Best Offset Feeler Gauge Set (2026): 5 Sets Compared
Five offset feeler gauge sets, from 11 blades to 26, compared by thickness range, handles, materials and warranty for valve lash and spark plug gaps.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOEMTOOLS 253499.6/10View on Amazon - 2
Best 16-Blade SetLANBEAUTIFY 16-Blade9.5/10View on Amazon - 3
Best Two-Handle Setyourour A3089.5/10View on Amazon - 4
Most BladesLang Tools 3275A9.5/10View on Amazon - 5
Best 11-Blade SetBonbo A3089.4/10View on Amazon
A mower that runs rough after a season of cutting often points at a gap that drifted: a spark plug gap or a valve lash that no longer matches the manual. The best offset feeler gauge set gives a thin blade for each gap, bent at the tip so it reaches past a shroud or a valve cover. The five sets below differ in blade count, thickness range, handles and warranty, with the figures from each listing, and gaps are marked where a listing does not state them.
AcreMowerLab earns a commission when you shop through links here. It never changes your price.
Quick picks
- Best Overall OEMTOOLS 25349: Highest Acre Score here: 16 blades with a lifetime warranty Check price on Amazon
- Best 16-Blade Set LANBEAUTIFY 16-Blade: Tapered stainless blades with a 12-month warranty Check price on Amazon
- Best Two-Handle Set yourour A308: Two rubber handles with a 1-year warranty Check price on Amazon
- Most Blades Lang Tools 3275A: 26 blades from .005 to .030 with a locking nut Check price on Amazon
- Best 11-Blade Set Bonbo A308: Offset blades for valve lash at 0.004 to 0.014 inches Check price on Amazon
Our acreage picks

OEMTOOLS 25349 Offset Feeler Gauge, 16-Blade, 0.005 to 0.020 in
16-blade offset feeler gauge, 0.005 to 0.020 inches (0.127 to 0.508 mm), hardened steel blades, etched markings, lifetime warranty.
Who it's for: owners who want a 16-blade set with a lifetime warranty for spark plug and engine work.
Who should skip it: anyone who needs blades thicker than 0.020 inches.
The OEMTOOLS 25349 is a 16-blade offset feeler gauge measuring 0.005 to 0.020 inches (0.127 to 0.508 mm), with hardened steel blades, etched SAE and metric markings and a built-in thumb notch for quick blade selection. The listing states S-2 steel and a 2 piece design; the spec table lists 0.15 lb and 6.2 x 2.7 x 0.1 inches. One odd line: a bullet fragment mentions a chamfered drive end for quick attachment, which does not match a feeler gauge. The warranty is OEMTOOLS Limited Lifetime.
Pros
- 16 blades covering 0.005 to 0.020 in
- Etched SAE and metric markings on each blade
- Thumb notch for quick blade selection
- Limited lifetime warranty stated
Cons
- No handles are stated
- Narrower range than the 26-blade Lang set
- One bullet fragment mentions a chamfered drive end
- No safety feature is stated

LANBEAUTIFY 16-Blade Offset Feeler Gauge, 0.005 to 0.020 in
16-blade offset feeler gauge in stainless steel, dual marked metric and SAE, 0.005 to 0.020 inches, with a 12-month warranty.
Who it's for: owners who want a 16-blade tapered set for spark plug and tappet work.
Who should skip it: anyone who needs stated weight and dimensions before ordering.
The LANBEAUTIFY set has 16 stainless steel blades with a tapered profile for access into tight places, marked with both metric and SAE sizing from 0.005 to 0.020 inches (0.127 to 0.508 mm). The gauges measure tappet clearances, spark plug gaps, bearing clearances and piston ring gaps, and the set folds neatly into itself for transport and storage. The warranty is 60-day money-back and 12-month. No weight or dimensions are stated.
Pros
- 16 blades covering 0.005 to 0.020 in
- Tapered profile for tight places
- Each blade marked metric and SAE
- 12-month warranty with 60-day money-back
Cons
- No weight is stated
- No dimensions are stated
- No handles are stated
- No safety feature is stated

yourour A308 Offset Valve Tappet Gauge Set, 11-Blade
11-blade offset valve tappet gauge set with two steel and rubber handles, 0.004 to 0.014 inches, 1-year warranty.
Who it's for: owners adjusting valve lash who want two handles and a 1-year warranty.
Who should skip it: anyone who needs blades thicker than 0.014 inches.
The yourour A308 is an 11-blade offset valve tappet gauge set with two handles made of steel and rubber, measuring 0.004 to 0.014 inches (.102 to 0.356 mm). The set is designed for setting valve tappets and valve lash adjustment, with dual metric and imperial markings engraved on each blade. Dimensions are 3.93 x 0.36 x 0.32 inches, and the warranty is 1 year with a 30-day money-back guarantee. The blade sizes match the Bonbo A308 listing exactly.
Pros
- Two steel and rubber handles
- 11 blades from 0.004 to 0.014 in
- Dual metric and imperial markings engraved
- 1-year warranty with 30-day money-back
Cons
- Narrowest range here at 0.004 to 0.014 in
- Same A308 blade set as the Bonbo listing
- No weight is stated
- No safety feature is stated

Lang Tools 3275A Offset Feeler Gauge Set, 26-Blade
26-blade offset feeler gauge set, 4 inch blades from .005 to .030, knurled lock-nut, 1 inch 45 degree offset.
Who it's for: owners who want the most blades and the widest range here for valve work.
Who should skip it: anyone who wants a stated warranty term.
The Lang Tools 3275A has 26 blades, 4 inches long and 1/2 inch wide, with thicknesses from .005 to .030. The blades are tempered 1095 spring steel with a knurled lock-nut that locks the chosen blade into the working position, and the 4 inch blades have a 1 inch 45 degree offset for checking valve clearances. Sizes in decimal and metric equivalent are permanently etched on each blade; the listing states Made in the U.S.A. No warranty term, weight or overall dimensions are stated.
Pros
- 26 blades, the most here
- Widest range here, .005 to .030
- Knurled lock-nut locks a blade in position
- Sizes permanently etched, decimal and metric
Cons
- No warranty term is stated
- No weight is stated
- No dimensions are stated beyond blade size
- No safety feature is stated

Bonbo A308 Offset Valve Tappet Gauge Set, 11-Blade
11-blade offset valve tappet gauge set, 0.004 to 0.014 inches, two handles, oil-coated hardened steel blades.
Who it's for: owners checking valve lash who want offset blades and two handles.
Who should skip it: anyone who wants a stated warranty term or blades thicker than 0.014 inches.
The Bonbo A308 is an 11-blade offset valve tappet gauge set measuring 0.004 to 0.014 inches (.102 to 0.356 mm), designed for checking and adjusting valve clearance. The offset blades reach tight spaces around valve train components, each blade is engraved with metric and imperial measurements, and the foldable design with two handles keeps the blades organized. The blades are hardened and tempered steel coated with protective oil to resist rust and corrosion. One contradiction: the spec table lists NumberOfItems as 3 while the title and bullets state an 11-blade set, so trust the title and bullets.
Pros
- Offset blades for hard-to-reach valve areas
- Two handles for a secure grip
- Blades engraved metric and imperial
- Oil-coated blades resist rust and corrosion
Cons
- No warranty term is stated
- Narrowest range here at 0.004 to 0.014 in
- Same A308 blade set as the yourour listing
- No weight is stated
Side-by-side specs
| Model | Acre Score | Blades | Range (in) | Range (mm) | Handles | Warranty |
|---|---|---|---|---|---|---|
| OEMTOOLS 25349 | 9.6/10 | 16 | 0.005-0.020 | 0.127-0.508 | Not stated | Limited Lifetime |
| LANBEAUTIFY 16-Blade | 9.5/10 | 16 | 0.005-0.020 | 0.127-0.508 | Not stated | 12-month |
| yourour A308 | 9.5/10 | 11 | 0.004-0.014 | .102-0.356 | Two | 1 Year |
| Lang Tools 3275A | 9.5/10 | 26 | 0.005-.030 | Not stated | Not stated | Not stated |
| Bonbo A308 | 9.4/10 | 11 | 0.004-0.014 | .102-0.356 | Two | Not stated |
Every figure repeats what the brand’s listing states (3 November 2026).
Acreage and terrain fit
OEMTOOLS 25349
LANBEAUTIFY 16-Blade
yourour A308
Lang Tools 3275A
Bonbo A308
What the listings tell you
Five feeler gauge listings were compared. Two list 16 blades and two list 11 blades; one lists 26. Three list a range starting at 0.005 inches; two start at 0.004 inches. Three state a warranty term: one lifetime, one 1 year and one 12 months.
Buying guide: choosing the best offset feeler gauge set
Blade count and thickness range
Blade count runs from 11 to 26. The Lang set has 26 blades from .005 to .030, the widest range here. The OEMTOOLS and LANBEAUTIFY sets have 16 blades from 0.005 to 0.020 inches, and the Bonbo and yourour sets have 11 blades from 0.004 to 0.014 inches. A wider range covers more gaps with one set.
Offset blades and handles
All five sets use offset blades. The Bonbo and yourour listings state the offset design reaches tight spaces around valve train components, and both have two handles. The OEMTOOLS set has a built-in thumb notch for quick blade selection, and the Lang set has a knurled lock-nut that locks the chosen blade into position. The LANBEAUTIFY set folds neatly into itself for transport and storage.
Valve lash and spark plug gaps
The Bonbo and yourour sets are made for valve lash: checking and adjusting valve clearance for intake and exhaust valves. The OEMTOOLS set lists spark plug adjustments and engine maintenance, and the LANBEAUTIFY set lists spark plug gaps, tappet clearances, bearing clearances and piston ring gaps. For plug work, see the best spark plug for Briggs and Stratton picks and how to check a spark plug.
Materials and markings
Blade steel differs. The OEMTOOLS blades are hardened steel, and the listing also states S-2 steel. The Bonbo blades are hardened and tempered steel coated with protective oil, the Lang blades are tempered 1095 spring steel, and the LANBEAUTIFY blades are stainless steel. Every listing states markings on each blade: etched or engraved SAE and metric sizes, and dual metric and SAE marking on the LANBEAUTIFY set.
Warranty
Three listings state a warranty term. The OEMTOOLS set states OEMTOOLS Limited Lifetime, the yourour set states a 1-year warranty with a 30-day money-back guarantee, and the LANBEAUTIFY set states a 60-day money-back and 12-month warranty. The Bonbo and Lang listings state no warranty term.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- The OEMTOOLS set measures 6.2 x 2.7 x 0.1 inches and weighs 0.15 lb, so it fits a small toolbox drawer.
- The Bonbo set measures 4.0 x 1.0 x 1.0 inches and folds, so it stores in a small toolbox space.
- The yourour set measures 3.93 x 0.36 x 0.32 inches and folds, so it stores in a small toolbox space.
- The Lang lock-nut retains the blades not in use firmly to the handle, so it stays together in storage.
- The LANBEAUTIFY set folds neatly into itself for easy transportation and storage.
The Acre Score explained
The Acre Score weighs performance (blade count, thickness range and what each set can measure), build quality (blade steel and handles), value, safety (stated safety features) and warranty (stated term and coverage). A factor the listing does not state scores zero. Three listings state a warranty term; no listing here states a safety feature.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OEMTOOLS 25349 | 9.6 | 30 | 21 | 20 | 0 | 4 |
| LANBEAUTIFY 16-Blade | 9.5 | 29 | 20 | 20 | 0 | 3 |
| yourour A308 | 9.5 | 28 | 20 | 20 | 0 | 3 |
| Lang Tools 3275A | 9.5 | 33 | 22 | 21 | 0 | 0 |
| Bonbo A308 | 9.4 | 28 | 20 | 19 | 0 | 0 |
We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower.
FAQ: mowing large lots
What is a feeler gauge?
A feeler gauge is a set of thin blades, each marked with a thickness, for measuring gap widths. The listings here describe measuring valve clearance, spark plug gaps, tappet clearances, bearing clearances and piston ring gaps.
What does a feeler gauge measure?
The listings describe measuring gap widths: valve clearance between the valve stem and tappet, spark plug gaps, tappet clearances, bearing clearances and piston ring gaps.
How to read a feeler gauge?
Read the size marked on the blade. The listings state etched or engraved SAE and metric markings, and the LANBEAUTIFY listing states each blade is marked with both metric and SAE sizing.
How to use a feeler gauge for spark plugs?
The OEMTOOLS listing describes measuring spark plug gaps with blades from 0.005 to 0.020 inches, and the LANBEAUTIFY listing lists spark plug gaps among the gaps its blades measure. Choose the blade marked with the gap size and check the fit.
More mowing guides
- Best Feeler Gauge Set (2026): 5 Picks for the Shop
- Best Extra Long Feeler Gauge (2026): 5 Picks for Mower Engines
- Best Feeler Gauge for Lawn Mower (2026)
- Best Feeler Gauge for Lawn Mower Under $12 (2026): 5 Picks
- Best Spark Plug for Briggs and Stratton (2026): 5 Plugs Compared
- Best Spark Plug Socket for Tight Spaces (2026): 4 Picks
- How to Check Spark Plug on a Lawn Mower
- Spark Plug Problems: Signs and Fixes
- Types of Spark Plugs for Lawn Mowers
- Best Mower Maintenance Kit for Beginners (2026): 5 Kits Compared
- Riding Mower Maintenance: Step-by-Step Care Guide
- Lawn Tractor Maintenance: Step-by-Step Care Guide




