Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cub Cadet XT1 vs John Deere X350: Which One Should You Buy?

Replacement deck belts for the Cub Cadet XT1 and the John Deere X350, compared on deck size, belt length and width, fit and cord, with a verdict for each owner.

Cub Cadet XT1 vs John Deere X350: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RTPOWER 954-05022A Deck Belt for Cub Cadet XT1RTPOWER 954-05022A Deck Belt for Cub Cadet XT19.2/10View on Amazon
  2. 2Autonano M169500 Deck Belt for John Deere X350Autonano M169500 Deck Belt for John Deere X3509.2/10View on Amazon

Verdict: Neither listing here is a lawn tractor. Both are replacement deck belts, one for the Cub Cadet XT1 and one for the John Deere X350, pick the RTPOWER belt for a Cub Cadet XT1 with a 46-inch deck, and the Autonano belt for a John Deere X350 with a 48A deck. This comparison judges the belts only, since neither listing states tractor specs.

A lawn tractor earns its keep on the open ground around the house, and the cub cadet xt1 vs john deere x350 question usually starts there. The listings behind this comparison are narrower than the question: each one is a replacement deck belt for one of the two tractors, not the tractor itself. What follows compares the belts the listings actually sell and helps you order the right belt for the tractor you own.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

The 2 examples

RTPOWER 954-05022A Deck Belt for Cub Cadet XT1

RTPOWER 954-05022A Deck Belt for Cub Cadet XT1

RTPOWER9.2/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A replacement deck belt for the Cub Cadet XT1 LT46 with a 46-inch deck, 108.3 inches long and 1/2 inch wide, with aramid cord, replacing part 954-05022A.

Who it's for: owners of a Cub Cadet XT1 with a 46-inch deck who need a fresh deck belt.

Who should skip it: anyone looking for tractor specs or a belt for a 48-inch deck, where this belt does not fit.

The RTPOWER belt is a replacement deck belt for the Cub Cadet XT1 LT46 with a 46-inch deck. It measures 108.3 inches long and 1/2 inch wide, uses aramid cord, and replaces OEM part 954-05022A. The fit list covers XT1 and XT2 Enduro Series models plus Craftsman, Troy-Bilt and Columbia models with a 46-inch deck, so the buyer must match the model number before ordering. One small mismatch inside the listing: the bullets give the width as 1/2 inch (0.49 inch) while the spec table lists 0.5 inch.

Pros

  • Fits the XT1-LT 46 with a 46-inch deck, plus XT2 models
  • Aramid cord construction stated
  • Length and width stated clearly: 108.3 inches by 1/2 inch
  • Replaces a long list of OEM part numbers, including 954-05022A

Cons

  • A belt, not a tractor: no engine, transmission or cutting-height specs to compare
  • No warranty term is stated
  • No durability figure is stated beyond the aramid cord
  • Fit list is long, so the buyer must match the model number before ordering
Autonano M169500 Deck Belt for John Deere X350

Autonano M169500 Deck Belt for John Deere X350

Autonano9.2/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A secondary deck belt for the John Deere X350 with a 48A deck, 103.5 inches long and 5/8 inch wide, with aramid cord, replacing part M169500.

Who it's for: owners of a John Deere X350 with a 48A deck who need the secondary blade-to-blade belt.

Who should skip it: anyone needing the primary belt, which is part M169485, or a belt for a 46-inch deck.

The Autonano belt is the secondary deck belt for the John Deere X350 with a 48A deck, running blade to blade rather than from the engine to the deck. It measures 103.5 inches long and 5/8 inch wide, uses aramid cord, and replaces OEM part M169500, which the listing notes was superseded by UC39235. The fit list covers the X300 Select Series with a 48A deck, plus the X330 with a 48-inch deck, and the X500 Series with a 48A deck, with X590 fit applying after serial number 110,001. The listing is clear that the primary belt is a different part, M169485, measuring 5/8 inch by 74.8 inches, so a buyer must check the belt routing diagram before ordering.

Pros

  • Fits the X350 with a 48A deck, plus other X300 Select Series models
  • Aramid cord construction stated
  • Length and width stated: 103.5 inches by 5/8 inch
  • Cross-references to Exmark, Oregon and Stens part numbers stated

Cons

  • A belt, not a tractor: no engine, transmission or cutting-height specs to compare
  • Secondary belt only: the primary belt is a different part, M169485
  • No warranty term is stated
  • No weight is stated

Cub Cadet XT1 vs John Deere X350 side by side

Factor Cub Cadet XT1 belt (RTPOWER 954-05022A) John Deere X350 belt (Autonano M169500)
Deck size stated 46 in 48 in (48A deck)
Belt length 108.3 in 103.5 in
Belt width 1/2 in (0.49 in) 5/8 in (0.63 in)
Belt role Deck belt Secondary deck belt, blade to blade
Cord Aramid cord Aramid cord
Replaces 954-05022A M169500, superseded by UC39235
Weight stated 0.5 lb Not stated

Figures are listing stated for the 2 example belts, collected 10 November 2026.

What the listings actually are

Both listings sell a mower deck belt. The RTPOWER listing is a deck belt for the Cub Cadet XT1 LT46 and other 46-inch deck models. The Autonano listing is a secondary deck belt for the John Deere X350 with a 48A deck. A deck belt is a wear part: it stretches, cracks and slips with use, and a fresh belt restores the cut.

That framing matters because a tractor comparison normally turns on engine size, transmission, deck build and cutting heights, and none of those figures appear in either listing. Neither listing states an engine figure, a transmission type or a cutting height range. So this article does not declare a winning tractor. It compares the 2 belts on the figures the listings do state, and it leaves every tractor spec as not stated.

Deck size and fit

Deck size is one figure both listings state clearly, and it is one of the figures that decides which belt fits your tractor. The RTPOWER belt fits the Cub Cadet XT1 LT46 with a 46-inch deck, and its fit list runs long: XT1 and XT2 Enduro Series models, Craftsman T225, T240, T2400, T2800, T3100 and T8200 models, Troy-Bilt Super Bronco 46 models, and the Columbia CYT4622SE. A fit list that long is useful only if you match your own model number against it before ordering.

The Autonano belt fits the John Deere X350 with a 48A deck, and its fit list covers the X300 Select Series with a 48A deck, including the X350, X354, X370, X380, X384, X390 and X394, plus the X330 with a 48-inch deck and the X500 Series with a 48A deck. X590 fit applies after serial number 110,001.

Belt length and width

Length and width are stated for both belts, and the figures differ. The RTPOWER belt measures 108.3 inches long and 1/2 inch wide, with the bullets giving the width as 1/2 inch (0.49 inch). The Autonano belt measures 103.5 inches long and 5/8 inch wide, with the spec table giving the size as 0.63 inch wide by 103.5 inches long. Each length matches its own deck, and a belt of the wrong length will not tension correctly.

Both belts use aramid cord, which the listings state for each. Aramid cord is the reinforcement inside the rubber that resists stretch under load. The RTPOWER listing gives a weight of 0.5 pounds for one belt, while the Autonano listing states no weight, so weight cannot be compared across the 2 belts.

The Autonano listing adds a warning that matters more than any dimension: this is the secondary belt, the blade-to-blade belt on the 48A deck, and the primary deck belt for the same models is a different part, M169485, measuring 5/8 inch by 74.8 inches. Both belts must be in good condition for correct deck operation, and the listing tells the buyer to check the mower belt routing diagram before ordering.

What neither listing states

Neither listing states a warranty term, so both score zero for warranty. Neither listing states a safety feature or certification, so both score zero for safety. Neither listing states a cutting height range, a transmission type or a slope figure, so this article states none of those.

Acreage and terrain fit

RTPOWER 954-05022A

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatTrees and beds

Autonano M169500

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatTrees and beds

Matching It to Your Property

  • The RTPOWER belt fits a 46-inch deck, the size the XT1-LT 46 listing states, a deck that threads between trees, beds and fence posts.
  • The Autonano belt fits a 48-inch deck, the size the X350 48A listing states, a deck that covers open ground in fewer passes.
  • Both belts use aramid cord, which the listings state for each.
  • Keep a spare belt with the tractor in the shed, and match the part number to your deck before ordering.

The Acre Score explained

The Acre Score weighs performance, build quality, value, safety and warranty. A factor the listing does not state scores zero, which is why both examples score zero for safety and warranty. Both belts are scored low for this topic because a belt is a wear part, not a tractor. The RTPOWER belt ranks first because its fit, length, width and weight are all stated; the Autonano belt ranks second because it is only the secondary belt, so a buyer must also check the primary belt, and it states no weight.

Product Acre Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RTPOWER 954-05022A 9.2 16 15 16 0 0
Autonano M169500 9.2 14 14 15 0 0

Each score is a linear conversion of the weighted total onto the 9.2 and 9.8 bounds; more points move a pick up the scale.

Riding mower safety

Never mow a slope steeper than the maximum your manual lists, and mow up and down slopes rather than across. Use the ROPS and seat belt where the machine has them (follow the manual on when a folding ROPS may be lowered), never carry passengers, keep children and pets out of the yard while you mow, and disengage the blades before reversing. Refuel only with the engine off and cool. See CPSC riding lawnmower safety. Read our Safety Disclaimer.

FAQ: mowing large lots

Are these belts the tractors themselves?

No. Both listings sell a replacement deck belt, not a lawn tractor. The RTPOWER belt fits the Cub Cadet XT1 LT46 with a 46-inch deck, and the Autonano belt fits the John Deere X350 with a 48A deck. Neither listing states tractor specs.

Which belt fits a Cub Cadet XT1 with a 46-inch deck?

The RTPOWER 954-05022A belt. The listing states it fits the XT1-LT 46 with a 46-inch deck, measures 108.3 inches long and 1/2 inch wide, and replaces OEM part 954-05022A. Match your model number against the fit list before ordering.

What is a secondary deck belt?

On the John Deere 48A deck, the secondary belt runs blade to blade, while the primary belt runs from the engine to the deck. The Autonano M169500 is the secondary belt, measuring 103.5 inches long and 5/8 inch wide, and the primary belt is a different part, M169485, measuring 5/8 inch by 74.8 inches. Both belts must be in good condition.

Can the X350 belt fit a 46-inch deck?

No, not by the listing. The Autonano belt is stated for the X350 with a 48A deck, and its length of 103.5 inches and width of 5/8 inch match that deck. A belt of the wrong length will not tension correctly, so check your deck size and the belt routing diagram before ordering.

More mowing guides

More buying guides