How to Change Riding Lawn Mower Oil
Drain the old oil, swap the filter, refill to the dipstick mark and check for leaks: an oil change for a riding mower.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
John Deere Double Oil Change Kit, 4 qt oil, 2 filters9.5/10View on Amazon - 2
Briggs & Stratton 5431K Oil Extractor Kit, 4.0 L9.5/10View on Amazon - 3
Pro Chaser Tune-Up Kit for Husqvarna Mowers9.4/10View on Amazon - 4
Kawasaki 10W-40 Oil Change Kit, 2 qt, 1 filter9.3/10View on Amazon
After a season of mowing, the oil in a riding mower turns dark with use, and the engine works harder than it should. Learning how to change riding lawn mower oil takes an afternoon in the driveway and a few parts, and it keeps the engine running for seasons to come. This guide walks through the drain, the filter swap and the refill, with the gear that handles each step.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

John Deere Double Oil Change Kit, 4 qt oil, 2 filters
A double oil change kit with 4 quarts of oil and 2 filters for John Deere riding mowers, with a 6-month warranty.
Who it's for: owners of John Deere riding mowers who want a double change in one box.
Who should skip it: anyone whose mower is not on the fitment list, or anyone who wants the oil viscosity stated on the listing.
The John Deere kit covers a double oil change: 4 quarts of oil and 2 filters, with genuine John Deere parts. The fitment list names D100 to X324 series models. The listing states a 6-month warranty and a weight of 8.7 pounds.
Pros
- 4 quarts of oil and 2 filters in one kit
- Genuine John Deere parts
- Fits D, L, LA, LT, LX, S and X series mowers
- 6-month warranty stated
Cons
- No oil viscosity stated
- Long fitment list to check against your model
- Weighs 8.7 pounds
- 2 filters and 4 quarts to store between changes

Briggs & Stratton 5431K Oil Extractor Kit, 4.0 L
A 4.0-liter oil extractor kit with a 51-inch hose that pulls oil out through the dipstick tube.
Who it's for: owners who want to change oil without crawling under the mower or removing a drain plug.
Who should skip it: anyone who wants the oil and filter in the same box, or anyone who wants powered suction instead of a manual pump.
The Briggs & Stratton extractor pulls oil out through the dipstick tube, so there is no tipping the mower and no drain plug to remove. The 4.0-liter tank holds a full oil change in one pass, and the 51-inch hose reaches deep dipstick tubes. The kit includes the reservoir, a manual siphon pump, a suction tube, a funnel and a sealing cap.
Pros
- 4.0-liter tank handles a full oil change in one pass
- 51-inch hose reaches deep dipstick tubes
- No tipping the mower and no drain plug to remove
- Kit includes reservoir, pump, tube, funnel and cap
Cons
- No powered suction, the pump is manual
- Warranty reads 'As labelled' with no term stated
- No oil or filter included
- Tank, hose and pump to store after use

Pro Chaser Tune-Up Kit for Husqvarna Mowers
A tune-up kit with air, oil and fuel filters, clamps and spark plugs for Husqvarna riding mowers.
Who it's for: owners of the listed Husqvarna mowers who want filters and plugs in one box.
Who should skip it: anyone who needs oil with the kit, or anyone whose mower is not on the fitment list.
The Pro Chaser kit covers a full tune-up: an air filter, a pre-filter, an oil filter, 2 fuel filters, 2 clamps and 2 spark plugs. The air filter measures 125 mm, 5 inches, and the oil filter replaces part numbers 7045184, 492056 and 492932. The listing names Husqvarna YTH, Z254, Z246 and YTA series mowers. The listing states a 90-day warranty.
Pros
- Air, oil and fuel filters plus clamps and spark plugs in one kit
- Air filter measures 125 mm, 5 inches
- Fits Husqvarna YTH, Z254, Z246 and YTA series, per the listing
- 90-day warranty stated
Cons
- No oil included
- No stated oil capacity or viscosity
- Fits specific Husqvarna and John Deere models only, so check yours
- 90-day warranty, shorter than the 6-month term on the John Deere kit

Kawasaki 10W-40 Oil Change Kit, 2 qt, 1 filter
A 10W-40 oil change kit with 2 quarts of oil and 1 oil filter for Kawasaki engines.
Who it's for: owners of Kawasaki engines who want the oil and filter in one box.
Who should skip it: anyone who wants a stated fitment list or a stated warranty term before buying.
The Kawasaki kit keeps the oil change simple: 2 quarts of 10W-40 oil and 1 oil filter, with the part numbers stated on the listing. The kit measures 9.0 by 9.0 by 6.0 inches. The listing has no bullets, so it states little beyond the oil, the filter and the size.
Pros
- 10W-40 oil and 1 filter in one kit
- 2 quarts of oil for the change
- Filter and oil part numbers stated on the listing
- Compact 9.0 by 9.0 by 6.0 inch kit
Cons
- No bullets, so the listing states little beyond the parts
- No weight stated
- No warranty term stated
- No fitment list stated, so check your engine before buying
Other machines to compare
Lucas Oil 11315 Lawn Mower Motor Oil SAE 30Check price on Amazon
Lucas Oil 11313 SAE 10W-30 Lawn Mower Motor OilCheck price on Amazon
Lucas Oil 11314 Lawn Mower Motor Oil SAE 10W-40Check price on Amazon
MaxWorks 50965 Low Profile 8.5 QuartCheck price on Amazon
Amarine Made Oil PumpCheck price on Amazon
Fuel Shut Off Valve for MowerCheck price on Amazon
How to change riding lawn mower oil: what you need first
Start with the manual for your mower. It states the oil viscosity and the amount the engine holds, and it shows where the drain plug and the filter sit. Gather the gear first: an oil change kit, a drain pan or an extractor, a funnel, rags and gloves. Park on level ground.
Warm up and park
Run the engine for a short while so the oil warms and flows, then park on level ground and switch the engine off. Warm oil drains faster than cold oil, and it carries dirt out with it.
Drain the old oil
Set a drain pan under the drain plug, or slide the extractor hose down the dipstick tube. Open the plug and let the oil drain out, or pump it out with the extractor until the flow stops. The Briggs & Stratton extractor pulls oil through the dipstick tube, so there is no plug to remove and no tipping the mower. See the oil drain pan guide for pans that fit.
Swap the filter
Unscrew the old filter by hand or with a filter wrench, and let it drain into the pan. Smear fresh oil on the new filter seal, then screw it on by hand until it seats and follow the manual for the final turn. The kits below carry a filter for the change.
Refill and check the level
Pour fresh oil in through the filler, a little at a time, and check the dipstick between pours. Fill to the mark on the dipstick, not above it, and wipe the dipstick clean before each check. Start the engine and let it run for a short while, then switch it off, check the dipstick again and top up to the mark if needed, and look under the mower for drips around the plug and the filter.
Clean up and store the used oil
Pour the used oil from the pan or the extractor into a sealed container, and wipe up any spills with rags. Take the used oil and the old filter to a collection point, and never pour oil on soil or into drains.
Gear for the oil change
The extractor pulls the old oil out through the dipstick tube, and the kits below carry the oil and filters for the refill.
Safety
Wear gloves and eye protection, and keep children and pets out of the work area. Work with the engine off, and keep clear of hot parts around the exhaust. Keep used oil in a sealed container and take it to a collection point. If the drain plug or filter will not move, contact the maker or a repair shop instead of forcing it.
FAQ: mowing large lots
How often should I change riding mower oil?
Follow the interval in your mower’s manual. A fresh change at the start of the season sets the engine up.
What oil does a riding mower use?
The manual states the viscosity and amount for your engine. The Kawasaki kit (on Amazon) here uses 10W-40 oil, and the John Deere kit (on Amazon) uses the oil in the TY22029 bottles.
Can I change the oil without removing the drain plug?
Yes. The Briggs & Stratton extractor pulls oil out through the dipstick tube, so there is no drain plug to remove and no tipping the mower. See the hand versus electric extractor comparison.
Do I need to change the filter with the oil?
Change the filter with the oil when your engine has a replaceable filter. The kits here include a filter: the Kawasaki kit holds 1 filter, the John Deere kit holds 2, and the Pro Chaser kit holds 1 oil filter. Follow the manual for your engine.
Where does the used oil go?
Pour it into a sealed container and take it to a collection point. Never pour used oil on soil or into drains.




