Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Chainsaw Chain Sizes: How to Choose the Right Chain

A chainsaw chain fits when its pitch, gauge, drive link count and bar length match the bar and the manual, and this guide shows how to read each value.

Chainsaw Chain Sizes: How to Choose the Right Chain
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KAKEI S56 16 Inch 3/8 LP 56 Drive Link Chainsaw Chain, 3 PackKAKEI S56 16 Inch 3/8 LP 56 Drive Link Chainsaw Chain, 3 Pack9.7/10View on Amazon
  2. 2JINFFR S40 10 Inch 3/8 LP 40 Drive Link Chainsaw Chain, 5 PackJINFFR S40 10 Inch 3/8 LP 40 Drive Link Chainsaw Chain, 5 Pack9.7/10View on Amazon
  3. 3Loggers Art Gens 16 Inch 3/8 LP 56 Drive Link Chainsaw Chain, 2 PackLoggers Art Gens 16 Inch 3/8 LP 56 Drive Link Chainsaw Chain, 2 Pack9.6/10View on Amazon
  4. 4GSSHBR S33 8 Inch 3/8 LP 33 Drive Link Chainsaw Chain, 4 PackGSSHBR S33 8 Inch 3/8 LP 33 Drive Link Chainsaw Chain, 4 Pack9.5/10View on Amazon

Out on the back acres, a dull chain turns a quick limbing job into a long push against the saw, and the fix often starts before the file comes out: the chain on the bar has to match the bar it runs on. Chainsaw chain sizes are a set of measurements that must match the bar and the manual, and this guide shows how to read each one and match a new chain to the saw you own.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

KAKEI S56 16 Inch 3/8 LP 56 Drive Link Chainsaw Chain, 3 Pack
KAKEI9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 16 inch semi-chisel chain in a 3 pack that covers the pitch, gauge and drive link count for a 16 inch bar, with low kickback performance to ANSI B175.1-2012 and CSA Standard Z62.3 stated.

Who it's for: owners of a 16 inch bar who want a low kickback chain with stated ANSI and CSA performance and spares on hand.

Who should skip it: anyone whose bar takes a different pitch, gauge or drive link count.

The KAKEI S56 is a 16 inch chain with 3/8 LP pitch, .050 gauge and 56 drive links, sold as a 3 pack. The maker states low kickback performance to ANSI B175.1-2012 and CSA Standard Z62.3, and describes Germany steel, hardened and quenched rivets, and chrome-plated cutters. It fits Craftsman, Poulan, Ryobi, Echo and Greenworks bars that take this size.

Pros

  • 16 inch length, 3/8 LP pitch, .050 gauge and 56 drive links for a 16 inch bar
  • Low kickback chain that meets ANSI B175.1-2012 and CSA Standard Z62.3
  • 3 chains in the pack, so a spare is on hand
  • Chrome-plated cutters and hardened, quenched rivets, per the maker

Cons

  • Fits only bars that match 3/8 LP pitch, .050 gauge and 56 drive links
  • No warranty term is stated
  • Sold as a 3 pack, so buyers who need one chain get 3
  • All 3 chains share one size, so they suit one bar length only
JINFFR S40 10 Inch 3/8 LP 40 Drive Link Chainsaw Chain, 5 Pack
JINFFR9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 10 inch semi-chisel chain in a 5 pack for smaller bars, with low kickback ANSI standards stated and a wide fit list for Echo, Worx, Sun Joe, Remington and Craftsman saws.

Who it's for: owners of 10 inch bars and pole saws who want spares on hand.

Who should skip it: anyone with a bar longer than 10 inch, or a bar that takes a different drive link count.

The JINFFR chain is a 10 inch, 3/8 LP pitch, .050 gauge chain with 40 drive links, sold as a 5 pack. The maker states low kickback ANSI standards, Germany steel, chrome-plated cutters and protective oil, with fitment for Echo CS-271, Worx WG309, Sun Joe SWJ807E, Remington RM1035P and Craftsman S40. The maker states after-sale service replies within 24 hours.

Pros

  • 5 chains in the pack, the largest pack in this guide
  • 10 inch length with 3/8 LP pitch, .050 gauge and 40 drive links for smaller bars
  • Low kickback ANSI standards stated
  • Wide fit list: Echo CS-271, Worx WG309, Sun Joe SWJ807E, Remington RM1035P and Craftsman S40

Cons

  • Fits only bars that take 40 drive links at 3/8 LP pitch and .050 gauge
  • 10 inch length suits small bars only
  • No warranty term is stated
  • Sold as a 5 pack, so buyers who need one chain get 5
Loggers Art Gens 16 Inch 3/8 LP 56 Drive Link Chainsaw Chain, 2 Pack
Loggers Art Gens9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 16 inch chain in a 2 pack with 3/8 LP pitch, .050 gauge and 56 drive links, for Echo, McCulloch, Poulan, Homelite and Ryobi bars.

Who it's for: owners of a 16 inch bar who want a spare chain for the same bar.

Who should skip it: anyone who needs a stated safety certification, or a bar that takes a different size.

The Loggers Art Gens chain is a 16 inch chain with 3/8 LP pitch, .050 gauge and 56 drive links, sold as a 2 pack. The maker describes high temperature quenching and wear resistant steel, and lists fitment for Echo, McCulloch, Poulan, Homelite and Ryobi bars.

Pros

  • 16 inch length with 3/8 LP pitch, .050 gauge and 56 drive links
  • 2 chains in the pack, a spare for the same bar
  • High temperature quenching and wear resistant steel, per the maker
  • Fits Echo, McCulloch, Poulan, Homelite and Ryobi bars

Cons

  • Fits only bars that take 56 drive links at 3/8 LP pitch and .050 gauge
  • No safety certification is stated
  • Sold as a 2 pack, so buyers who need one chain get 2
  • Cutter type is not stated
GSSHBR S33 8 Inch 3/8 LP 33 Drive Link Chainsaw Chain, 4 Pack
GSSHBR9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

An 8 inch semi-chisel chain for pole saws and small bars, in a 4 pack with a 33 drive link count for Chicago, Sun Joe, Portland and Greenworks saws.

Who it's for: owners of an 8 inch pole saw who want spares for a small bar.

Who should skip it: anyone who needs one settled gauge and pack count before ordering, or a bar longer than 8 inch.

The GSSHBR chain is an 8 inch chain with 3/8 LP pitch and 33 drive links, sold for pole saws and small bars. The maker describes Germany steel, hardened and quenched rivets, and semi-chisel cutters, and lists fitment for Chicago, Sun Joe SWJ800E, Portland and Greenworks saws. The maker lists pack counts of 2 and 4, and gauges of .043 and .050; check before ordering.

Pros

  • 8 inch length with 3/8 LP pitch and 33 drive links for small bars and pole saws
  • 4 chains in the pack
  • Semi-chisel cutters with hardened, quenched rivets, per the maker
  • Fits Chicago, Sun Joe SWJ800E, Portland and Greenworks saws

Cons

  • Fits only bars that take 33 drive links at 3/8 LP pitch
  • 8 inch length suits small bars only
  • No safety certification is stated
  • Fits a short list of brands, so check the bar stamp before ordering

Chainsaw Chain Sizes: The Measurements That Matter

A chain size is pitch, gauge and drive link count, plus the bar length it fits. Pitch sets the spacing of the drive links, gauge is the thickness of the drive link, and the drive link count is how many drive links the chain has. Each value must match the bar, or the chain will not sit right in the groove or on the sprocket.

Measurement What to match Where to find it
Pitch Match the stamp value Bar stamp or manual
Gauge Match the stamp value Bar stamp or manual
Drive links Match the stamp value Bar stamp or manual
Bar length Match the stamp value Bar stamp or manual

Read the stamp on the side of the guide bar, or open the manual, and write down each value before ordering. A chain that matches pitch and gauge but has the wrong drive link count will not fit the bar. See our chainsaw size guide for help with bar length.

Chainsaw Chains That Match the Sizes Above

The chains below cover 16, 10 and 8 inch bars, and each one states the pitch, gauge and drive link count to match against the bar stamp.

How to Read the Bar Stamp

Look on the side of the guide bar for the stamped pitch, gauge, bar length and drive link count, or find the same values in the manual, and order by those values rather than by brand alone.

Match each value from the stamp, not just the bar length. A chain with the wrong drive link count will not fit the bar, even when the pitch and gauge match.

Fit the New Chain

With the size matched, fit the chain to the bar and sprocket, set the tension per the manual, and check the fit before cutting. Wear eye and hearing protection, clear debris from the work area, and keep children and pets out of the yard while the saw runs. See our chainsaw parts guide for common replacements.

Safety

Wear eye and hearing protection and sturdy shoes. Clear sticks, stones and other debris before you cut, and keep children, pets and bystanders away from the work area. Refuel only with the engine off and cool.

FAQ: mowing large lots

How do I find my chainsaw chain size?

Read the stamp on the side of the guide bar, or open the manual, and match pitch, gauge, bar length and drive link count.

What does 3/8 LP pitch mean?

It is the low profile pitch size stated on the chains in this guide, and the bar and sprocket must take the same pitch.

What happens if the gauge is wrong?

A gauge of .050 will not sit right in a bar made for .043, so match the gauge on the bar stamp before ordering.

How many drive links does a 16 inch bar need?

It depends on the bar: the 16 inch chains in this guide take 56 drive links, while the 10 inch chain takes 40 and the 8 inch chain takes 33.

Can I use a 56 drive link chain on any 16 inch bar?

No. The pitch and gauge must also match, so a 56 drive link chain at 3/8 LP pitch and .050 gauge fits only bars made for those values.

More mowing guides

More buying guides

Trimmers and Blowers ·

How to Measure Chainsaw Chain Size

Measure a chainsaw chain by its pitch, gauge and drive link count, then match every figure to the replacement chain.