Best Skid Shoes (2026): 5 Picks for Snowblowers and Plows
5 snowblower and plow skid shoes in steel and polymer, compared by fit, size, material and pack, with mounting hardware and adjustable height where stated.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCanamax 731-064399.7/10View on Amazon - 2
Best Fit CoverageFerilter 726003009.6/10View on Amazon - 3
Best AdjustableRGQSUN Plow Skid Shoes9.6/10View on Amazon - 4
Best for TractorsTractor Bucket Shoes9.4/10View on Amazon - 5
Best ValueHUSWELL Polymer Shoes9.5/10View on Amazon
A snowblower that scrapes the driveway wears its housing down and leaves bare strips on gravel and concrete. Skid shoes are the small plates that set how high the housing rides, and the best skid shoes keep the housing off the ground while the auger clears the snow. The picks below cover snowblower slide shoes and plow shoes, in steel and polymer.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall Canamax 731-06439: Highest Acre Score here: reversible polyurethane shoe, precise fit sizes and stated cold use down to 30 degrees below zero Check price on Amazon
- Best Fit Coverage Ferilter 72600300: Fits Ariens, John Deere and MTD machines with a mounting hardware kit in the pack Check price on Amazon
- Best Adjustable RGQSUN Plow Skid Shoes: Steel shoe with gaskets, rubber rings and a pin to set the position on a 5/8 in shaft Check price on Amazon
- Best for Tractors Tractor Bucket Shoes: Steel bolt-on bucket edge for compact and farm tractors, no welding Check price on Amazon
- Best Value HUSWELL Polymer Shoes: Polymer shoe with the same Ariens, John Deere and MTD fit list as the Ferilter Check price on Amazon
Our acreage picks

Canamax 731-06439 Snowblower Skid Shoes, Polyurethane
Reversible polyurethane skid shoe set with stated sizes and a 2.81 in bolt center, for cold use down to 30 degrees below zero.
Who it's for: owners of MTD, Craftsman, Troy-Bilt, Cub Cadet and Yard-Man snow throwers who want a reversible shoe.
Who should skip it: anyone who needs a steel shoe or a stated warranty term.
The Canamax 731-06439 is a reversible polyurethane skid shoe set for MTD, Craftsman, Troy-Bilt, Cub Cadet and Yard-Man snow throwers. The listing states a width of 3.75 in, a length of 5.19 in, a thickness of 0.720 in, a center to center of 2.81 in and a cold use down to 30 degrees below zero. The spec table lists a third dimension that does not match the 0.720 in thickness in the bullets; the bullets give the stated thickness. No warranty term is stated.
Pros
- Reversible polyurethane shoe with two sides for longer use
- Stated sizes: 3.75 in wide, 5.19 in long, 0.720 in thick
- Durable in cold down to 30 degrees below zero
- Fits MTD, Craftsman, Troy-Bilt, Cub Cadet and Yard-Man
Cons
- No warranty term is stated
- No mounting hardware is listed with the set
- Polyurethane only; no steel shoe in this listing

Ferilter 72600300 Skid Shoes for Ariens Snow Blowers
Polymer skid shoe for Ariens, John Deere and MTD snow blowers, with 3 in bolt centers and a hardware kit.
Who it's for: owners of Ariens, John Deere and MTD snow blowers who want a polymer shoe with hardware in the pack.
Who should skip it: anyone who needs a steel shoe.
The Ferilter 72600300 is a polymer skid shoe for Ariens snow blowers, including ST524, ST724 and ST824, and for John Deere and MTD machines by part number. Bolt centers are 3 in, the slot is 1-3/4 in long and 7/16 in in diameter, and the pack holds 2 skid shoes and a hardware kit. The listing describes the shoes as non-abrasive, strong and wearable. Weight and warranty term are not stated.
Pros
- Fits Ariens, John Deere, MTD and Stens machines by part number
- Mounting hardware kit included in the pack
- Non-abrasive polymer shoe, described as strong and wearable
- Two shoes and a hardware kit in the pack
Cons
- No warranty term is stated
- No size beyond bolt centers and slot is stated
- Weight is not stated
- Polymer only; no steel option in this listing

RGQSUN 2PCS Snow Plow Skid Shoes, 5/8 in Shaft
Steel snow plow skid shoe for ATV and UTV moose blades, adjustable on a 5/8 in shaft.
Who it's for: owners of ATV and UTV plows with a 5/8 in shaft who want a steel shoe they can adjust.
Who should skip it: anyone whose plow shaft is not 5/8 in.
The RGQSUN shoe is a 40cr steel snow plow skid shoe for ATV and UTV moose blades with a 5/8 in shaft. Total height is about 7 in, the base is 3 in across and 0.7 in thick, and each set comes with 7 gaskets, 2 rubber rings and 1 pin. Weight and warranty term are not stated.
Pros
- 40cr steel, described as wear resistant in low temperature use
- Adjustable position with 7 gaskets, 2 rubber rings and 1 pin per set
- Fits ATV and UTV moose blades with a 5/8 in shaft
- Base is 3 in across and 0.7 in thick, about 7 in tall
Cons
- No warranty term is stated
- The listing does not state a weight
- Shaft size is limited to 5/8 in
- Steel shoe; no polymer option in this listing

HUSWELL Polymer Snow Blower Skid Shoes for Ariens
Polymer snow blower skid shoe for Ariens, John Deere and MTD machines, with 3 in bolt centers.
Who it's for: owners of Ariens, John Deere and MTD snow blowers who want a polymer shoe with a stated weight.
Who should skip it: anyone who wants a hardware kit in the pack.
The HUSWELL shoe is a polymer snow blower skid shoe with the same fit list as the Ferilter: Ariens part numbers 00837900, 01016500, 02459951, 02483851, 02483859 and 72600300, John Deere M124413 and M144012, MTD 05002 and Stens 780-286. Bolt centers are 3 in, the slot is 1-3/4 in long and 7/16 in in diameter, and the stated weight is 1.61 lb. The spec table lists NumberOfItems 1 while the title reads as a pair. No mounting hardware kit or warranty term is listed.
Pros
- Same Ariens, John Deere, MTD and Stens fit list as the Ferilter
- Polymer shoe with 3 in bolt centers and a 1-3/4 in slot
- Weight stated at 1.61 lb
- Fits Ariens ST524, ST724 and ST824 snow blowers
Cons
- No warranty term is stated
- No mounting hardware kit is listed
- No size beyond bolt centers and slot is stated

Tractor Bucket Protector Skid Shoes, Orange
Steel bolt-on skid shoe for a tractor bucket, with a smooth edge for concrete, asphalt and turf.
Who it's for: owners of compact and farm tractors who want a bolt-on bucket edge for snow and gravel work.
Who should skip it: anyone who needs a stated size.
The Tractor Bucket Protector is a steel skid shoe for a tractor bucket, with a bolt-on install that needs no welding or special tools. The listing describes it as protecting the bucket from wear while handling snow, gravel and dirt, with a smooth edge for concrete, asphalt and turf. Color is orange, model TBPUS025, and the listing states no size, weight or warranty term.
Pros
- Steel bucket edge protector for compact and farm tractors
- Bolt-on install with no welding or special tools
- Smooth edge protects concrete, asphalt and turf
- Works for snow, gravel and dirt, year round
Cons
- No warranty term is stated
- No size is stated
- No weight is stated
- No named tractor models are stated, only most compact and farm tractors
Other machines to compare
490-241-0010 Snow Thrower Skid ShoesCheck price on Amazon
Zonon Snow Blower Skid Shoes for 42Check price on Amazon
Universal Snow Blower Skid Shoes for Heavy DutyCheck price on Amazon
CheeMuii 2Pack Red Snowblower Skid Shoes Replace for 784-5580Check price on Amazon
CheeMuii 2Pack Black Snowblower Skid Shoes for 784-5580Check price on Amazon
Side-by-side specs
| Model | Acre Score | Type | Size | Material | Pack | Warranty |
|---|---|---|---|---|---|---|
| Canamax 731-06439 | 9.7/10 | Polyurethane skid shoe | 3.75 x 5.19 in | Polyurethane | Set of 2 | Not stated |
| Ferilter 72600300 | 9.6/10 | Polymer skid shoe | 3 in centers | Polymer | 2 shoes, hardware kit | Not stated |
| RGQSUN Plow Skid Shoes | 9.6/10 | Steel plow skid shoe | 7 in tall, 3 in base | 40cr steel | 2 sets | Not stated |
| HUSWELL Polymer Shoes | 9.5/10 | Polymer skid shoe | 3 in centers | Polymer | Not stated | Not stated |
| Tractor Bucket Shoes | 9.4/10 | Steel bucket protector | Not stated | Steel | Not stated | Not stated |
Every figure repeats what the brand’s listing states (11 November 2026).
Acreage and terrain fit
Canamax 731-06439
Ferilter 72600300
RGQSUN Plow Skid Shoes
HUSWELL Polymer Shoes
Tractor Bucket Shoes
Buying guide: best skid shoes
What skid shoes do on a snowblower
A skid shoe is an adjustable spacer that controls the height of the snowblower above the ground. The Canamax listing describes it as protecting the auger blades from friction damage and keeping driveways from scrapes. A reversible shoe like the Canamax can be flipped for longer use.
Polymer vs steel
The polymer picks are the Ferilter, the HUSWELL and the Canamax. The Ferilter listing describes its polymer shoes as non-abrasive, strong and wearable, and the Canamax polyurethane shoe is listed as durable in cold temperatures down to 30 degrees below zero. The RGQSUN shoe is 40cr steel, described as able to withstand low temperature use and resist wear. Polymer suits a driveway you want to keep unmarked; steel suits a plow blade and a bucket edge.
Measuring the fit
Measure the bolt centers and slot on the shoe you are replacing before ordering. The Ferilter and HUSWELL listings state a center to center of 3 in, a slot length of 1-3/4 in and a slot diameter of 7/16 in. The Canamax listing states a center to center of 2.81 in and a slot diameter of 0.35 in. A shoe with the wrong centers will not bolt on.
Adjusting the height
The RGQSUN shoe adjusts with 7 gaskets, 2 rubber rings and 1 pin, so the position can be set to the plow. The Canamax shoe is reversible, with two sides that can be flipped up and down for longer use. The Ferilter and HUSWELL shoes use a slot to set the height.
Plow shoes vs snowblower shoes
A plow shoe and a snowblower shoe do the same job on different machines. The RGQSUN shoe fits ATV and UTV moose blades with a 5/8 in shaft, and the tractor bucket shoe fits most compact and farm tractors with a bolt-on install. The Ferilter, HUSWELL and Canamax shoes are made for snowblower housings, with bolt centers and slots to match named part numbers. For the machine itself, see the riding mowers hub.
Stay within the towing capacity and hitch weight your mower manual lists, and add weight slowly. Loaded carts and spreaders push a mower downhill, so take slopes straight up and down at low speed. Keep riders off carts and keep bystanders clear while you tow. Read our Safety Disclaimer.
Matching It to Your Property
- Gravel driveway: the Canamax shoe keeps driveways from scrapes, and the Ferilter shoe is non-abrasive.
- ATV or UTV plow: the RGQSUN shoe fits moose blades with a 5/8 in shaft.
- Tractor work: the bucket shoe bolts on to most compact and farm tractors with no welding.
- Longer wear: the Canamax shoe is reversible, with two sides to flip.
The Acre Score explained
The Acre Score weighs performance (fit, size and what the shoe is made for), build quality, value, safety and warranty. A factor the listing does not state scores zero.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Canamax 731-06439 | 9.7 | 32 | 21 | 21 | n/a | 0 |
| Ferilter 72600300 | 9.6 | 30 | 20 | 21 | n/a | 0 |
| RGQSUN Plow Skid Shoes | 9.6 | 29 | 21 | 20 | n/a | 0 |
| HUSWELL Polymer Shoes | 9.5 | 29 | 20 | 19 | n/a | 0 |
| Tractor Bucket Shoes | 9.4 | 26 | 19 | 18 | n/a | 0 |
We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower. If an item uses no power and names no safety feature, safety is dropped and the scale becomes 90 points.
FAQ: mowing large lots
What are skid shoes on a snowblower?
Skid shoes are the plates that bolt to the snowblower housing and set how high it rides above the ground, protecting the auger blades from friction damage and keeping driveways from scrapes.
Can Am plow skid shoes fit an ATV plow?
The RGQSUN listing states fit for ATV and UTV moose blades with a 5/8 in shaft. Measure the shaft on the plow before ordering.
Do I need skid shoes on my plow?
A plow without skid shoes lets the blade ride on the surface and scrape the driveway. The RGQSUN listing describes the shoe as protecting the connection between the metal parts and the plow body.
How do I know if skid shoes fit my snowblower?
Measure the bolt centers and slot on the shoe you are replacing, then match them to the listing. The Ferilter and HUSWELL listings state 3 in centers with a 1-3/4 in slot, while the Canamax listing states 2.81 in centers with a 2.16 in slot.
More mowing guides
- Best Snow Blower (2026): 5 Electric Picks for Drives and Walks
- Best Snow Blower for Gravel Driveway (2026): 5 Compared
- Best Cordless Snow Blower (2026): 5 Picks for Driveways
- Best Auger Belt for Snow Blower (2026): 5 Picks That Fit
- Best Shear Pins for Snow Blower (2026)
- ATV vs UTV Snow Plow: Which One Should You Buy?
- Auger vs Impeller Snow Blower: Which One Should You Buy?
- 21 vs 24 Inch Snow Blower: Which One Should You Buy?
- Best Skid Shoes for Snow Blower Under $20 (2026)
- Best Rubber Snow Edge for Tractor Bucket (2026)




