Chainsaw Safety Gear: What Homeowners Need
Chainsaw safety gear that covers legs, head and hands: chaps in several layers and fits, plus a helmet, hearing protection and gloves for cutting days.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ZELARMAN 8-Layer Chainsaw Chaps, 38 in Apron Style9.7/10View on Amazon - 2
Husqvarna Classic Power Kit with Chaps, Helmet and Gloves9.6/10View on Amazon - 3
FORESTER Chainsaw Chaps, Apron Style, 37 in, Orange9.6/10View on Amazon - 4
Husqvarna Apron Chainsaw Chaps, 38 in, Black9.6/10View on Amazon
A wooded lot after a storm leaves limbs across the paths, rounds stacked by the shed and a saw that has to run before the brush pile grows past the fence line. That is the work chainsaw safety gear is made for: chaps that slow a moving chain at the legs, a helmet with a face shield and hearing protection, and gloves that guard the hands while the saw is running. The gear below covers each of those parts, ranked by the scores the listings earn.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

ZELARMAN 8-Layer Chainsaw Chaps, 38 in Apron Style
Eight-layer apron chaps in 1000-denier Oxford polyester that shield the legs, with a waist up to 49 inches and a 38-inch length.
Who it's for: owners who want the most layers and the widest set of stated certifications here.
Who should skip it: anyone who needs a stated weight or warranty term.
ZELARMAN lists these apron chaps with an 8-layer protective material that slows and stops a running chain, per the listing, behind a 1000-denier Oxford polyester outer. They are UL certified and comply with ASTM F3325-20, ASTM F1897-20, OSHA Regulation 1910.266 and ANSI Z133.1. The waist fits up to 49 in and the length is 38 in, shortened by 2 in by folding down the waistband.
Pros
- 8-layer protective material, above the 6-layer designs named
- UL certified; ASTM F3325-20, ASTM F1897-20, OSHA 1910.266, ANSI Z133.1
- 1000-denier Oxford polyester outer for durability
- Waist fits up to 49 in; 38 in length shortens by 2 in
Cons
- No weight is stated on the listing
- No warranty term is stated
- Mentions three sizes, shows only the Medium size
- No pocket is mentioned

Husqvarna Classic Power Kit with Chaps, Helmet and Gloves
A kit covering legs, head and hands: 5-layer chaps, a forest helmet with face shield and hearing protectors, and work gloves.
Who it's for: new chainsaw owners who want legs, head and hands covered in one purchase.
Who should skip it: anyone who wants professional-class chaps or a longer warranty term.
Husqvarna lists this Classic Power Kit with 5-layer chaps in 36 to 38 in with a 32 in inseam, a forest helmet with HDPE shell, face shield, ear muffs and sun peak, and large work gloves with a synthetic leather palm. The chaps and helmet meet ASTM F1897, ANSI Z133.1 and OSHA Regulation 1910-26 as stated, and the hearing protectors carry a 24dB(A) NRR rating. Weight is 2.72 pounds and the warranty is 90 days per the spec table; the OSHA reference is written as 1910-26 here, while the other listings write it as 1910.266.
Pros
- Covers legs, head and hands in one kit
- Chaps and helmet meet ASTM F1897, ANSI Z133.1, OSHA 1910-26
- Helmet: HDPE shell, face shield, ear muffs, sun peak
- Hearing protectors rated at 24dB(A) NRR
Cons
- Chaps are homeowner class, not professional class
- Warranty is 90 days, a short term
- OSHA reference written as 1910-26, not 1910.266
- Gloves are large size only

FORESTER Chainsaw Chaps, Apron Style, 37 in, Orange
Four-ply apron chaps that protect the legs, with an adjustable waist, a utility pocket and a water and oil repellent shell.
Who it's for: owners who want the widest waist range and a choice of lengths, with a pocket for tools.
Who should skip it: anyone who wants the lightest chaps here or a stated warranty term.
FORESTER lists these apron chaps in a 4-ply Oxford polyester outer that meets OSHA 1910.266, ASTM F1897 and CAN/BNQ 1923-450 M91 39JY CLASS B. The waist runs 30 to 48 in, the chaps come in 35, 37 and 40 in lengths, and a flip belt shortens the length by up to 2 in. A deep utility pocket holds tools in the field, and the shell resists water and oil. Weight is 2.8 pounds and overall length is 37 in per the spec table.
Pros
- OSHA 1910.266, ASTM F1897, CAN/BNQ 1923-450 M91 39JY CLASS B
- Waist 30 to 48 in; lengths of 35, 37 and 40 in
- Deep utility pocket for tools in the field
- Water and oil repellent outer shell
Cons
- Heaviest here at 2.8 pounds as listed
- No warranty term is stated
- Apron style covers the front only
- Only one color is listed

Husqvarna Apron Chainsaw Chaps, 38 in, Black
Five-layer apron chaps that guard the legs, with a gear pocket and an adjustable belt, in a light 1.76-pound build.
Who it's for: owners who want light chaps with a wedge pocket for felling work.
Who should skip it: anyone who needs a wider waist fit or a stated warranty term.
Husqvarna lists these functional apron chaps with 5 protective layers of 600 Denier polyester with PVC coating and Tek Warp layers, in a pull-apart design that the listing says clogs the sprocket system and slows or stops the chain. They meet ASTM F1897, ANSI Z133.1 and OSHA regulation 1910-266 and are UL certified. The waist fits up to 38 in with a 32 in inseam, with a felling wedge and gear pocket and Acetyl Delran buckles. Weight is 1.76 pounds per the spec table.
Pros
- Lightest here at 1.76 pounds as listed
- UL certified; ASTM F1897, ANSI Z133.1, OSHA 1910-266
- 5 layers of 600 Denier polyester with PVC coating
- Felling wedge and gear pocket; Acetyl Delran buckles
Cons
- No warranty term is stated
- Waist fits up to 38 in only
- Apron style covers the front only
- Only the 38 in length is listed
Chainsaw safety gear: the gear that covers you
Cutting starts at the legs, where the chain runs closest, then moves to the head and hands: chaps take the first contact, the helmet covers the head, and gloves handle the grip and the sharp edges of cut wood.
How to pick chaps that fit
Fit starts at the waist and the length. The FORESTER chaps adjust from a 30 to 48 in waist and come in 35, 37 and 40 in lengths, with a flip belt that shortens the length by up to 2 in. The ZELARMAN chaps fit a waist up to 49 in at a 38 in length, and fold down at the waistband to shorten by 2 in. The Husqvarna kit chaps run 36 to 38 in with a 32 in inseam, and the Husqvarna apron chaps fit a waist up to 38 in with a 32 in inseam. Match the listed length to your own measure from waist to ankle, noting the ZELARMAN length is measured waist to instep rather than inseam, so the chaps cover without dragging.
What the safety standards mean
ASTM F1897 covers leg protection for chainsaw operators, and every chap here meets it. ANSI Z133.1 and OSHA 1910.266 appear across the listings as the operator safety references, and the ZELARMAN chaps add ASTM F3325-20 and UL certification, while the FORESTER chaps add CAN/BNQ 1923-450 M91 39JY CLASS B. Layers are the other figure to watch: 8 layers on the ZELARMAN chaps, 5 layers on the Husqvarna kit and apron chaps, and a 4-ply Oxford polyester outer on the FORESTER chaps. The 1000-denier Oxford polyester on the ZELARMAN chaps and the 600 Denier polyester with PVC coating on the Husqvarna apron chaps describe the outer shell.
The helmet and gloves in the kit
The Husqvarna kit is the only pick here that covers the head and hands as well as the legs. It pairs 5-layer chaps with a forest helmet that has an HDPE shell, a face shield, ear muffs and a sun peak, plus work gloves with a synthetic leather palm. The hearing protectors carry a 24dB(A) NRR rating. Bought piece by piece, the helmet and gloves need the same attention: a face shield, hearing protection with a stated rating, and gloves that fit. Our best chainsaw tool kit picks cover the felling wedges and tools that ride in the gear pockets on these chaps.
Wear the gear on every cut
Apron-style chaps go on and off fast, which is the point: the FORESTER and ZELARMAN chaps and the Husqvarna apron chaps all use the open-back apron style, so they should not hang on a nail while the saw runs. Put the chaps on before the saw starts, keep the helmet and gloves on while cutting, and keep children, pets and bystanders out of the work area. The water and oil repellent shell on the FORESTER chaps suits damp brush, and the pockets on the FORESTER and Husqvarna apron chaps hold tools and a wedge within reach. For the saw itself, see our best battery chainsaw with large bar picks.
FAQ: mowing large lots
What chainsaw safety gear do I need to start cutting?
Chaps for the legs, a helmet with face shield and hearing protection for the head, and gloves for the hands. The Husqvarna kit covers all three in one box; the other picks here are chaps alone.
How should chainsaw chaps fit?
Match the waist and the length to the listings: waists here run from 30 to 48 in on the FORESTER chaps and up to 49 in on the ZELARMAN chaps, with lengths from 35 to 40 in across the picks, covering waist to ankle without dragging.
What do ASTM F1897 and ANSI Z133.1 mean on chaps?
They are the safety standards the listings cite for leg protection and operator safety. Every chap here meets ASTM F1897, and the ZELARMAN chaps add UL certification and ASTM F3325-20.
Can I wear chainsaw chaps over regular work clothes?
Yes. The apron style on the FORESTER, ZELARMAN and Husqvarna apron chaps slips on and off over work clothes, and the adjustable waists set the fit over layers.




