Chainsaw Bar Parts: Replacement Guide
Match bar length, pitch, gauge and drive links to your saw, then swap the worn bar and chain with a matched combo.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Oregon 16-Inch Bar and Chain Combo9.7/10View on Amazon - 2
Oregon 18-Inch Bar and Chain Combo9.7/10View on Amazon - 3
DAOLONG 10-Inch Chainsaw Chain and Bar Kit9.6/10View on Amazon - 4
ZIYIZE 14-Inch Chainsaw Bar and Chain Combo, 52 Drive Links9.6/10View on Amazon
A chainsaw that stops cutting straight often points at the bar or the chain, not the engine. The bar guides the chain, and a worn or bent bar can make cuts wander, so the fix starts with the parts that touch the wood. Chainsaw bar parts are the bar and the chain, and the measurements that tie them to your saw are bar length, pitch, gauge and drive link count; this guide shows how to match them before you order.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Oregon 16-Inch Bar and Chain Combo
16-inch bar and chain combo at 3/8-inch pitch, .050-inch gauge and 55 drive links, for Stihl saws up to 42 cc.
Who it's for: owners of a Stihl saw in the listed range who want a matched bar and chain in one box.
Who should skip it: anyone whose saw takes a different bar length, mount or drive link count.
The Oregon 16-inch combo pairs a 16-inch bar with a 55-link chain at 3/8-inch low-profile pitch and .050-inch gauge, on an A074 mount. The maker lists it for Stihl MS 170, MS 180 and MS 180 C saws up to 42 cc, and the chain uses the LubriTec oiling system. The chain is rated low kickback.
Pros
- Matched bar and chain: 16 in, 3/8 in pitch, .050 in gauge, 55 links
- Fits Stihl MS 170, MS 180 and MS 180 C saws up to 42 cc
- LubriTec oiling keeps the bar and chain oiled while cutting
- Low-kickback chain
Cons
- Only fits saws that take a 16-inch bar with an A074 mount
- No warranty term is stated
- Single chain in the box, so a spare needs a separate order
- Made for saws up to 42 cc, not for larger saws

Oregon 18-Inch Bar and Chain Combo
18-inch bar and chain combo at .325-inch pitch, .063-inch gauge and 74 drive links, made to fit Stihl saws from 38 to 62 cc.
Who it's for: owners of a Stihl saw in the listed range who want a longer bar for reaching across limbs and logs.
Who should skip it: anyone whose saw takes a different bar length, mount or drive link count.
The Oregon 18-inch combo pairs an 18-inch bar with a 74-link chain at .325-inch pitch and .063-inch gauge, on a D025 mount. The maker lists it for Stihl models with an 18-inch bar, for saw sizes from 38 to 62 cc. The Lubri-Tec oiling system delivers oil to the chain while cutting, and the chain is rated low kickback.
Pros
- Matched bar and chain: 18 in, .325 in pitch, .063 in gauge, 74 links
- Fits Stihl models with an 18-inch bar and D025 mount
- Lubri-Tec oiling keeps the bar and chain oiled while cutting
- Low-kickback chain for safer cutting
Cons
- Only fits saws that take an 18-inch bar with a D025 mount
- No warranty term is stated
- Single chain in the box, so a spare needs a separate order
- Made for saws from 38 to 62 cc, not for smaller saws

DAOLONG 10-Inch Chainsaw Chain and Bar Kit
10-inch guide bar with 4 chains at 3/8-inch low-profile pitch, .043-inch gauge and 40 drive links, for Ryobi, Echo and Craftsman saws.
Who it's for: owners of a small saw who want spare chains on hand for pruning and limbing.
Who should skip it: anyone whose saw takes a different bar length, pitch, gauge or drive link count.
The DAOLONG kit pairs a 10-inch guide bar with 4 chains at 3/8-inch low-profile pitch, .043-inch gauge and 40 drive links. The maker lists fit for Ryobi, Echo, Craftsman and more, and the chains use semi-chisel teeth shaped for smooth cutting with reduced kickback. The chains are heat-treated to stay sharp longer, and the kit is made for pruning, limbing and light firewood work.
Pros
- 4 chains and 1 bar in the box, so spares are ready
- Matched chains: 10 in, 3/8 in pitch, .043 in gauge, 40 links
- Heat-treated chains made to stay sharp longer
- Semi-chisel teeth for smooth cutting with reduced kickback
Cons
- 10-inch bar suits pruning, limbing and light cutting, not larger jobs
- No oiling system is stated for the bar and chain
- Fit is listed for Ryobi, Echo and Craftsman, so other saws need a mount check
- Only one bar in the box, so a damaged bar needs a separate order

ZIYIZE 14-Inch Chainsaw Bar and Chain Combo, 52 Drive Links
14-inch bar with four carbide chains, 52 drive links, 3/8-inch LP pitch and .050-inch gauge.
Who it's for: owners of a 14-inch A041-mount saw who want four chains ready to swap.
Who should skip it: anyone with an A074-mount saw or a 16-inch bar.
The ZIYIZE kit handles the spare-chain step for a 14-inch saw: the bar measures 14 inches, with 52 drive links, 3/8-inch LP pitch, .050-inch gauge and an A041 tail mount. Four carbide chains come with the bar, each semi-chisel and low-kickback, meeting ANSI B175.1-2012 kickback performance. The chains come pre-sharpened, and the kit fits Echo CS-310, Husqvarna 120 and Ryobi RY3714.
Pros
- Four carbide chains come with one 14-inch bar
- Semi-chisel, low-kickback chains meet ANSI B175.1-2012
- Chains come pre-sharpened and ready to use
- Fits Echo CS-310, Husqvarna 120 and Ryobi RY3714
Cons
- 14-inch length only; a 16-inch saw needs a longer bar
- A041 tail mount only, so check your saw's mount before ordering
- The listing does not state a weight for the bar or chains
- Suited to light-duty tasks such as trimming branches and cutting firewood
Chainsaw bar parts: what to match before you buy
The measurements that decide whether a bar and chain fit your saw are bar length, pitch, gauge and drive link count. Pitch is the distance between the drive links, gauge is the thickness of the drive links, and the drive link count is the number of links in the loop. The mount is the shape where the bar meets the saw, and it has to match too.
| Combo | Bar | Pitch | Gauge | Drive links |
|---|---|---|---|---|
| Oregon 16-Inch Combo | 16 in | 3/8 in | .050 in | 55 |
| Oregon 18-Inch Combo | 18 in | .325 in | .063 in | 74 |
| DAOLONG 10-Inch Kit | 10 in | 3/8 in | .043 in | 40 |
| ZIYIZE 14-Inch Combo | 14 in | Not stated | Not stated | 52 |
Match the numbers to the bar and chain you are replacing. The Oregon combos list fit by saw model, the DAOLONG kit (on Amazon) lists fit by brand, and the ZIYIZE combo (on Amazon) gives bar length and drive links only.
The bar and chain combos
Each combo below pairs a bar with a matching chain: the bar sets the length, the chain does the cutting, and the listed fit tells you which saws take it.
Check the mount and the saw size
The two Oregon combos use different mounts: the 16-inch combo uses an A074 mount and the 18-inch combo uses a D025 mount. The 16-inch combo fits Stihl MS 170, MS 180 and MS 180 C models up to 42 cc, while the 18-inch combo fits Stihl models with an 18-inch bar, for saw sizes from 38 to 62 cc.
Fit the new bar and chain
Take the old bar and chain off the saw, then set the new bar on the mount and loop the new chain around it. The DAOLONG kit includes 4 chains with its bar, so a dull chain can be swapped fast. Check that the chain moves freely by hand before you start the saw.
Keep the bar oiled
The Oregon combos use an automatic oiling system, which keeps the bar and chain oiled while cutting. A dry bar wears fast and heats the chain, so check the oil level before each session.
Safety
Wear eye and hearing protection and sturdy gloves, and clear sticks and debris from the work area before you start. Keep children, pets and bystanders away from the cutting area. Both Oregon chains are rated low kickback. The DAOLONG chains use semi-chisel teeth shaped for reduced kickback. See our Safety Disclaimer.
FAQ: mowing large lots
What do the numbers on a chainsaw bar mean?
Bar length is the length of the bar in inches. Pitch is the distance between the drive links, given here as 3/8 inch or .325 inch. Gauge is the thickness of the drive links, given here as .050 inch, .063 inch or .043 inch. Drive link count is the number of links in the loop: 55, 74, 40 and 52 across the combos here.
How do I know which bar fits my saw?
Match the bar length, pitch, gauge, drive link count and mount to your old bar and chain. The 16-inch Oregon combo uses an A074 mount and fits Stihl MS 170, MS 180 and MS 180 C saws up to 42 cc. The 18-inch combo uses a D025 mount and fits Stihl models with an 18-inch bar, for saw sizes from 38 to 62 cc.
What comes in a bar and chain combo?
A combo pairs one bar with one chain that matches it. The DAOLONG kit is the exception here: it includes 4 chains and 1 guide bar.
Do I need to oil a new bar and chain?
Yes, a bar and chain need oil while cutting. Both Oregon combos use an automatic oiling system, LubriTec on the 16-inch combo and Lubri-Tec on the 18-inch combo, which keeps the bar and chain oiled while the saw runs. Check the oil level before each session.
Can I put a longer bar on my saw?
Only if the longer bar matches your saw mount, pitch, gauge and drive link count, and your saw is listed for that bar length. The 16-inch combo is listed for saws up to 42 cc and the 18-inch combo for saws from 38 to 62 cc.
More mowing guides
- Chainsaw Bar Types: Guide Bar Options Compared
- Best Chainsaw Under $200 (2026)
- Best Battery Pruning Saw (2026): 5 Picks Compared
- Best Saw for Cutting Tree Roots (2026): 5 Blades Compared
- Best Loppers for Tree Trimming (2026): 5 Picks Compared
Use the Mower Matcher to narrow down choices by acreage, terrain, budget, and power type.




