Best Atv Hand Guards (2026): 5 Picks Compared
Five universal hand guards for ATVs and dirt bikes, compared by bar fitment, bracket material, guard panel and hardware kit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPRO CAKEN Hand Guards9.5/10View on Amazon - 2
Best Cut-Out DesignJFG RACING Hand Guards9.5/10View on Amazon - 3
Best Solid PanelWacece ATV Handguards9.4/10View on Amazon - 4
Best Hardware KitWATODAY ATV Handguards9.4/10View on Amazon - 5
Best Bar-End MountAcerbis Rally Pro9.2/10View on Amazon
Brush leans over the trail, branches snap back at the bars and cold wind bites bare hands while you ride. Out on the property, the ground is rough, the edges are overgrown and the work runs through mud, rocks and low limbs, and the best atv hand guards keep hands and levers clear of all of it. This guide compares guards by fitment, bracket, guard material and what comes in the box.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall PRO CAKEN Hand Guards: 6061 aluminum CNC bracket and reinforced PP guard fit 7/8 and 1 1/8 in bars, with easy bar-end mounting. Check price on Amazon
- Best Cut-Out Design JFG RACING Hand Guards: 6061 aluminum and PP plastic with a cut-out design, room for cables and brake lines, at 1.74 lb. Check price on Amazon
- Best Solid Panel Wacece ATV Handguards: Solid PP panels block wind and debris on 7/8 and 1 1/8 in bars, with simple mounting and no special tools. Check price on Amazon
- Best Hardware Kit WATODAY ATV Handguards: CNC billet aluminum brackets and slip-collar inserts for 7/8 in bars, with screws, nuts and an allen wrench. Check price on Amazon
- Best Bar-End Mount Acerbis Rally Pro: Indexed steel bar-end insert mounts solidly and will not let the guard rotate in a crash. Check price on Amazon
Our acreage picks

PRO CAKEN Universal Hand Guards, 7/8 and 1 1/8 in
Universal hand guards with a 6061 aluminum CNC bracket and a reinforced PP guard plate, fitting 7/8 and 1 1/8 in round handlebars.
The PRO CAKEN guards fit the widest range of bars here: 7/8 in (22 mm) and 1 1/8 in (28 mm) round handlebars. The bracket is 6061 aluminum alloy, CNC forged, and the guard plate is reinforced PP.
Pros
- Fits both 7/8 in (22 mm) and 1 1/8 in (28 mm) round handlebars
- 6061 aluminum alloy bracket, CNC forged, with a reinforced PP guard plate
- Guards hands from mud, cold wind, rocks and debris
- Simple install: insert into the handlebar end and tighten as the spacer expands
Cons
- Does not fit 1-1/4 in oversized handlebars
- Check lever, throttle and dashboard clearance before installation, per the maker
- Minor adjustment may be required on some bars, per the maker
- No warranty term is stated

JFG RACING Dirt Bike Hand Guards, 7/8 and 1 1/8 in
Universal hand guards in 6061 aluminum and PP plastic with a cut-out design, fitting 7/8 and 1 1/8 in handlebars.
The JFG guards pair a 6061 aluminum bracket with a PP plastic outer shield, in a cut-out design. They fit 7/8 and 1 1/8 in handlebars and weigh 1.74 lb.
Pros
- Fits 7/8 and 1 1/8 in handlebars on dirt bikes, ATVs and scooters
- 6061 aluminum bracket with a PP plastic outer shield
- Cut-out design gives a lighter look
- Plenty of room for cables and brake lines
Cons
- Cut-out shield leaves more of the hand exposed than a solid panel
- Cut-out design blocks less cold wind than a solid panel
- Fits 7/8 and 1 1/8 in bars only, so check bar size before ordering
- Universal shape covers many bike types, not ATVs alone

Wacece ATV Handguards, 7/8 and 1 1/8 in, Solid Panel
ATV handguards with solid PP panels for 7/8 and 1 1/8 in handlebars, blocking wind and debris on TRX, LTZ400 and Raptor models.
The Wacece guards are the ATV-specific pick here, made for TRX, LTZ400, Raptor and Grizzly models on 7/8 and 1 1/8 in handlebars. The solid PP panels block wind and debris.
Pros
- Solid panels block wind and debris and keep hands warm
- Fits 7/8 in (22 mm) and 1 1/8 in (28 mm) handlebars
- Made for ATV models including TRX, LTZ400, Raptor and Grizzly
- Simple install with no professional skills or special tools, per the maker
Cons
- Solid panels block airflow as well as wind, so hands run warmer in summer
- Large solid panels suit full-size ATVs more than small pit bikes
- Fits most ATV models, so check the fitment list for your machine
- PP panels are tough yet flexible, so a hard hit can flex the guard

WATODAY ATV Handguards, 7/8 in
ATV handguards for 7/8 in handlebars with CNC billet aluminum brackets, molded plastic guards and a full hardware kit.
The WATODAY guards fit 7/8 in (22 mm) handlebars. CNC billet aluminum brackets with an anodized finish, and molded plastic guards stand up to branches, bush and rocks.
Pros
- CNC billet aluminum brackets with an anodized finish against corrosion and scratching
- Slip-collar inserts let the guards rotate on severe impacts
- Molded plastic guards stand up to branches, bush and rocks
- Full kit: 2 handguards, washers, screws and nuts, and an allen wrench
Cons
- Fits 7/8 in (22 mm) handlebars only, not 1 1/8 in bars
- Molded plastic guards, where the PRO CAKEN guard plate is reinforced PP
- Guards rotate on severe impacts, so they need repositioning after a hard hit
- A kit covers one machine, so another machine needs another kit

Acerbis Rally Pro X-Strong Handguard
A Rally Pro X-Strong handguard with an indexed steel bar-end insert that mounts solidly and will not let the guard rotate in a crash.
The Acerbis Rally Pro uses an indexed steel bar-end insert that mounts solidly and will not let the guard rotate in a crash, with room for cables and brake lines. The warranty covers manufacturers defect.
Pros
- Indexed steel bar-end insert mounts solidly and will not let the guard rotate in a crash
- Plenty of room for cables and brake lines
- X-Strong build, per the maker
- Steel bar-end insert, where other picks use aluminum or plastic mounts
Cons
- Confirm bar fitment before ordering, since the guard is sold by part number
- No warranty term is stated
- Fixed insert will not let the guard rotate in a crash, so impacts reach the bars
- Warranty covers manufacturers defect only
Side-by-side specs
| Model | Acre Score | Fitment | Bracket material | Guard material | Panel | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| PRO CAKEN Hand Guards | 9.5/10 | 7/8 and 1 1/8 in | 6061 aluminum | Reinforced PP | Not stated | Not stated | Not stated |
| JFG RACING Hand Guards | 9.5/10 | 7/8 and 1 1/8 in | 6061 aluminum | PP plastic | Cut-out | 1.74 lb | Not stated |
| Wacece ATV Handguards | 9.4/10 | 7/8 and 1 1/8 in | Not stated | PP plastic | Solid | Not stated | Not stated |
| WATODAY ATV Handguards | 9.4/10 | 7/8 in | CNC billet aluminum | Molded plastic | Not stated | Not stated | Not stated |
| Acerbis Rally Pro | 9.2/10 | Not stated | Steel bar-end insert | Not stated | Not stated | Not stated | Not stated |
Every figure repeats what the brand’s listing states (22 November 2026).
Acreage and terrain fit
PRO CAKEN Hand Guards
JFG RACING Hand Guards
Wacece ATV Handguards
WATODAY ATV Handguards
Acerbis Rally Pro
Buying guide: choosing the best atv hand guards
Fitment and bar size
Bar size decides fit. The PRO CAKEN, JFG and Wacece guards fit both 7/8 in (22 mm) and 1 1/8 in (28 mm) round handlebars, while the WATODAY guards fit 7/8 in (22 mm) bars only. The PRO CAKEN guards do not fit 1-1/4 in oversized bars, and the maker warns to check lever, throttle and dashboard clearance before installation. The Acerbis guard is sold by part number, so confirm bar size before ordering.
Bracket and guard material
The bracket takes the hit, so its material matters. The PRO CAKEN bracket is 6061 aluminum alloy, CNC forged, with a reinforced PP guard plate. The JFG bracket is 6061 aluminum with a PP plastic shield, and the WATODAY brackets are CNC billet aluminum with an anodized finish. The Acerbis guard uses an indexed steel bar-end insert, while the Wacece guards use PP plastic panels with a connecting bracket.
Solid panels vs cut-out guards
Solid panels block more wind and debris. The Wacece solid PP panels block wind and debris and keep hands warm in colder climates. The JFG cut-out design gives a lighter look and a clean handlebar profile, with room for cables and brake lines. The PRO CAKEN reinforced PP plate and the WATODAY molded plastic guards give coverage for hands and levers.
What comes in the box
The WATODAY kit is the fullest here: 2 handguards, 2 CNC bracket washers, 2 stainless steel screws and nuts, and 1 allen wrench. The PRO CAKEN guards install with a bar-end insert and an expanding spacer, and the Wacece guards install by aligning the bracket and tightening the screws.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
Match the guard to the ground you ride.
- Wooded trails: the Wacece solid panels and the PRO CAKEN reinforced PP plate block branches and debris.
- Cold-weather riding: the Wacece solid panels block wind and keep hands warm, and the PRO CAKEN guards shield hands from mud and cold wind.
- Rocky ground: the PRO CAKEN guard stands up to hits from rocks and debris, and the WATODAY slip-collar inserts let the guards rotate on severe impacts.
The Acre Score explained
The Acre Score weighs five factors: performance (fitment range, hand and lever protection), build quality (bracket and guard material), value (what the kit includes), safety and warranty. A factor the maker does not state scores zero.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| PRO CAKEN Hand Guards | 9.5 | 30 | 21 | 20 | 0 | 0 |
| JFG RACING Hand Guards | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Wacece ATV Handguards | 9.4 | 28 | 19 | 20 | 0 | 0 |
| WATODAY ATV Handguards | 9.4 | 27 | 20 | 19 | 0 | 0 |
| Acerbis Rally Pro | 9.2 | 23 | 18 | 15 | 0 | 0 |
We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower.
FAQ: mowing large lots
What size hand guards fit my ATV?
Most guards here fit 7/8 in (22 mm) and 1 1/8 in (28 mm) round handlebars, including the PRO CAKEN, JFG and Wacece guards. The WATODAY guards fit 7/8 in bars only, and the PRO CAKEN guards do not fit 1-1/4 in oversized bars.
Do ATV hand guards block wind and cold?
Solid panels block the most wind: the Wacece solid PP panels block wind and debris and keep hands warm in colder climates. The PRO CAKEN guards shield hands from mud and cold wind.
Will hand guards fit around my brake levers and cables?
The JFG and Acerbis guards leave plenty of room for cables and brake lines, and the WATODAY guards protect brake and clutch levers. The PRO CAKEN maker warns to check clearance for brake levers, throttle and dashboard before installation.
What are ATV hand guards made of?
Brackets and guard plates use different materials. The PRO CAKEN bracket is 6061 aluminum alloy, CNC forged, with a reinforced PP guard plate, and the JFG bracket is 6061 aluminum with a PP plastic shield. The WATODAY brackets are CNC billet aluminum with an anodized finish, the Acerbis guard uses an indexed steel bar-end insert, and the Wacece guards use PP plastic panels.
How do ATV hand guards install?
Mounting follows the bracket design. The PRO CAKEN guards insert into the handlebar end, and tightening expands the spacer inside the bar to lock the guard in place. The Wacece guards align the connecting bracket with the mounting space on the handlebar and tighten the screws, and the WATODAY brackets allow universal mounting on standard 7/8 in (22 mm) handlebars.
More mowing guides
- Best ATV Gloves (2026): 5 Picks for Trail Riding
- Best ATV Winch (2026): 5 Picks for ATVs and UTVs
- Best ATV Tires for All-Terrain (2026): 5 Picks by Size and Ply
- Best ATV Gas Can (2026): 4 Picks Compared
- Best ATV Plastic Restorer (2026): 5 Picks Compared
- Best ATV Snow Chains (2026): 4 Picks by Tire Size
- Best Atv Light Bar (2026): 5 Picks for Night Trails
- Best ATV Rack Bag (2026): 5 Picks for Trail Gear
- Best ATV Seat Cover (2026): 5 Picks Compared
- Best ATV Whip Lights (2026): 5 Picks for Night Trails
- Best Atv Oil (2026): 5 Picks for ATVs and UTVs
- Best ATV Battery for Cold Weather (2026): 4 Picks by CCA
- Best Trickle Charger for Atv Battery (2026): 5 Picks Compared
- ATV Spreader vs UTV Spreader: Which One Should You Buy?
- Synthetic vs Steel ATV Winch Rope: Which One Should You Buy?
- ATV vs UTV Snow Plow: Which One Should You Buy?
- Best Boom Sprayer for ATV (2026): 5 Picks Compared
- Best ATV Truck Ramps (2026): 5 Picks for Loading ATVs
- Best Tire Sealant for ATV (2026)
- Best Jack for Atv Mower (2026): 5 Lifts for Mower Work
See the ATV and property hub for more ATV gear guides.




