Half Moon Edger vs Stick Edger: Which One Should You Buy?
A half moon edger is a manual blade you step on; a stick edger is powered. This guide compares the two styles and the four half-moon edgers in the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
MANXRKUI Manual Half Moon Edger with 41-Inch Handle9.6/10View on Amazon - 2
One-Piece 40in Manual Edger Lawn Tool with Spring Steel Blade9.6/10View on Amazon - 3
Jardineer Manual Half Moon Edger with Dual V-Shaped Blade9.6/10View on Amazon
A half moon edger is a manual half-moon blade you step on to cut a clean edge along a sidewalk or bed, while a stick edger is a powered edging tool. Half moon edger vs stick edger comes down to this: the half-moon side is quiet, needs no fuel and cuts with foot pressure, while the stick side runs on power. This guide compares the two styles, then the four half-moon edgers in the listings.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Half moon edger vs stick edger: pick the right tool
| Tool | Best for | Limit |
|---|---|---|
| Half-moon edger | Straight lines and curved beds, sidewalks and driveways | Foot-powered, one cut at a time |
| Stick edger | Powered edging along long runs | Needs power and makes noise |
The half-moon edger suits finishing work: defining lawn edges, maintaining garden beds and keeping landscaping borders neat. The listings describe it as a quiet alternative to gas-powered edging tools, with no fuel, noise or emissions. For powered options, see our electric vs gas lawn edger guide.
The gear: four half-moon edgers
The four half-moon edgers in the listings rank like this. First is the Colwelt example, which cuts 5.5 inches down, deeper than the 2 to 4 inch limit the listing says half-moon edgers often have, with a V-shape sawtooth blade and a footplate 6.3 inches wide and 6.7 inches high. Second is the GlimHirVox GHVELT001 example at 40 inches, with a double V-shaped serrated blade, a foot lever, a 400 lbs load rating and a 2 Years warranty. Third is the Root Slayer example at 39.25 inches, with a powder-coated carbon steel blade, an inverted V cutting tip and a Lifetime warranty. Fourth is the GlimHirVox GHVELT0001 example, the same double V blade and 400 lbs load as its sibling, but its title says 41 inches while its bullets say 40 inches, and it states no warranty.
| Edger | Length | Weight | Cut | Warranty |
|---|---|---|---|---|
| Colwelt C071 | 40 in | Not stated | 5.5 in down | Not stated |
| GlimHirVox GHVELT001 | 40 in | 3.5 pounds | Not stated | 2 Years |
| Root Slayer 22611 | 39.25 in | 4.8 pounds | Not stated | Lifetime |
| GlimHirVox GHVELT0001 | 41 in title, 40 in bullets | 3.5 pounds | Not stated | Not stated |
All four are manual tools with no motor, battery or cord. See our best manual lawn edger roundup for more manual options.
How to use a half-moon edger
Line the edger up where the lawn meets the bed, step it down, and rock it back and forth. That is the method the Colwelt listing describes, and the other listings agree on the motion: push the blade into the soil with foot pressure, using the footrest or footplate to lever your body weight. The GlimHirVox examples add an extra-wide anti-slip footrest and a foot lever, and the Colwelt example has a large anti-slip foot tread. Work along straight lines or smooth curves, and lift the blade out before moving to the next cut.
Cutting depth
Depth is where the Colwelt example stands out: it cuts 5.5 inches down into the under layer, breaking through deeper roots, while the listing says half-moon edgers often have a limit of about 2 to 4 inches. The other three listings state no cutting depth. A deeper cut suits renewing neglected edges and expanding flower beds, where the edge has grown over; a shallow cut suits touching up an edge that is already defined.
Length and weight
Three of the four state a length near 40 inches: the GlimHirVox GHVELT001 example at 40 inches, the Colwelt example at 40 inches, and the Root Slayer example at 39.25 inches. The GlimHirVox GHVELT0001 example is the odd one: its title says 41 inches while its bullets say 40 inches. The spec tables for both GlimHirVox examples list 15.5 by 8.1 by 1.7 inches, which does not match a 40 inch tool, so this guide uses the bullets’ figures. Weights are 3.5 pounds for both GlimHirVox examples and 4.8 pounds for the Root Slayer example; the Colwelt example states no weight.
Blades and build
All four use a serrated or sawtooth blade. The Root Slayer example has a sharpened V-shaped point with aggressive serrated teeth in powder-coated carbon steel, on a resin-encased steel shaft with a non-latex grip. The GlimHirVox examples use a one-piece forged double V-shaped serrated blade in manganese steel with a triple protective layer, and a soft T-shaped handle. The Colwelt example uses a V-shape sawtooth blade in solid steel with a cushioned T-handle. The GlimHirVox listings claim the blade saves more than 50% of effort against a flat shovel; that is the maker’s claim.
Safety
Wear sturdy shoes and gloves. Clear sticks, stones and other debris before you step on the blade, and keep children, pets and bystanders away from the work area. Step straight down on the footrest or footplate, and check the locking clips after assembly: the GlimHirVox listings note reinforced locking clips that keep the tool from shaking after assembly.
FAQ: mowing large lots
What is a half moon edger?
A manual edging tool with a half-moon blade you step on to cut a clean edge along sidewalks, driveways and flower beds. It needs no fuel, electricity or battery.
Is a half moon edger better than a stick edger?
It depends on the job. A half-moon edger is quiet and needs no fuel, which suits finishing touches and small borders. A stick edger runs on power, which suits long runs. The listings here cover half-moon edgers only.
How deep does a half moon edger cut?
The Colwelt example cuts 5.5 inches down. The listing says half-moon edgers often have a limit of about 2 to 4 inches. The other three examples state no cutting depth.
Can a half moon edger cut through roots?
The listings say the serrated blades cut through compact soil, turf and shallow roots. The Colwelt example claims its blade breaks through deeper roots at 5.5 inches down.
Do I need to bend over to use a half moon edger?
No. The GlimHirVox examples are 40 inches in length and let you edge while standing upright, with a footrest to lever your body weight.
More mowing guides
- Best Manual Lawn Edger (2026): 5 Picks Compared
- Best Lawn Edger for Sidewalks (2026): 5 Picks Compared
- Best Lawn Edger for Flower Beds (2026)
- Stick Edger vs Wheeled Edger: Which One Should You Buy?
- String Edger vs Blade Edger: Which One Should You Buy?
- Electric vs Gas Lawn Edger: Which One Should You Buy?
- Best Push Lawn Edger (2026): 5 Picks for Clean Borders




