Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Extra Long Feeler Gauge (2026): 5 Picks for Mower Engines

Five extra long feeler gauge sets for mower engine work, compared by blade count, markings, reach, weight and warranty, with who should skip each.

Best Extra Long Feeler Gauge (2026): 5 Picks for Mower Engines
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1CRAFTSMAN CMMT14105Best OverallCRAFTSMAN CMMT141059.5/10View on Amazon
  2. 2Tigeen 2-Pack SetBest Two-Pack ValueTigeen 2-Pack Set9.5/10View on Amazon
  3. 3TUSK Tapered 32-BladeBest Tapered TipTUSK Tapered 32-Blade9.5/10View on Amazon
  4. 4HSLCGF 25-Blade LongBest Long ReachHSLCGF 25-Blade Long9.5/10View on Amazon
  5. 5Hotop 17-Blade MetricBest Metric OnlyHotop 17-Blade Metric9.3/10View on Amazon

A mower engine that runs rough or will not start cleanly often comes down to a gap measured in thin steel: the spark plug gap or the valve clearance. A feeler gauge slides into that gap and shows whether the clearance matches the figure in the engine manual. The best extra long feeler gauge extends past shrouds and brackets into tight engine bays without pulling the set apart, and the sets below compare blade counts, markings, reach, weight and warranty from each listing.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Quick picks

  • Best Overall CRAFTSMAN CMMT14105: 32 stainless-steel blades and the only stated warranty term here, a full lifetime warranty Check price on Amazon
  • Best Two-Pack Value Tigeen 2-Pack Set: Two 25-blade sets with dual markings for a spare on hand Check price on Amazon
  • Best Tapered Tip TUSK Tapered 32-Blade: Tapered 32-blade set with dual markings and 95 mm blades Check price on Amazon
  • Best Long Reach HSLCGF 25-Blade Long: Longest set here at 12.0 in with laser-engraved markings Check price on Amazon
  • Best Metric Only Hotop 17-Blade Metric: 17 etched metric sizes from 0.02 to 1.00 mm at 0.37 lb Check price on Amazon

Our acreage picks

CRAFTSMAN CMMT14105 32-Blade Feeler Gauge, 0.015 to 0.035 in

CRAFTSMAN CMMT14105 32-Blade Feeler Gauge, 0.015 to 0.035 in

CRAFTSMAN9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

32-blade feeler gauge set with stainless-steel blades, a 0.015 to 0.035 in range and a full lifetime warranty stated on the listing.

Who it's for: owners who want a compact set with a stated lifetime warranty.

Who should skip it: anyone who needs a range above 0.035 in.

The CMMT14105 is a 32-blade set with stainless-steel blades and a range of 0.015 to 0.035 in, with metric equivalents from 0.038 to 0.889 mm. The set measures 6.89 by 2.76 by 0.87 in, and the listing states a full lifetime warranty, the only stated warranty term here.

Pros

  • Full lifetime warranty stated on the listing
  • 32 stainless-steel blades
  • Compact 6.89 in set size
  • Metric equivalents stated alongside the inch range

Cons

  • Narrowest range here, 0.015 to 0.035 in
  • No weight is stated
  • No blade length is stated apart from the set size
  • No tapered tip is stated
Tigeen 25-Blade Long Feeler Gauge Set, 2-Pack

Tigeen 25-Blade Long Feeler Gauge Set, 2-Pack

Generic9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Two 25-blade long feeler gauge sets with metric and inch markings, 65 manganese steel blades and stainless steel shells, in a 0.038 to 1.02 mm range.

Who it's for: owners who want a spare set on hand and dual markings for spark plug gaps and valve work.

Who should skip it: anyone who wants a stated warranty term.

The package holds 2 stainless steel feeler gauge sets, each with 25 blades, foldable and portable. The metric range runs 0.038 to 1.02 mm and the inch range runs 0.0015 to 0.040 in. The blades are 65 manganese steel, the outer shell is stainless steel, and the package weighs 1.38 lb.

Pros

  • Two sets in the package, a spare on hand
  • Dual metric and inch markings, etched
  • 65 manganese steel blades with a stainless steel shell
  • Wide range, 0.038 to 1.02 mm

Cons

  • No warranty term is stated
  • No blade length is stated
  • Heaviest here at 1.38 lb for the pair
  • No tapered tip is stated
TUSK Tapered 32-Blade Feeler Gauge, 0.001 to 0.040 in

TUSK Tapered 32-Blade Feeler Gauge, 0.001 to 0.040 in

TUSK9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

32-blade tapered feeler gauge set with dual inch and metric markings and 95 mm blades for tight valve clearances.

Who it's for: owners checking valve clearances where a tapered tip helps.

Who should skip it: anyone who needs a stated warranty term or a stated weight.

The TUSK set holds 32 blades with tapered tips, marked in both inches from 0.001 to 0.040 and metric from 0.03 to 1.0 mm. The blades measure 95 mm in length, for reach into tight engine bays. The listing names quality steel without a grade. The spec table lists dimensions of 4.0 by 75.0 by 75.0 inches, which does not match the 95 mm blade length in the bullets; the bullets carry the weight here.

Pros

  • Tapered tips reach tight valve tappets
  • Dual inch and metric markings
  • 32 blades from 0.001 to 0.040 in
  • 95 mm blades give reach into tight engine bays

Cons

  • No warranty term is stated
  • No weight is stated
  • Steel grade is not named beyond quality steel
HSLCGF 25-Blade Long Feeler Gauge, 0.038 to 1.02 mm

HSLCGF 25-Blade Long Feeler Gauge, 0.038 to 1.02 mm

HSLCGF9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

25-blade long feeler gauge set with laser-engraved metric and inch markings, a 0.038 to 1.02 mm range and a 12.0 in set length.

Who it's for: owners who want the longest set here with clear laser-engraved markings.

Who should skip it: anyone who wants a stated warranty term or a stated weight.

The HSLCGF set holds 25 blades with laser-engraved metric and inch readings, a metric range of 0.038 to 1.02 mm and an inch range of 0.0015 to 0.040 in. The set measures 12.0 by 0.47 by 0.5 in, the longest here. The blades are heat treated.

Pros

  • Longest set here at 12.0 in
  • Laser-engraved markings, clear and easy to read
  • Heat-treated blades for hardness and wear resistance
  • Dual metric and inch scales

Cons

  • No warranty term is stated
  • No weight is stated
  • Single set, no spare
  • No tapered tip is stated
Hotop 17-Blade Metric Feeler Gauge, 0.02 to 1.00 mm

Hotop 17-Blade Metric Feeler Gauge, 0.02 to 1.00 mm

Hotop9.3/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

17-blade metric feeler gauge set covering 0.02 to 1.00 mm, foldable with etched numbers and a thumb notch.

Who it's for: owners who work in metric only and want a light, foldable set for spark plug gaps.

Who should skip it: anyone who needs inch markings or a stated warranty term.

The Hotop set holds 17 blades in metric sizes from 0.02 to 1.00 mm, with numbers etched into the blades and a thumb notch on the blade protector. The set weighs 0.37 lb. The listing names two materials: the title says stainless steel while the bullets say the blades are made of 65 manganese steel, with anti-rust oil on the blades. The material is not settled.

Pros

  • Lowest weight stated here at 0.37 lb
  • Etched metric numbers, easy to read
  • Foldable with a thumb notch on the blade protector
  • 17 sizes from 0.02 to 1.00 mm

Cons

  • Metric only, no inch markings
  • Fewest blades here at 17
  • Listing names two materials, 65 manganese steel and stainless steel
  • No warranty term is stated

Side-by-side specs

Model Acre Score Blades Range Markings Length Weight Warranty
CRAFTSMAN CMMT14105 9.5/10 32 0.015 to 0.035 in Inch and metric 6.89 in Not stated Full Lifetime Warranty
Tigeen 2-Pack Set 9.5/10 25 per set 0.038 to 1.02 mm Metric and inch Not stated 1.38 lb Not stated
TUSK Tapered 32-Blade 9.5/10 32 0.001 to 0.040 in Inch and metric 95 mm Not stated Not stated
HSLCGF 25-Blade Long 9.5/10 25 0.038 to 1.02 mm Metric and inch 12.0 in Not stated Not stated
Hotop 17-Blade Metric 9.3/10 17 0.02 to 1.00 mm Metric only Not stated 0.37 lb Not stated

These figures are rated by the manufacturer and shown as listed, on 3 November 2026.

Acreage and terrain fit

CRAFTSMAN CMMT14105

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatHillsRough groundTrees and beds

Tigeen 2-Pack Set

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatHillsRough groundTrees and beds

TUSK Tapered 32-Blade

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatHillsRough groundTrees and beds

HSLCGF 25-Blade Long

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatHillsRough groundTrees and beds

Hotop 17-Blade Metric

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatHillsRough groundTrees and beds

How the picks were scored

The Acre Score weighs five factors: performance (blade count, range and reach), build quality (material, markings and construction), value (specs for the money), safety (operator controls where stated) and warranty (term and coverage). A factor the listing does not state scores zero.

Product Acre Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
CRAFTSMAN CMMT14105 9.5 29 21 20 0 4
Tigeen 2-Pack Set 9.5 30 21 22 0 0
TUSK Tapered 32-Blade 9.5 30 21 21 0 0
HSLCGF 25-Blade Long 9.5 30 21 20 0 0
Hotop 17-Blade Metric 9.3 26 18 19 0 0

Acre Scores are spread from 9.2 up to 9.8, and each weighted total takes its place on that spread proportionally, so the mower with more points is always shown above the one with fewer.

Buying guide: the best extra long feeler gauge

Long reach and blade length

Reach is the point of this roundup. The HSLCGF set measures 12.0 in long, the TUSK blades measure 95 mm, and the CRAFTSMAN set measures 6.89 in. The 2-pack and the Hotop set do not state a length. A longer set gets past brackets and shrouds on riding mower engines. See the mower maintenance hub for more engine upkeep guides.

Metric, inch or dual markings

Three sets carry both metric and inch markings: the TUSK, the 2-pack and the HSLCGF. The CRAFTSMAN set marks blades in inches with metric equivalents from 0.038 to 0.889 mm. The Hotop set is metric only, 0.02 to 1.00 mm, with numbers etched into the blades. For a shorter set, see the feeler gauge set roundup.

Blade count and range

Blade counts run from 17 on the Hotop set to 32 on the TUSK and CRAFTSMAN sets, with 25 blades on the 2-pack and the HSLCGF set. The widest ranges here are 0.038 to 1.02 mm on the 2-pack and the HSLCGF set, and 0.001 to 0.040 in on the TUSK set. The CRAFTSMAN range is the narrowest, 0.015 to 0.035 in.

Material and corrosion

The CRAFTSMAN blades are stainless steel, and the 2-pack pairs 65 manganese steel blades with a stainless steel shell. The HSLCGF blades are heat treated with a polished shell. The TUSK listing names quality steel without a grade. The Hotop listing names two materials, 65 manganese steel in the bullets and stainless steel in the title, so the material is not settled.

Warranty

Only the CRAFTSMAN listing states a warranty term, a full lifetime warranty. The other four listings state no warranty term.

Mowing safety

Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.

Matching It to Your Property

  • Foldable sets store flat in a toolbox, and the 2-pack keeps a spare set on hand.
  • Long sets suit riding mower engines with shrouds and brackets in the way.
  • Stainless blades suit damp storage, where rust shows first on bare steel.

FAQ: mowing large lots

What is a feeler gauge used for on a mower engine?

A feeler gauge measures small gaps on a mower engine, such as the spark plug gap and the valve clearance. The blade slides into the gap, and the marked size shows the clearance.

What size range should an extra long feeler gauge cover?

The sets here cover 0.02 to 1.00 mm on the Hotop set, 0.038 to 1.02 mm on the 2-pack and the HSLCGF set, and 0.001 to 0.040 in on the TUSK set.

Metric or inch markings for mower work?

Dual-marked sets cover both. The TUSK, the 2-pack and the HSLCGF sets carry metric and inch markings, the CRAFTSMAN set marks inches with metric equivalents, and the Hotop set is metric only.

How should a feeler gauge set be stored?

The sets here fold closed, and the Hotop and 2-pack listings note a finger nut that lets a single blade come out while the rest stay together.

More mowing guides

More buying guides

Mower Maintenance ·

Best Feeler Gauge for Lawn Mower (2026)

Five feeler gauge sets for lawn mower valve and spark plug gaps, compared by blade count, thickness range and markings, with the two-piece kits…