Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Brush Hog PTO Shaft Parts: How to Choose One

A guide to brush hog PTO shaft parts: what each piece does, how to match length and ends, and how to read power ratings.

Brush Hog PTO Shaft Parts: How to Choose One
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR PTO Shaft 1-3/8 in 6 Spline Both Ends Series 5 with Slip Clutch, 43-57 inVEVOR PTO Shaft 1-3/8 in 6 Spline Both Ends Series 5 with Slip Clutch, 43-57 in9.7/10View on Amazon
  2. 2VEVOR PTO Shaft 1-3/8 in 6 Spline Round End Series 4, 39-55 inVEVOR PTO Shaft 1-3/8 in 6 Spline Round End Series 4, 39-55 in9.6/10View on Amazon
  3. 3ACZCR PTO Shaft 1-3/8 in 6 Splines Both Ends Series 4, 48-80.5 inACZCR PTO Shaft 1-3/8 in 6 Splines Both Ends Series 4, 48-80.5 in9.6/10View on Amazon
  4. 4SCITOO PTO Shaft 1-3/8 in 6 Splines Round End Series 4, 39-63 inSCITOO PTO Shaft 1-3/8 in 6 Splines Round End Series 4, 39-63 in9.6/10View on Amazon

The brush hog pto shaft parts that carry power from the tractor to the cutter are the telescoping tube, the universal joints, the yokes, the shield and, on some shafts, a slip clutch. When the cutter stops turning or will not stay connected, a worn part or the wrong size for the tractor is usually the cause. This guide explains each part and how to match length, ends and power ratings.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

VEVOR PTO Shaft 1-3/8 in 6 Spline Both Ends Series 5 with Slip Clutch, 43-57 in

VEVOR PTO Shaft 1-3/8 in 6 Spline Both Ends Series 5 with Slip Clutch, 43-57 in

VEVOR9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A Series 5 shaft with a slip clutch, 6-spline ends on both sides and the highest ratings here.

Who it's for: owners who need a Series 5 shaft with slip clutch protection and the highest ratings here.

Who should skip it: anyone who needs a Series 4 shaft or a reach past 57 in.

VEVOR lists a Series 5 PTO shaft with a slip clutch, 1-3/8 in 6-spline ends on both sides, and CE certification. Compressed length is 43 in and extended length is 57 in. The maker states 47 Hp, 35 Kw and 620 Nm at 540 rpm, and 77 Hp, 55 Kw and 500 Nm at 1000 rpm.

Pros

  • Slip clutch guards against shock loads
  • Highest ratings here: 47 Hp at 540 rpm, 77 Hp at 1000 rpm
  • 6-spline ends on both sides, 1-3/8 in
  • CE certification, safety chain and plastic shield

Cons

  • No warranty term is stated
  • 43-57 in range is not the longest here
  • Same size and type only, per the listing
  • No compressed length in millimetres is stated
VEVOR PTO Shaft 1-3/8 in 6 Spline Round End Series 4, 39-55 in

VEVOR PTO Shaft 1-3/8 in 6 Spline Round End Series 4, 39-55 in

VEVOR9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A Series 4 shaft with a 6-spline tractor end, a round implement end and CE certification, 39-55 in.

Who it's for: owners who need a Series 4 shaft with a round implement end and a mid-length reach.

Who should skip it: anyone who needs a slip clutch or 6-spline ends.

VEVOR lists a Series 4 PTO shaft with a 6-spline tractor end and a round implement end, both 1-3/8 in, with CE certification. Compressed length is 39 in (1000 mm) and extended length is 55 in (1400 mm). The maker states 35 Hp, 26 Kw and 460 Nm at 540 rpm, and 53 Hp, 39 Kw and 360 Nm at 1000 rpm.

Pros

  • CE certification stated
  • 6-spline tractor end, round implement end, 1-3/8 in
  • 35 Hp at 540 rpm and 53 Hp at 1000 rpm
  • Safety chain and shield included

Cons

  • No warranty term is stated
  • No slip clutch, unlike the Series 5 here
  • 55 in extended length is not the longest here
  • Round end fits only a matching round fitting
ACZCR PTO Shaft 1-3/8 in 6 Splines Both Ends Series 4, 48-80.5 in

ACZCR PTO Shaft 1-3/8 in 6 Splines Both Ends Series 4, 48-80.5 in

ACZCR9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A Series 4 shaft with the longest reach here, 48-80.5 in, and 6-spline ends.

Who it's for: owners with a long gap between tractor and cutter who need 6-spline ends on both sides.

Who should skip it: anyone who needs a slip clutch or a length under 48 in.

ACZCR lists a Series 4 PTO shaft with 6-spline ends on both sides, both 1-3/8 in, without a slip clutch. Compressed length is 48 in (1230 mm) and extended length is 80.5 in (2055 mm), the longest reach here. The maker states 35 Hp, 26 Kw and 460 Nm at 540 rpm, and 55 Hp, 40 Kw and 380 Nm at 1000 rpm.

Pros

  • Longest reach here: 48 to 80.5 in
  • 6-spline ends on both sides, 1-3/8 in
  • 35 Hp at 540 rpm and 55 Hp at 1000 rpm
  • 20CrMnTi carburized steel joint and Q345 steel tube

Cons

  • No warranty term is stated
  • No slip clutch is included
  • No CE certification is stated
  • Buyers must check the compatibility chart first
SCITOO PTO Shaft 1-3/8 in 6 Splines Round End Series 4, 39-63 in

SCITOO PTO Shaft 1-3/8 in 6 Splines Round End Series 4, 39-63 in

SCITOO9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A Series 4 shaft with a 6-spline tractor end, a round implement end, 39-63 in.

Who it's for: owners who need a Series 4 shaft with a round implement end and a 39-63 in reach.

Who should skip it: anyone who needs a slip clutch, CE certification or more reach.

SCITOO lists a yellow Series 4 PTO shaft with a 1-3/8 in 6-spline tractor end and a 1-3/8 in round implement end, without a slip clutch. Compressed length is 39 in (1000 mm) and extended length is 63 in (1620 mm). The maker states 35 Hp, 26 Kw and 460 Nm at 540 rpm, and 55 Hp, 40 Kw and 380 Nm at 1000 rpm.

Pros

  • 39-63 in range suits common hitch setups
  • 6-spline tractor end, round implement end, 1-3/8 in
  • 35 Hp at 540 rpm and 55 Hp at 1000 rpm
  • 20CrMnTi carburized steel joints and Q345 steel tube

Cons

  • No warranty term is stated
  • No slip clutch is included
  • No CE certification is stated
  • No safety chain stated, unlike the VEVOR shafts

What brush hog pto shaft parts do and how to match them

A PTO shaft is a driveline, not a single part. The telescoping tube changes length as the mower rises and falls, the universal joints let the shaft bend at each end as the mower moves, and the yokes join the tube to the tractor and implement ends. The shield covers the spinning tube, and a slip clutch gives way before shock loads travel up the driveline. Match by length first, then ends, then power rating.

See our best gear oil for brush hog roundup for the gearbox side of the same machine.

Step 1: measure the length you need

Measure with the mower hitched and level, from the tractor PTO stub to the cutter gearbox input, at the closest and farthest hitch points. Pick a shaft with a compressed length below the closest measurement and an extended length beyond the farthest.

Step 2: match the ends and the series

All four use a 1-3/8 in tractor end with 6 splines, the standard size for a brush hog driveline. The implement end differs: the VEVOR Series 5 and the ACZCR use a 1-3/8 in 6-spline end, while the VEVOR Series 4 and the SCITOO use a round end. Match the implement end and the series to the cutter.

Step 3: check the power rating

Each listing states power at 540 rpm and 1000 rpm. The VEVOR Series 5 states 47 Hp at 540 rpm and 77 Hp at 1000 rpm, the highest ratings here. The other three state 35 Hp at 540 rpm, 53 Hp or 55 Hp at 1000 rpm. Pick a shaft rated for the tractor PTO speed you run.

The gear: four PTO shafts for a brush hog

Once length, ends and power rating are matched, these four cover the common setups.

Safety

Keep the shield in place and the safety chain attached while the shaft turns, and never step over a turning shaft. Stop the tractor and take the PTO out of gear before working on it. Clear debris before mowing, and keep children, pets and bystanders away from the work area. Refuel only with the engine off and cool.

FAQ: mowing large lots

What size PTO shaft fits a brush hog?

All four use a 1-3/8 in tractor end with 6 splines. Match the implement end to the cutter gearbox: 6-spline on the Series 5 and ACZCR, round on the VEVOR Series 4 and SCITOO.

How is a PTO shaft measured?

Measure from the tractor PTO stub to the cutter gearbox input at the closest and farthest points of hitch travel, then pick a shorter compressed length and a longer extended length.

Does a brush hog PTO shaft need a slip clutch?

A slip clutch gives way before shock loads travel up the driveline. Only the VEVOR Series 5 here includes one; the other three list no slip clutch.

What is the difference between a Series 4 and a Series 5 PTO shaft?

In this group, the VEVOR Series 5 states 47 Hp at 540 rpm and 77 Hp at 1000 rpm, while the three Series 4 shafts here state 35 Hp at 540 rpm and 53 Hp or 55 Hp at 1000 rpm.

More mowing guides

More buying guides

Brush and Field Mowers ·

Are Flail Mowers Good for Brush Clearing?

A flail mower with hammer blades handles brush that a finish mower cannot, as long as the growth matches the blades and the ground…

Brush and Field Mowers ·

Brush Cutter Blade Types and Uses

A guide to brush cutter blade types, from three-tooth clearing blades to carbide-tipped saw blades, and which growth each one handles.