Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Chainsaw Bar Types: Guide Bar Options Compared

Match bar length, pitch, gauge, drive links and mount to your saw, then pick a low-kickback combo that fits.

Chainsaw Bar Types: Guide Bar Options Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Oregon 20 in Bar and Chain Combo, 3/8 in Pitch, 72 Drive LinksOregon 20 in Bar and Chain Combo, 3/8 in Pitch, 72 Drive Links9.7/10View on Amazon
  2. 2Oregon 18 in Bar and Chain Combo, 3/8 in Pitch, 62 Drive LinksOregon 18 in Bar and Chain Combo, 3/8 in Pitch, 62 Drive Links9.6/10View on Amazon
  3. 3ZIYIZE 16 in Bar and Chain Combo, 3/8 in Pitch, 56 Drive LinksZIYIZE 16 in Bar and Chain Combo, 3/8 in Pitch, 56 Drive Links9.6/10View on Amazon

A chainsaw cuts only as well as the bar and chain it carries, and the wrong bar turns a simple cut into a bind, a stall or a chain that will not fit at all. Chainsaw bar types differ by length, by the chain they carry and by the mount that fixes the bar to the saw, so the right choice starts with the saw you already own. This guide explains each difference in plain terms.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Oregon 20 in Bar and Chain Combo, 3/8 in Pitch, 72 Drive Links
Oregon9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

20 in bar and chain combo with 72 drive links, 3/8 in pitch and .050 in gauge, for saws up to 60cc.

The Oregon 20 in combo pairs a 20 in bar with a 72 drive link chain at 3/8 in pitch and .050 in gauge, and it uses a K095 motor mount. The maker lists it for saws up to 60cc, and the LubriTec oiling system keeps the chain and bar oiled. A low-kickback design is stated for this combo.

Pros

  • 20 in bar for the widest cuts of the three
  • Fits saws up to 60cc, the largest saw size stated here
  • Low-kickback design stated for this combo
  • LubriTec oiling system keeps the chain and bar oiled

Cons

  • Warranty term is not stated on the listing
  • K095 mount fits only saws with that mount
  • Only one chain in the box, so no spare on hand
  • 20 in bar is more bar than a small saw needs
Oregon 18 in Bar and Chain Combo, 3/8 in Pitch, 62 Drive Links
Oregon9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

18 in bar and chain combo with 62 drive links, 3/8 in low profile pitch and .050 in gauge, for saws up to 42cc.

The Oregon 18 in combo pairs an 18 in (45 cm) bar with a 62 drive link chain at 3/8 in low profile pitch and .050 in gauge, and it uses an A041 motor mount. The maker lists it for saws up to 42cc, and the chain has an ID link for easy replacement. The low-kickback design meets ANSI B175.1-2012.

Pros

  • 18 in bar suits saws up to 42cc
  • Low-kickback design meets ANSI B175.1-2012
  • Reversible guide bar, per the listing
  • LubriTec oiling system keeps the chain and bar oiled

Cons

  • Warranty term is not stated on the listing
  • A041 mount fits only saws with that mount
  • Only one chain in the box, so no spare on hand
  • 18 in bar is shorter than the 20 in combo
ZIYIZE 16 in Bar and Chain Combo, 3/8 in Pitch, 56 Drive Links
ZIYIZE9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

16 in bar and chain combo with 4 chains and 1 bar, 3/8 in low profile pitch, .050 in gauge and 56 drive links.

The ZIYIZE 16 in combo pairs a 16 in bar with 4 chains at 3/8 in low profile pitch, .050 in gauge and 56 drive links. The maker lists chrome-plated cutters, an anti-clog design and a pre-sharpened chain. It lists fits for Poulan, Ryobi, Echo, Greenworks, EGO and more, but it states no saw size limit and no warranty term.

Pros

  • 4 chains and 1 bar in the box, the most pieces here
  • Chrome-plated cutters resist high temperatures, per the maker
  • Pre-sharpened chain, ready to use out of the box
  • Fits many brands running the same specs

Cons

  • No saw size limit is stated, so check your saw before ordering
  • No low-kickback design is stated on the listing
  • 16 in bar is the smallest of the three
  • Fits only saws running the same 3/8 in low profile specs

Chainsaw bar types: length, chain and mount

A bar and chain combo is defined by a small set of measurements, and every one of them has to match the saw. Bar length sets how wide a cut the saw can make in one pass. Pitch and gauge set which chain fits the bar, and drive links set the chain length for that bar. The mount sets whether the bar bolts onto the saw at all.

Combo Bar length Chain Fits saws up to
Oregon 20 in Combo 20 in 3/8 in pitch, .050 in gauge, 72 drive links 60cc
Oregon 18 in Combo 18 in 3/8 in low profile pitch, .050 in gauge, 62 drive links 42cc
ZIYIZE 16 in Combo 16 in 3/8 in low profile pitch, .050 in gauge, 56 drive links Not stated

Bar length and saw size

Longer bars reach across wider trunks and limbs, but they ask more of the saw. The Oregon 18 in combo fits saws up to 42cc, and the Oregon 20 in combo fits saws up to 60cc. The ZIYIZE 16 in combo states no saw size limit, so check your saw manual before ordering.

The 16 in and 18 in combos use 3/8 in low profile pitch, and the 20 in combo uses 3/8 in pitch; all three use .050 in gauge. Pitch matches the chain to the drive sprocket, and gauge matches the drive links to the bar groove. Drive links are what set the chain to the bar: 56 drive links for the 16 in bar, 62 for the 18 in bar and 72 for the 20 in bar. A chain with the wrong link count will not sit on the bar, even when the pitch and gauge match.

Mount: A041 and K095

The mount is the part buyers miss most often. The Oregon 18 in combo uses an A041 motor mount, and the Oregon 20 in combo uses a K095 motor mount, and the two mounts are not interchangeable. Check the mount on your saw before ordering. Not every bar fits every saw, as our are chainsaw bars universal guide explains.

Low-kickback bars and oiling

Both Oregon combos have a low-kickback design. The 18 in combo meets the recoil performance requirements of ANSI B175.1-2012. Both also use the maker LubriTec oiling system, which keeps the chain and bar oiled. The Oregon 18 in combo has a reversible guide bar, and its chain has an ID link for easy replacement. The ZIYIZE combo (on Amazon) has chrome-plated cutters, an anti-clog design and a pre-sharpened chain that needs no special tools to fit.

Bar and chain combos for the job

Once the length, chain size and mount are matched to the saw, a bar and chain combo puts the bar, the chain and the fit in one box.

Keep the bar cutting well

A bar that stays oiled and a chain that stays sharp cut with less effort than a dry, dull one. Check the chain tension and the bar oil before each cutting session. Our chainsaw bar maintenance guide covers the routine in full.

Safety

Wear eye and hearing protection and sturdy shoes. Clear sticks, stones and other debris before cutting, and keep children, pets and bystanders away from the work area. Follow the saw manual for bar and chain fitting.

FAQ: mowing large lots

What size chainsaw bar do I need?

Match the bar to the saw and the work. The combos here run 16 in, 18 in and 20 in, with the 18 in combo for saws up to 42cc and the 20 in combo for saws up to 60cc.

What do pitch, gauge and drive links mean?

Pitch is the spacing of the chain, gauge is the thickness of the drive links in the bar groove, and drive links set the chain length for the bar. The 16 in and 18 in combos use 3/8 in low profile pitch, the 20 in combo uses 3/8 in pitch, and all three use .050 in gauge, with 56, 62 and 72 drive links for the 16 in, 18 in and 20 in bars.

Are chainsaw bars universal?

No. Bars differ by mount as well as by length and chain size: the Oregon 18 in combo uses an A041 motor mount and the Oregon 20 in combo uses a K095 motor mount. Check the mount on your saw before ordering.

What is a low-kickback bar?

A bar and chain built to reduce kickback. Both Oregon combos here have a low-kickback design, and the 18 in combo meets the recoil performance requirements of ANSI B175.1-2012.

How do I know a bar and chain combo fits my saw?

Match the bar length, pitch, gauge, drive links and mount to your saw, then check the fit list. The ZIYIZE combo lists Poulan, Ryobi, Echo, Greenworks, EGO and more, and the Oregon 18 in combo lists Echo, Craftsman, McCulloch, Homelite, Poulan, Makita and Ryobi.

More mowing guides

More buying guides

Trimmers and Blowers ·

Do Electric Chainsaws Need Bar Oil?

Yes, electric chainsaws need bar oil: the bar and chain still need lubrication, and this guide shows how to check, fill and choose the…

Trimmers and Blowers ·

Chainsaw Bar Parts: Replacement Guide

Match bar length, pitch, gauge and drive links to your saw, then swap the worn bar and chain with a matched combo.