Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Change Drive Belt on Craftsman Riding Mower

A plain guide to changing the upper drive belt on a Craftsman riding mower, from parking the mower to routing the new belt and checking the drive.

How to Change Drive Belt on Craftsman Riding Mower
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Autoverve 954-05040 Upper Drive Belt, 35.25 inAutoverve 954-05040 Upper Drive Belt, 35.25 in9.7/10View on Amazon
  2. 2Riodrive 954-05040 Upper Drive Belt, 5/8 in x 35.25 inRiodrive 954-05040 Upper Drive Belt, 5/8 in x 35.25 in9.6/10View on Amazon
  3. 3Wanotine 954-05040 Upper Drive Belt, 5/8 in x 35.25 inWanotine 954-05040 Upper Drive Belt, 5/8 in x 35.25 in9.6/10View on Amazon
  4. 4UDC GX20072 Deck Belt, 1/2 in x 104 inUDC GX20072 Deck Belt, 1/2 in x 104 in9.4/10View on Amazon

A riding mower that creeps along, slips under load or refuses to move while the engine runs fine often has a worn drive belt. This guide explains how to change drive belt on craftsman riding mower models that use an upper drive belt, from parking the mower to routing the new belt and checking the drive.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Autoverve 954-05040 Upper Drive Belt, 35.25 in

Autoverve 954-05040 Upper Drive Belt, 35.25 in

Autoverve9.7/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Upper drive belt for selected Craftsman, Troy-Bilt and Cub Cadet riding mowers, with a lifetime warranty and 24-hour support.

The Autoverve 954-05040 is an upper transmission belt, 35.25 in long with a 0.656 in top width as the official reference size. It replaces 954-05040, 754-05040, 954-0241A and 754-0241A, and fits selected Craftsman, Troy-Bilt, Cub Cadet, MTD and Murray models. The listing states a lifetime warranty with 24-hour support.

Pros

  • Lifetime warranty and 24-hour support stated
  • Official reference size, 35.25 in by 0.656 in
  • Reinforced tensile construction controls stretching
  • Fits listed Craftsman, Troy-Bilt, Cub Cadet, MTD and Murray models

Cons

  • 0.656 in top width differs from the 5/8 in width of the other drive belts
  • Some applications fit only specific model numbers
  • Belt weight is not stated
  • No stated service life
Riodrive 954-05040 Upper Drive Belt, 5/8 in x 35.25 in

Riodrive 954-05040 Upper Drive Belt, 5/8 in x 35.25 in

Riodrive9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Kevlar upper drive belt for Craftsman, Troy-Bilt and MTD riding mowers, sized 5/8 in by 35.25 in.

The Riodrive 954-05040 is an upper drive belt, 5/8 in by 35.25 in, with a Kevlar cord and neoprene with short Kevlar filaments. Built to OEM specifications, it replaces 954-05040, 954-0241A and 754-0241 and fits the Craftsman models listed. One contradiction: the title and bullets give 35.25 in, while the spec table gives 35.0 in, so trust the title and bullets.

Pros

  • Kevlar cord with neoprene for resilience
  • Built to OEM specifications, per the listing
  • Multi-weave structure with a reverse-seam design
  • Fits the listed Craftsman R110, T110, T1000 and R1000 models

Cons

  • No warranty term is stated
  • No stated service life
  • Fits selected MTD 700 Series tractors only as listed
Wanotine 954-05040 Upper Drive Belt, 5/8 in x 35.25 in

Wanotine 954-05040 Upper Drive Belt, 5/8 in x 35.25 in

Wanotine9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Upper drive belt for Craftsman, Troy-Bilt, MTD and Cub Cadet riding mowers, sized 5/8 in by 35.25 in.

The Wanotine 954-05040 is an upper drive belt, 5/8 in by 35 1/4 in, sold as 1 pc, replacing 754-05040, 954-0241 and 954-0241A. It fits the Craftsman models listed, plus Troy-Bilt, MTD 700 Series, Cub Cadet CC30, Huskee LT4200 and Murray models. Title, bullets and spec table agree on 35.25 in, but no cord material, construction detail or warranty term is stated.

Pros

  • Stated size of 5/8 in by 35 1/4 in
  • Lists the Craftsman R110, T110, T1000 and R1000 models
  • Package includes 1 pc upper drive belt
  • Title, bullets and spec table agree on 35.25 in

Cons

  • No warranty term is stated
  • No construction or cord material is stated
  • No stated service life
  • Fitment is limited to the models listed
UDC GX20072 Deck Belt, 1/2 in x 104 in

UDC GX20072 Deck Belt, 1/2 in x 104 in

UDC Mower Belts9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Deck belt for a John Deere 42 in deck, sized 1/2 in by 104 in, with aramid cords and one year of product support.

The UDC GX20072 is a deck belt, not a drive belt: 1/2 in by 104 in for a John Deere 42 in deck, on models such as the D110, L110, D105, E100 and D130. It has aramid tensile cords, a natural rubber body and a two-layer wrapping cover, with one year of product support. One contradiction: the bullets give 103.7 in, the spec table 103.875 in, against 104 in in the title, so trust the title figure.

Pros

  • Aramid tensile cords, natural rubber body, two-layer wrapping cover
  • One year of product support stated
  • Replaces GX20072, UC32283 and GY20570
  • Stated size of 1/2 in by 104 in

Cons

  • A deck belt, not a drive belt, so it does not fit the drive route
  • Fits John Deere models only
  • No stated service life

Other machines to compare

How to change drive belt on craftsman riding mower: the short answer

Park on flat ground, set the brake, remove the key and let the engine cool. Note the routing of the upper drive belt around each pulley and guide, release the tension, slip the old belt off, fit the new belt along the same route, restore the tension and refit the covers. Then engage the drive gently and check that the mower moves smoothly without slipping or squealing.

When to change the belt

A worn upper drive belt can cause sluggish movement, slipping, hesitation, squealing, inconsistent ground speed, or a mower that will not move correctly even though the engine runs. Change the belt when it shows cracks, frayed edges, glazing, exposed cords, stretching or heat damage, and inspect the pulleys, bearings, guides and tension parts at the same time.

Park the mower and make it safe

Park on flat, dry ground away from slopes, ditches and the road. Set the parking brake, remove the key and let the engine cool before reaching near the belt and pulleys. Keep children, pets and bystanders away, keep hands clear of pulleys and pinch points, and wear eye protection and sturdy shoes.

Find the belt and note the routing

The upper drive belt runs between the engine pulley and the transmission, with idlers and guides setting the route. Before removing anything, note which side of each pulley and guide the belt touches, and sketch the path or take a photo. Check the original belt number and the exact mower model number before ordering, since brand name, mower family or deck width alone cannot confirm fitment.

Release the tension and remove the old belt

Release the tensioner or idler that holds the belt tight, then slip the belt off the pulleys in turn, working from the loosest point. Keep the old belt intact so its length and width can be checked against the new belt, and clear packed grass or debris from the pulley grooves while the belt is off.

Fit the new belt and check the routing

Fit the new belt along the noted route, seating it fully in each pulley groove and around each guide. Some of the upper drive belts here measure 5/8 in wide and 35.25 in long, while the Autoverve listing gives an official reference size of 35.25 in long and 0.656 in top width. Check the belt number, the exact model number and the belt position before fitting: a deck belt is a different part, and the UDC listing below is a deck belt for a John Deere 42 in deck. See the guide on deck belt vs drive belt for the difference.

The belts for this job

The routing step needs the right upper drive belt for the model, so the gear section below covers all 4 belts in the set, with the stated size and fitment for each.

Tension, refit and check the drive

Restore the tensioner so the belt sits snug in the grooves without slack hanging off the pulleys, then refit the covers and guards. Start the engine, engage the drive gently and check that the mower moves smoothly forward and back, with steady speed and no squealing or slipping. If the mower hesitates or the belt slips, stop, let the engine cool and recheck the routing and tension.

Safety

Work with the engine off and cool, the brake set and the key out, and never reach near pulleys while the engine runs. Keep children, pets and bystanders away while the belt is off, and follow the manual for the routing and tension on the exact model.

FAQ: mowing large lots

What are the signs the drive belt needs changing?

Sluggish movement, slipping, hesitation, squealing or inconsistent ground speed point to a worn belt, especially when the engine runs fine but the mower will not move correctly. Cracks, frayed edges, glazing, exposed cords, stretching or heat damage mean the belt should be changed.

What size is the upper drive belt for a Craftsman riding mower?

For the 954-05040 upper drive belt, the Riodrive and Wanotine listings give 5/8 in wide and 35.25 in long, while the Autoverve listing gives an official reference size of 35.25 in long and 0.656 in top width. Size alone does not confirm fitment, so match the original belt number and the exact mower model number.

Is a deck belt the same as a drive belt?

No. A deck belt drives the blades under the deck, while the upper drive belt carries power from the engine to the transmission that moves the mower. The UDC GX20072 below is a deck belt sized 1/2 in by 104 in for a John Deere 42 in deck, so it does not fit the drive route.

Can the drive belt be changed without removing the deck?

Access varies by model, and the manual for the exact model shows the route and the panels or deck parts to remove. Note the routing before removing the old belt, and check the belt number, model number and belt position before fitting the new belt.

How long does a new drive belt last?

There is no stated service life in the listings, so change the belt when it shows wear rather than on a set schedule. Cracks, frayed edges, glazing, exposed cords, stretching, slipping or heat damage are the signs to watch for.

More mowing guides

More buying guides