Ariens Shear Pin Size Chart: Sizes and Fits
The Ariens pin measures 1/4 in thread at 1-9/16 in integral, while the Qloby and YOBME pins measure 1/4 in across at 1.65 in or 1.5 in long.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Jzenol Shear Pin Nut Set for Ariens 532005 510016, 10 Pack9.5/10View on Amazon - 2
Qloby 30 Pack Metal Cotter Snowblower Shear Pins, 738-04124A and 714-040409.5/10View on Amazon - 3
YOBME Shear Pins and Cotter Pins, 10 Pairs, 738-04124A and 714-040409.4/10View on Amazon - 4
Spuspk Snowblower Shear Pins and Cotter Pins, 20 Sets, 738-04124 and 714-040409.4/10View on Amazon
The auger stops dead in the driveway and the engine keeps running: a shear pin has done its job and broken. An Ariens shear pin size chart starts with the pin the machine manual names, and this guide lays out the sizes the listings state, so the replacement matches the machine.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Jzenol Shear Pin Nut Set for Ariens 532005 510016, 10 Pack
The Ariens pin in this guide: a 10-pack of 1/4 in thread pins with nuts for Ariens Classic, Compact and SNO Tek models, sized 1-9/16 in integral.
Who it's for: an Ariens owner who needs the 532005 or 510016 pin and wants the size stated in the listing.
Who should skip it: anyone with an MTD, Craftsman or Troy Bilt machine, or anyone who wants a stated warranty term.
The Jzenol set replaces Ariens 532005 and 510016, with a 1/4 in thread pin sized 1-9/16 in integral and about 1-7/16 in from head to toe, with a nut. The listing names Classic 24E, Compact 20, Compact 22, Compact 24, Compact Track 24 and SNO Tek 20, 22, 24, 26 and 28 models, plus a long list of ST-series machines. Check the spec table: it lists part numbers 21413-1 and 2413-1, which do not match the Ariens numbers in the title, so trust the title and bullets.
Pros
- Ariens part numbers 532005 and 510016 stated in the title
- Pin size stated as 1-9/16 in integral and about 1-7/16 in head to toe
- Fits Classic 24E, Compact 20, 22 and 24, Compact Track 24 and SNO Tek models
- Install stated at about 5 minutes with no special tools, gloves advised
Cons
- No warranty term is stated in the listing
- Steel grade is not stated beyond high-quality metal
- 10-pack only; no larger pack size is listed

Qloby 30 Pack Metal Cotter Snowblower Shear Pins, 738-04124A and 714-04040
A 30-pack of 1/4 in by 1.65 in pins with cotter pins and a storage box, for MTD, Craftsman, Cub Cadet and Troy Bilt machines.
Who it's for: an MTD-family owner who wants a large pack with the pin size stated and a box to keep it in.
Who should skip it: anyone with an Ariens machine, since no Ariens fit is stated.
The Qloby set holds 30 shear pins and 30 cotter pins with a storage box, sized 1/4 in in diameter by 1.65 in long. The listing states models 738-04124A, 738-04124 and 714-04040, and names MTD, Craftsman, Cub Cadet, Troy Bilt, Yard Man, Yard Machines, Huskee and Bolens machines. It fits most 2-stage snowblowers and some 3-stage machines, per the listing.
Pros
- Pin size stated: 1/4 in diameter by 1.65 in long
- 30 pins and 30 cotter pins with a storage box
- Models 738-04124A, 738-04124 and 714-04040 stated
- Fits most 2-stage and some 3-stage snowblowers, per the listing
Cons
- No Ariens fit stated; the listing names MTD, Craftsman, Cub Cadet and Troy Bilt
- No warranty term is stated in the listing
- No pin size for the cotter pin is stated
- No steel grade is stated beyond high-quality metal

YOBME Shear Pins and Cotter Pins, 10 Pairs, 738-04124A and 714-04040
A 10-pair set of 0.25 in by 1.5 in pins with cotter pins, for MTD, Craftsman and Troy Bilt machines.
Who it's for: an MTD-family owner who wants a small pack with the pin size stated.
Who should skip it: anyone with an Ariens machine, or anyone who wants a stated warranty term.
The YOBME set holds 10 shear pins and 10 cotter pins, sized 0.25 in by 1.5 in. The listing states 738-04124A replaces 738-04124 and 714-04040 replaces 02-901, and names MTD, Craftsman and Troy Bilt machines, plus yard machines and lawn tractors. It fits most 2-stage snowblower models and some 3-stage models, per the listing.
Pros
- Pin size stated: 0.25 in by 1.5 in
- 10 pins and 10 cotter pins in the package
- Replaces 738-04124 and 714-04040, plus 02-901
- Fits most 2-stage snowblower models and some 3-stage models, per the listing
Cons
- No Ariens fit stated; the listing names MTD, Craftsman and Troy Bilt
- No warranty term is stated in the listing
- No pin size for the cotter pin is stated
- No steel grade is stated beyond high-quality metal

Spuspk Snowblower Shear Pins and Cotter Pins, 20 Sets, 738-04124 and 714-04040
A 20-set pack of pins and cotter pins for MTD, Craftsman, Troy Bilt and Cub Cadet machines, with no pin size stated in the listing.
Who it's for: an MTD-family owner who wants a mid-size pack and states the model numbers plainly.
Who should skip it: anyone who needs the pin size in the listing, or anyone with an Ariens machine.
The Spuspk set holds 20 sets of shear pins and cotter pins for models 738-04124 and 714-04040, naming MTD, Craftsman, Troy Bilt and Cub Cadet machines. The listing states the shear pin protects other parts from damage by breaking when the machine hits ice or rock, and the cotter pin holds the blade and frame in place. No pin size is stated anywhere in the listing, so match the model numbers to the machine manual before ordering.
Pros
- 20 sets of shear pins and cotter pins
- Models 738-04124 and 714-04040 stated
- Listing states the pin protects other parts by breaking on impact with ice or rock
- Install stated as easy with no specialized skills needed
Cons
- No pin size is stated anywhere in the listing
- No Ariens fit stated; the listing names MTD, Craftsman, Troy Bilt and Cub Cadet
- No warranty term is stated in the listing
- Storage box is not stated in the listing
Other machines to compare
4 Pack 2-Stage Snow Blower Shear Pin ASP2400D for EGO 24" 28"Check price on Amazon
KPALAG 10PCS Snow Blower Shear Pin SetsCheck price on Amazon
Snow Blower Shear Pin 703063 Cotter Pins 10 PackCheck price on Amazon
For Polaris ATV Snow Plow Shear Pin Glacier Plow Pin ReplaceCheck price on Amazon
Ariens shear pin size chart: the short answer
For Ariens machines, the Jzenol listing states a 1/4 in thread pin, 1-9/16 in integral and about 1-7/16 in from head to toe, made to replace Ariens 532005 and 510016. The other listings in this guide are for the MTD family, not Ariens: their pins measure 1/4 in in diameter, at 1.65 in long in the Qloby listing and 1.5 in long in the YOBME listing. Check the model numbers in the machine manual before ordering, since a pin that looks right can still be the wrong size.
| Pin | Size stated | Models stated |
|---|---|---|
| Jzenol Ariens 532005 | 1/4 in thread, 1-9/16 in integral | Ariens 532005, 510016 |
| Qloby 738-04124A | 1/4 in dia x 1.65 in long | 738-04124A, 738-04124, 714-04040 |
| YOBME 738-04124A | 0.25 in x 1.5 in | 738-04124A, 714-04040 |
| Spuspk 738-04124 | Not stated | 738-04124, 714-04040 |
The pins for these jobs
The Ariens pin below handles the Ariens machines, while the remaining pins cover the MTD family machines by model number, and the pin size is the measurement to check.
How to match a pin to the machine
Start with the machine manual, not the pin. The listings here name their models plainly: the Jzenol listing names Ariens 532005 and 510016, and the Qloby and YOBME listings name 738-04124A and 714-04040 while the Spuspk listing names 738-04124 and 714-04040, for MTD, Craftsman, Troy Bilt and Cub Cadet machines. The Qloby listing states the pin size as 1/4 in in diameter by 1.65 in long, and the YOBME listing states 0.25 in by 1.5 in, while the Spuspk listing states no pin size at all. If the size is not stated, match the model numbers and check the manual before ordering.
The pin is made to break when the auger hits ice or rock, so the impact does not pass through to the rest of the machine. The Spuspk listing states the pin protects other parts of the snow blower from damage when the machine hits a large piece of ice or rock, and the YOBME listing states it protects the auger when it meets branches, thick ice or rocks. That is why the pin size and the model numbers matter more than the pack size.
How to swap a pin
Push the shear pin through, lock it in place with the cotter pin and check it, as the Qloby and YOBME listings describe. The Jzenol listing states the swap takes about 5 minutes with no special tools, and to wear gloves during the replacement. The Jzenol set locks with a nut, not a cotter pin. The Spuspk listing states no specialized skills are needed. The Qloby, Spuspk and YOBME listings say to confirm the part against the manual first.
A simple shear pin checklist
- Model numbers match the machine manual: Ariens 532005 or 510016, or 738-04124A, 738-04124 and 714-04040
- Pin size stated in the listing: 1/4 in thread for Ariens, 1/4 in by 1.65 in or 0.25 in by 1.5 in for the MTD family
- Cotter pins or nuts in the pack: 30 cotter pins with the Qloby set, 20 sets with the Spuspk set, 10 pairs with the YOBME set, and nuts with the Jzenol set
- Gloves on hand for the swap, per the Jzenol listing
- Spare pins kept in the storage box, per the Qloby listing
For the machine around the pins, see our snow blower picks and the mower maintenance guides.
FAQ: mowing large lots
What size shear pin does an Ariens snowblower use?
The Jzenol listing states a 1/4 in thread pin, 1-9/16 in integral and about 1-7/16 in from head to toe, made to replace Ariens 532005 and 510016. Check the machine manual for the model before ordering.
What size shear pin fits a Craftsman snowblower?
The Qloby and YOBME listings state 1/4 in in diameter: the Qloby pin is 1.65 in long and the YOBME pin is 1.5 in long, both for models 738-04124A and 714-04040. The Spuspk listing states 738-04124 and 714-04040 with no pin size stated.
Can I use an MTD shear pin on an Ariens snowblower?
No, not on the listings here. The MTD-family pins state models 738-04124A or 738-04124 and 714-04040, while the Ariens pin states 532005 and 510016. Match the model numbers in the machine manual.
How do I install a snowblower shear pin?
Push the shear pin through, lock it in place with the cotter pin and check it, as the Qloby and YOBME listings describe. The Jzenol listing states the swap takes about 5 minutes with no special tools, and to wear gloves. The Jzenol set locks with a nut, not a cotter pin.
How many shear pins should I keep on hand?
The listings here sell packs of 10, 20 and 30 pins, so the pack size is the choice: the YOBME set holds 10 pairs, the Spuspk set holds 20 sets and the Qloby set holds 30 pins with a storage box.
More mowing guides
- Best Shear Pins for Snow Blower Under 10 (2026): 5 Picks
- Best Auger Belt for Snow Blower Under $15 (2026)
- Best Drive Belt for Snow Blower (2026)
- Best Snow Blower Chute Clearing Tool (2026)
- Best Skid Shoes for Snow Blower Under $20 (2026)
- Cost of a Snow Blower (2026): What Drives the Price
See the walk-behind and robotic guides and the mower maintenance guides.




