universal. The listing supports returns and exchanges but states no warranty term, and no pre-filter is included.
Pros
- Filter paper and foam with double-layer action
- Dimensions stated at 3.5 x 3.5 x 5.83 in
- Wide model coverage across B&S, John Deere, Craftsman and Husqvarna
- Maker claims large dust holding capacity
Cons
- Universal fit, while the title names specific OEM part numbers, so check the old filter
- No warranty term is stated, only returns and exchanges support
- Single filter only, with no pre-filter in the box
- No metal mesh protection is stated
Other machines to compare
Hipa YTH2348 499486S 698754 Air Filter Replace MIU11286Check price on Amazon
697153 698083 Air Filter Pre Filter for Lawn Mower TractorCheck price on Amazon
793569 793685 Air Filter for B&S 793569 4241 5415 331777Check price on Amazon
Podoy 697153 698083 Air Filter with 697015 Pre Filter forCheck price on Amazon
Emmawin 17211-Z8B-901 Air FilterCheck price on Amazon
Side-by-side specs
| Filter | Acre Score | Replaces | Pack | Dimensions | Engine range |
|---|---|---|---|---|---|
| Powtol 793569 Filter | 9.5/10 | 793569, 793685 | Air, pre and fuel filter | 3 in OD, 5-7/8 in high | 20-21 HP |
| Ferilter 2-Pack Filter | 9.5/10 | 698083, 795115 | 2 filters, 2 pre-filters | 9 x 3.15 x 1.5 in | 12-15.5, 17.5, 18.5 HP |
| KlirAir 796031 Filter | 9.5/10 | 796031, 591334 | 2 filters, 2 pre-cleaners | 5 x 3 x 1-1/2 in | Not stated |
| Lonsda 793569 Filter | 9.4/10 | 793569, 793685 | 1 filter | Not stated | 17.5-21 HP |
| Kabing 793569 Filter | 9.4/10 | 793569, 793685 | 1 filter | 3.5 x 3.5 x 5.83 in | 18-21 HP |
Specifications are manufacturer rated as listed, collected 25 October 2026.
Acreage and terrain fit
Powtol 793569 Filter
Ferilter 2-Pack Filter
KlirAir 796031 Filter
Lonsda 793569 Filter
Kabing 793569 Filter
How to choose the best air filter for riding mower under 10
Match the part number first
Every filter here replaces a specific OEM pattern: 793569 for most of the list, 796031 for the KlirAir pack and 698083 for the Ferilter pack. Read the number off the old filter before ordering, since a filter from another pattern will not match the airbox.
Dimensions decide the fit
Three listings state full dimensions: Powtol at 3 in outside diameter and 5-7/8 in high, Ferilter at 9 x 3.15 x 1.5 in and KlirAir at 5 x 3 x 1-1/2 in, while Lonsda states none. When the listing gives no dimensions, measure the old filter before ordering.
Packs and pre-filters
Ferilter and KlirAir ship 2 filters with pre-filters or pre-cleaners, Powtol adds a fuel filter to its single air filter, and Lonsda and Kabing ship a single filter alone. A second filter on the shelf means the next change does not wait on a new order.
When to change the filter
KlirAir recommends replacing filters every season for best performance. For push mowers, see the best air filter for push mower under $10 list, and for the whole machine, follow the riding mower maintenance guide.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- Flat, open lawns: any 793569 filter here fits the Intek-powered lawn tractors the listings name, so pick by pack contents.
- Dusty, rough ground: the 2-filter packs from Ferilter and KlirAir keep a spare ready when dust loads the filter fast.
- Shed storage: a single-filter box from Lonsda or Kabing suits owners who change one filter at a time, while the 2-packs suit owners who stock spares.
- Mixed fleet: a household with both a 793569 tractor and a 698083 mower needs two different part numbers, so check each mower before ordering.
The Acre Score explained
The Acre Score weighs performance (fit and filtration), build quality (materials and construction), value (pack contents for the size), safety and warranty. No listing here states a safety feature or a warranty term, so safety and warranty score zero across the list and the ranking turns on fit, build and pack contents. How we pick explains the weights.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Powtol 793569 Filter | 9.5 | 30 | 21 | 21 | 0 | 0 |
| Ferilter 2-Pack Filter | 9.5 | 29 | 20 | 22 | 0 | 0 |
| KlirAir 796031 Filter | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Lonsda 793569 Filter | 9.4 | 28 | 20 | 19 | 0 | 0 |
| Kabing 793569 Filter | 9.4 | 27 | 19 | 19 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: mowing large lots
How do I know which air filter fits my riding mower?
Match the OEM part number on the old filter: 793569 covers most picks here, while KlirAir uses 796031 and Ferilter uses 698083. Check the engine series and the stated dimensions against the old filter before ordering.
How often should a riding mower air filter be replaced?
The KlirAir listing recommends replacing filters every season for best performance. The other listings state no interval, so follow the mower manual and check the filter when it looks dirty.
Does every filter here include a pre-filter?
No. Powtol, Ferilter and KlirAir include a pre-filter or pre-cleaner, while Lonsda and Kabing ship a single filter with no separate pre-filter stated.
Can a 793569 filter fit any riding mower?
No. It fits the B&S Intek, John Deere, Craftsman and Husqvarna models each listing names, so confirm the part number and engine series first.
More mowing guides
- Best Air Filter for Push Mower Under $10 (2026): 4 Picks
- Best Air Filter for Riding Mower (2026): 5 Compared
- Best Air Filter for Zero Turn Mower (2026): 5 Picks, Filters and Kits
- Best Fuel Filter for Lawn Mower Under $10 (2026)
- Best Oil Filter for Lawn Mower Under $20: 5 Compared
- Riding Mower Maintenance: Step-by-Step Care Guide
- Best Deck Belt for Riding Mower Under $25 (2026): 5 Picks
- Best Carburetor for Riding Mower Under $25 (2026)
