Chainsaw Safety Helmet: What to Look For
A chainsaw safety helmet combines a hard hat shell, a visor and ear muffs, and this guide shows what to check in each part before cutting.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
NoCry ForestArmor+ 6-in-1 Chainsaw Helmet with Two Visors9.8/10View on Amazon - 2
GREEN DEVIL 2910-F Chainsaw Helmet with Mesh Shield and Visor9.6/10View on Amazon - 3
GREEN DEVIL Matrix FB Full Brim Chainsaw Helmet9.6/10View on Amazon - 4
Oregon Combo Helmet with Mesh Visor and Ear Cups9.6/10View on Amazon
A wooded lot means chainsaw work: storm limbs over the drive, dead trees near the fence line, firewood rounds stacked by the shed. Before the saw starts, the head, face and ears need cover, and that is what a chainsaw safety helmet is for. A chainsaw safety helmet combines a hard hat shell, a visor and ear muffs as a matched set, so the shell, the visor and the muffs protect the head, the face and the ears together. This guide shows what to check in the shell, the visor and the fit, then compares helmets that list those parts.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

NoCry ForestArmor+ 6-in-1 Chainsaw Helmet with Two Visors
6-in-1 chainsaw helmet with a metal mesh visor, a clear polycarbonate face shield and 25.9 dB SNR ear muffs.
Who it's for: owners who want one helmet for cutting trees, firewood and brush, with both a mesh and a clear visor.
Who should skip it: anyone who wants a stated weight or chinstrap before buying.
The ForestArmor+ ships with two visors, a metal mesh visor and a clear polycarbonate face shield, plus ear muffs rated 25.9 dB SNR. The hard hat is rated ANSI Z89.1, Type I, and the listing describes it as suitable for Class E, G and C settings. The listing names all three classes together, so check the class the job needs before ordering. The visors are rated ANSI Z87.1. It fits head sizes from 21.2 to 24.4 in and switches between six configurations for cutting trees, firewood, brush and trimming.
Pros
- Two visors: metal mesh and clear polycarbonate face shield
- Ear muffs rated 25.9 dB SNR and ANSI S3.19
- Hard hat rated ANSI Z89.1, Type I; listing names Class E, G and C
- Six configurations; head size range of 21.2 to 24.4 in
Cons
- Weight is not stated on the listing
- No chinstrap is stated on the listing
- One size only, within 21.2 to 24.4 in
- Vent holes are not stated on the listing

GREEN DEVIL 2910-F Chainsaw Helmet with Mesh Shield and Visor
4-in-1 chainsaw helmet with dual-layer eye and face protection, a liner and a storage bag.
Who it's for: owners cutting with a chainsaw, hedge trimmer or bush-cutter who want a liner and a bag in the box.
Who should skip it: anyone who wants a stated weight, warranty term or noise rating before buying.
This GREEN DEVIL pairs a high-definition visor with a full-face metal mesh shield, so eye and face protection come as two layers that slide up and down. The shell is impact resistant ABS with a 6-point suspension, vent holes and a chinstrap. The size range is 53 to 63 cm, or 20.86 to 24.80 in, and the helmet meets ANSI/ISEA Z89.1-2014, Type I, Class C.
Pros
- Dual-layer protection: high-definition visor plus mesh shield
- Helmet liner and drawstring storage bag included
- Size range of 53 to 63 cm, or 20.86 to 24.80 in
- Face shield and visor meet ANSI Z87.1-2015, CE EN 1731
Cons
- Weight is not stated on the listing
- No warranty term is stated on the listing
- No ear muff noise rating is stated
- No sun peak is stated on the listing

GREEN DEVIL Matrix FB Full Brim Chainsaw Helmet
Full brim 4-in-1 chainsaw helmet in HDPE with an anti-fog visor, a mesh shield and sliding vents.
Who it's for: owners working in open sun, rain or wind who want full brim coverage and a visor that resists fog.
Who should skip it: anyone who wants a stated head size range, weight or warranty term before buying.
The Matrix FB is the full brim helmet here, with an HDPE shell shaped to shield against glare, sun, rain, wind and sand. It pairs an anti-fog built-in visor with a mesh face shield, and sliding vent holes open and close with the weather. The 6-point suspension, replaceable sweatband and chinstrap with a molded chin-cup set the fit, and the helmet meets ANSI/ISEA Z89.1-2014, Type I, Class C, with the face shield and goggles meeting ANSI Z87.1-2015 and CE EN 1731.
Pros
- Full brim HDPE shell shields sun, rain, wind and sand
- Anti-fog built-in visor plus a mesh face shield
- Sliding vent holes open and close with the weather
- Replaceable sweatband and chinstrap with molded chin-cup
Cons
- Weight is not stated on the listing
- No warranty term is stated on the listing
- No ear muff noise rating is stated
- Head size range is not stated on the listing

Oregon Combo Helmet with Mesh Visor and Ear Cups
Chainsaw helmet and visor combo with a stainless mesh visor, ear cups and six ventilation holes.
Who it's for: owners who want a vented helmet with a stainless mesh visor for logging and arboriculture work.
Who should skip it: anyone who wants a clear visor, a stated head size range or a chinstrap on the listing.
The Oregon combo set pairs an impact resistant helmet with a wider stainless steel mesh visor that flips up and down, plus articulated cap-mounted ear cups and a detachable sun peak. Six ventilation holes keep air moving, and the 6-point harness adjusts for a snug fit. The helmet meets ANSI Z89.1-2009, Type I, Class C, and the maker lists the weight at 2.0 lb.
Pros
- Six ventilation holes, the only stated vent count here
- Stainless steel mesh visor flips up and down
- Stated weight of 2.0 lb; dimensions 12.4 x 9.0 x 7.0 in
- Meets ANSI Z89.1-2009, Type I, Class C
Cons
- Only a mesh visor; no clear visor in the box
- No ear muff noise rating is stated
- No chinstrap is stated on the listing
- No head size range is stated on the listing
Chainsaw safety helmet: what to look for
A chainsaw safety helmet shields the head from falling limbs, the face and eyes from flying chips and debris, and the ears from saw noise. The shell, the visor and the ear muffs each handle part of that work, so check each part on its own before buying.
| Part | What to check | Why it matters |
|---|---|---|
| Shell | ANSI Z89.1 standard, Type I, stated class | Top impact protection for falling limbs |
| Visor | Mesh, clear polycarbonate, or both | Chips and dust reach the face from the cut |
| Ear muffs | Stated noise rating and ANSI S3.19, where the listing gives them | Saw noise sits close to the ears |
| Fit | 6-point suspension, chinstrap, stated head size | A shifting helmet leaves gaps in cover |
For the rest of the kit, see the chainsaw safety gear guide.
Check the shell and its rating
The helmets in this guide carry an ANSI Z89.1 shell standard with Type I for top impact: the Oregon lists ANSI Z89.1-2009, Type I, Class C, and the NoCry lists ANSI Z89.1, Type I, described as suitable for Class E, G and C settings. Both GREEN DEVIL helmets list ANSI/ISEA Z89.1-2014, Type I, Class C. A rating stated on the listing is the check that matters, since a helmet with no stated rating gives nothing to check against.
Choose the visor for the job
Mesh visors suit cutting where chips fly: the maker says the metal mesh shield helps prevent cuts and scrapes from branches, flying wood chips and saw dust. The NoCry ships with both visors, a metal mesh visor and a clear polycarbonate face shield. The GREEN DEVIL helmets pair a built-in visor with a mesh face shield, and the Oregon uses a wider stainless steel mesh visor that flips up and down. Flip the visor down before the cut and up between cuts.
Fit the helmet and ear muffs
A helmet that shifts on the head leaves the face and ears uncovered, so fit comes before the cut. The Oregon and both GREEN DEVIL helmets list a 6-point suspension or harness, and both GREEN DEVIL helmets add a chinstrap. The NoCry lists adjustable headgear and fits head sizes from 21.2 to 24.4 in, and the GREEN DEVIL 2910-F lists a size range of 53 to 63 cm, or 20.86 to 24.80 in. The NoCry ear muffs are rated 25.9 dB SNR and meet ANSI S3.19, while the GREEN DEVIL ear muffs meet ANSI S3.19 with no stated noise rating. The Oregon lists articulated cap-mounted ear cups.
Helmets for the cutting jobs above
Each helmet below covers the head, face and hearing protection this guide calls for, with the shell, the visor and the fit checked above.
Safety
Wear the helmet with the visor down and the ear muffs on for the whole cut. Clear sticks, stones and other debris from the work area before the saw starts, and keep children, pets and bystanders away from the cutting area. Refuel the saw only with the engine off and cool, and follow the manual for the saw and the helmet.
FAQ: mowing large lots
What does ANSI Z89.1 Type I mean on a chainsaw safety helmet?
Type I covers top impact, and the rating names the standard the shell meets. The helmets here list ANSI Z89.1-2009 or ANSI/ISEA Z89.1-2014, Type I, with Class C, except the NoCry, whose listing describes it as suitable for Class E, G and C settings.
Mesh visor or clear visor: which one for chainsaw work?
Mesh suits cutting where chips fly, since the maker says the metal mesh shield helps prevent cuts and scrapes from branches, flying wood chips and saw dust. The NoCry ships with both, a metal mesh visor and a clear polycarbonate face shield, so the buyer can switch between them.
How should a chainsaw safety helmet fit?
The suspension should hold the helmet level without shifting, with the chinstrap snug where one is fitted. Measure the head and match it to the stated range: 21.2 to 24.4 in on the NoCry, or 53 to 63 cm on the GREEN DEVIL 2910-F.
Can I wear glasses with a chainsaw safety helmet?
The NoCry listing says the helmet fits over glasses or a mask. For the other helmets here, no such fit is stated, so check the visor clearance before ordering.
More mowing guides
- Chainsaw Safety Gear: What Homeowners Need
- Best String Trimmer for Acreage: 4 Gas and Battery Picks
- Best Backpack Leaf Blower: 3 Gas Picks for Acreage Leaf Cleanup
- How Long Does It Take to Mow an Acre? Times by Mower Type
Browse the trimmer and blower reviews for more yard tools.




