Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Are Pressure Washer Guns Universal? Fitting Guide

Pressure washer guns are not universal, so match the hose fitting, pressure rating and wand length before ordering a replacement.

Are Pressure Washer Guns Universal? Fitting Guide
On this page

On a property with a long driveway, a deck and a roof line, a pressure washer earns its keep, and the gun is the part your hand holds all day. Are pressure washer guns universal? No. A gun fits only when its inlet matches the hose end, its pressure rating covers the washer, and its outlet takes the accessories you already own. This guide walks through each check in order, so the replacement you order threads on the first time.

As an Amazon Associate I earn from qualifying purchases. AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Are pressure washer guns universal: the fitting decides

The hose end is the first check, because a gun that will not thread on is no use at any pressure. A home washer hose can end in a threaded fitting, and the gun must carry the same thread. Sooprinse lists a gun with an M22-14 fitting, which connects directly to a high pressure hose with an M22-14mm end, and the maker notes it does not fit garden hoses, water pipes or faucets directly. Before ordering, read the fitting size stamped on the hose coupling, then match it to the gun. Our pressure washer guides cover the washer side of the setup.

Fitting Where it connects Check before ordering
M22-14 High pressure hose end, M22-14mm Hose coupling must read M22-14
1/4-inch quick connector Nozzle tips, foam cannon, surface cleaner and other accessories with a 1/4-inch plug Accessory plug must match the 1/4-inch connector

Keep the old gun beside the new gun while you compare. A fitting that looks close can still refuse to thread, and forcing it damages the coupling.

Step 2: match the pressure rating

A gun carries a pressure rating, and the washer must stay within it. Sooprinse lists a gun rated at 4000 PSI, which suits washers rated at or below that figure. A gun rated below the washer can give way at the trigger or the seals, so read the rating on the washer plate and on the gun. The rating sets the safe ceiling for the washer and gun, separate from whether the fitting threads on. See our guide on pressure washer pump protector for the rest of the washer care routine.

Step 3: pick the wand length

Wand length sets how far you stand from the surface and how much reach you have overhead. Sooprinse lists lengths of 12, 26 and 42 inches on the same gun, so the length can change with the job. A 12 inch wand suits close work on the driveway and the deck. A 26 inch wand suits siding and fences. A 42 inch wand suits the roof line and high walls. Store the wand where it will not bend, and keep the tip clear of grit.

Step 4: choose the nozzle spray angle

The nozzle tip sets the spray angle, and the angle sets how hard the water hits. The Sooprinse gun (on Amazon) ships with 5 nozzle tips in angles of 0, 15, 25, 40 and 65 degrees, with the widest angle marked for soap. A narrow angle suits stubborn grime on concrete, while a wide angle suits rinsing siding, vehicles and deck boards. Change tips only with the washer off and the pressure released, and keep spare tips where they will not roll away.

Step 5: check the trigger lock and the quick connector

The trigger lock is the small catch that keeps the gun from firing when you set it down. The Sooprinse gun carries a safety lock trigger, which the maker lists as a guard against pulling the trigger by accident. Check that the lock moves freely and holds before each wash. The outlet on the same gun is a 1/4-inch quick connector, which takes any accessory with a 1/4-inch plug, such as nozzle tips, a foam cannon, an extension wand, a surface cleaner or a water broom. If an accessory you own uses a different plug, it will not seat.

What to do when the gun does not fit

When the thread will not start, stop and compare the ends side by side. Read the fitting size on the hose coupling and on the gun, and check whether the hose end is M22-14. A gun that threads on part way and then binds is the wrong thread, not a tight fit, so do not force it. When the gun fits the hose but an accessory will not seat, check the plug on the accessory against the 1/4-inch connector. If nothing matches, return the gun and order by the fitting size on your hose, not by the washer brand alone. See our guide on using a pressure washer without a hose for the rest of the setup.

Safety

Never point a pressure washer gun at people or animals, and keep the spray away from skin at any distance. Run gas washers outdoors only, and keep children, pets and bystanders out of the work area. Wear eye protection and sturdy shoes, and follow the manual for your washer.

FAQ: mowing large lots

Are pressure washer guns universal across brands?

No. The brand on the washer does not set the fit; the fitting on the hose does. A gun with an M22-14 fitting threads onto a hose with an M22-14mm end, and a gun with a different thread will not thread on at all.

What fitting does a pressure washer gun use?

The Sooprinse gun cited in this guide uses an M22-14 fitting at the hose end and a 1/4-inch quick connector at the outlet, so for that gun the hose must end in M22-14 and accessories must carry a 1/4-inch plug. Read the fitting size on your hose coupling before ordering.

Can I use a gun rated at 4000 PSI on a smaller washer?

Yes, when the washer rating sits at or below the gun rating. A gun rated at 4000 PSI covers washers rated at or below that figure, so keep the gun rating at or above the washer.

What do the nozzle angles mean?

The angle is the width of the spray fan. Nozzle tips in angles of 0, 15, 25, 40 and 65 degrees run from a narrow jet to a wide fan, with the 65 degree tip marked for soap.

How long should a pressure washer wand be?

Long enough to reach without a ladder and short enough to control. Wand lengths of 12, 26 and 42 inches cover close work on the driveway and deck, siding and fences, and the roof line and high walls.

More mowing guides

Use the Mower Matcher to narrow down choices by acreage, terrain, budget, and power type.

More buying guides