Chainsaw Parts: Common Replacements Guide
A guide to chainsaw parts: how to match a replacement chain to the bar by pitch, gauge, length and drive links.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Oregon S62 18 in 3/8 LP .050 Chainsaw Chain 3-Pack9.6/10View on Amazon - 2
KAKEI S62 18 in 3/8 LP .050 Semi-Chisel Chainsaw Chain 3-Pack9.6/10View on Amazon - 3
SawWorks 20 in .325 .058 Full Chisel Chainsaw Chain 3-Pack9.6/10View on Amazon - 4
Fifchall 14 in 3/8 LP .050 Low-Kickback Chainsaw Chain 4-Pack9.6/10View on Amazon
A chainsaw that binds in a cut or wanders off the line is often telling you that a part has worn out. Chainsaw parts wear at different rates, and the chain, the part that does the cutting, wears out sooner than the bar it rides on. This guide explains which chainsaw parts wear out, how to match a replacement chain to the bar, and what to check before you order a new chain.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Oregon S62 18 in 3/8 LP .050 Chainsaw Chain 3-Pack
Low-kickback 18-inch replacement chain in a 3-pack, with a bumper drive link for saws up to 42cc.
The Oregon S62 is the low-kickback chain in this group, with a bumper drive link paired with a depth gauge design. The listing states 3/8 in LP pitch, .050 in gauge, 62 drive links and an 18 in bar, and fits saws up to 42cc, naming models from Husqvarna, Echo, Poulan, Craftsman, Ryobi and more.
Pros
- Low-kickback design with a bumper drive link paired with a depth gauge
- Fits saws up to 42cc, with a long list of named saw models in the listing
- Maker has built saw chain since 1947 and designs in the USA
- 3-pack gives spare chains for 18 in bars
Cons
- Fits saws up to 42cc only, so check the manual for larger saws
- Warranty term is not stated on the listing
- Weight is not stated on the listing
- Chain fits only 18 in bars, so the bar stamp must match exactly

KAKEI S62 18 in 3/8 LP .050 Semi-Chisel Chainsaw Chain 3-Pack
Semi-chisel 18-inch chain in a 3-pack, with hardened rivets and chrome-plated cutters.
The KAKEI S62 is a semi-chisel 18 in chain sold as a 3-pack, with 3/8 in LP pitch, .050 in gauge and 62 drive links. The listing states German steel, hardened and quenched rivets, and Japanese chrome-plated cutters. It meets the kickback performance requirements of ANSI B175.1-2012 and CSA Standard Z62.3, and the chain comes with protective oil that resists corrosion.
Pros
- Meets ANSI B175.1-2012 and CSA Standard Z62.3 kickback requirements
- German steel with hardened and quenched rivets
- Japanese chrome-plated cutters, ground and cold-headed
- Protective oil on the chain resists corrosion
Cons
- Warranty term is not stated on the listing
- Fit list names brands, not saw models, so check the bar stamp
- Chain fits only 18 in bars with 62 drive links
- Listing states no engine size limit, so check the manual for fit

SawWorks 20 in .325 .058 Full Chisel Chainsaw Chain 3-Pack
Full chisel 20-inch chain in a 3-pack, for 62cc and 58cc saws.
The SawWorks chain is the full chisel chain in this group and the only 20 in chain here, with .325 in pitch, .058 in gauge and 76 drive links in a 3-pack. The listing states German steel, hardened rivets and Japanese chrome-plated cutters, and names fits for 62cc and 58cc saws from Vevor, Supmix, Neotec, Wemars and Blue Max. The listing also claims the cutters reduce kickback, but warns that the chain may be capable of kickback.
Pros
- Full chisel cutters, described by the maker as high cutting efficiency
- German steel with hardened rivets
- Japanese chrome-plated cutters, precision ground and cold-headed
- Fits 62cc and 58cc saws, with named models in the listing
Cons
- Listing warns the chain may kick back and needs experience and specialized training
- No ANSI or CSA kickback standard is stated for this chain
- Warranty term is not stated on the listing
- Chain fits only 20 in bars with 76 drive links

Fifchall 14 in 3/8 LP .050 Low-Kickback Chainsaw Chain 4-Pack
Low-kickback 14-inch chain in a 4-pack, for pole saws and small saws.
The Fifchall chain is the 14 in chain in this group, sold as a 4-pack with 3/8 in LP pitch, .050 in gauge and 52 drive links. The listing states low kickback, heat treated and quenched rivets, and a product warranty, and says the chain is suitable for most 14-inch pole saws, naming fits from Craftsman, Echo, Ryobi, Poulan, Makita, Greenworks and Sun Joe.
Pros
- 4-pack gives the most spare chains in this group
- Low-kickback chain that meets the kickback performance requirement of ANSI Standards
- Heat treated and quenched rivets for a stronger link connection
- Product warranty is stated on the listing
Cons
- Warranty term is not stated on the listing
- Cutter style is not stated on the listing
- Chain fits only 14 in bars with 52 drive links
- Weight is not stated on the listing
Chainsaw parts: why the chain wears out
The chain is the chainsaw part in this guide that touches wood on every cut, so it dulls with use while the bar lasts longer. When cutting slows or the saw starts to wander, check the chain before you look at any other part.
| Chain | Bar length | Pitch and gauge | Drive links |
|---|---|---|---|
| Oregon S62 Chain | 18 in | 3/8 in LP, .050 in | 62 |
| KAKEI S62 Chain | 18 in | 3/8 in LP, .050 in | 62 |
| SawWorks 20 Inch Chain | 20 in | .325 in, .058 in | 76 |
| Fifchall 52DL Chain | 14 in | 3/8 in LP, .050 in | 52 |
The table shows why the bar stamp matters: the 18 in chains share pitch, gauge and drive link count, while the 20 in and 14 in chains differ on every measure. See the chainsaw chain sharpening guide for keeping a chain cutting between replacements.
Match the chain to the bar
Check the manual or the guide bar side stamp for pitch, gauge, length and drive link number before you order. The listings in this guide state those measures for each chain, and a chain that differs on any of them will not fit the bar. A 3-pack gives you spares on hand when a chain dulls mid-job, and the 4-pack Fifchall chain (on Amazon) covers the same need for a 14 in bar.
A bar cover keeps the bar and chain protected in storage and transport. See the chainsaw bar cover picks for covers that fit common bar lengths.
Semi-chisel or full chisel
The KAKEI chain is a semi-chisel chain, and the SawWorks chain (on Amazon) is a full chisel chain. The SawWorks listing describes its full chisel cutters as high cutting efficiency, and the KAKEI listing describes its semi-chisel cutters as chrome-plated for durability. Pick the cutter style your saw manual calls for.
Low-kickback chains
The Oregon chain uses a bumper drive link paired with a depth gauge design for reduced kickback. The KAKEI chain meets the kickback performance requirements of ANSI B175.1-2012 and CSA Standard Z62.3, the Fifchall chain meets the kickback performance requirement of ANSI Standards, and the SawWorks listing claims its cutters reduce kickback while warning that the chain may kick back. The SawWorks listing claims its cutters reduce kickback, but it also carries a warning: the listing states that it may be capable of kickback and that you should not use it unless you have experience and specialized training for dealing with kickback.
Wear eye and hearing protection, clear sticks and debris from the work area, and keep bystanders away from the saw.
Chainsaw parts: replacement chains
When the chain is the worn part, a matched replacement chain is the fix, and the chains below cover the bar lengths in this guide.
FAQ: mowing large lots
How can you tell which chainsaw chain fits a saw?
Check the manual or the guide bar side stamp for pitch, gauge, length and drive link number, then match all of them to the listing. The Oregon and KAKEI chains here fit 18 in bars with 3/8 in LP pitch, .050 in gauge and 62 drive links.
What do pitch, gauge and drive links mean?
Pitch is the distance between drive links, gauge is the thickness of the drive link that rides in the bar groove, and drive links sit in the bar groove. The listings state pitch as 3/8 in LP or .325 in, gauge as .050 in or .058 in, and drive links as 62, 76 or 52.
What is the difference between a semi-chisel and a full chisel chain?
The KAKEI chain is a semi-chisel chain with chrome-plated cutters, and the SawWorks chain is a full chisel chain. The SawWorks listing describes its full chisel cutters as high cutting efficiency. The Oregon and Fifchall listings do not state a cutter style.
What does low-kickback mean on a chainsaw chain?
The Oregon chain pairs a bumper drive link with a depth gauge design, the KAKEI chain meets ANSI B175.1-2012 and CSA Standard Z62.3 kickback requirements, the Fifchall chain meets the kickback performance requirement of ANSI Standards, and the SawWorks listing claims its cutters reduce kickback while warning that the chain may kick back.
Does a 14-inch chain fit a pole saw?
The Fifchall listing states that its 14 in chain is suitable for most 14-inch pole saws. Check the length and drive links against your saw manual, since the chain must match the bar: this chain is 3/8 in LP pitch, .050 in gauge and 52 drive links.
More mowing guides
- Chainsaw Chain Sharpening Guide: How to File a Chain by Hand
- Best Chainsaw Bar Cover (2026): 5 Picks for Storage and Transport
- Best Chainsaw Tool Kit (2026): 5 Picks Compared
- Best Chainsaw Chain for Dirty Wood (2026)
For more on trimmers, blowers and saws, see the trimmer and blower reviews.




