How to Take Off a Mower Blade Safely
A step-by-step plan for taking a mower blade off safely: park, lift, lock the blade, loosen the bolt and check the blade before it goes back on.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
American Lawn Mower 1204-14 14-Inch 4-Blade Push Reel LawnView on Amazon - 2
Maxpower 331528B USA MADE 21" Cut Mulching Blade For 21" CutView on Amazon - 3
Oregon Universal Precision Mower Blade BalancerView on Amazon - 4
MaxPower 331376XB USA MADE Commercial Mulching Mower BladeView on Amazon
After a season of mowing thick grass on slopes and around trees, the blade on your mower dulls and the cut turns ragged. Learning how to take off a mower blade lets you sharpen it or fit a new one without a trip to the shop. Park the mower on flat ground, shut the engine off, lock the blade so it cannot turn, loosen the bolt that holds the blade, and lower the blade away from the deck. A blade lock or clamp holds the blade still while you work, so the bolt comes loose without the blade spinning.
Other machines to compare
American Lawn Mower 1204-14 14-Inch 4-Blade Push Reel LawnCheck price on Amazon
Maxpower 331528B USA MADE 21" Cut Mulching Blade For 21" CutCheck price on Amazon
Oregon Universal Precision Mower Blade BalancerCheck price on Amazon
MaxPower 331376XB USA MADE Commercial Mulching Mower BladeCheck price on Amazon
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
How to take off a mower blade: hold the blade still
| Tool | Best for | Limit |
|---|---|---|
| Adjustable blade holder | Walk-behind and riding mowers with different blade widths | Check the fit against your blade width first |
| Deck clamp lock | Clamping to the deck so the blade cannot rotate | Needs a deck edge the clamp can grip |
| Two-blade coupler | Riding mowers with two blades, locks both at once | Fits blades 2 3/4 inches wide and less |
| Two-pack deck clamp | A spare clamp on hand, with thread protector caps | Each tool measures 6 x 2 x 1.79 inches |
Most acreage owners already own a socket set and gloves. The locking tool is the one extra piece. The lawn mower blade bolt size guide lists bolt sizes by brand.
Step 1: park the mower and shut it off
Park on flat, level ground and set the parking brake. Shut the engine off and let it cool before you reach under the deck. Remove the key if your mower has one, and keep children and pets out of the work area. Clear sticks, stones and clippings from around the deck so nothing shifts while you work.
Step 2: lift the mower and secure it
Raise the mower enough to reach the blade bolt, and secure it so it cannot drop while you work. The maker lists raising the mower 4 inches or more for best use. Use a jack or ramps rated for the mower, chock the wheels, and never work under a mower held up by a jack alone.
Step 3: lock the blade so it cannot turn
Fit the locking tool to the blade and the deck before you touch the bolt. An adjustable holder grips blades of different widths, while a deck clamp locks the blade to the deck so it cannot rotate. The VoltRidge clamp (on Amazon) fits mower decks up to 42 inches, and the KSWLOR clamp (on Amazon) fits the same deck width on walk-behind and riding mowers. Tighten the clamp until the blade holds firm, then check it with a light push before you reach for the wrench.
Step 4: loosen the bolt and lower the blade
Loosen the blade bolt in the direction your manual states. Most bolts loosen counterclockwise, but some mowers use a reverse thread, so do not force it the wrong way. Let the lock hold the blade steady, and keep your hands clear of the cutting edge. Once the bolt is free, lower the blade straight down and set it on a flat surface, edge away from you. Note which side faced down so the blade goes back the same way.
Step 5: check the blade before it goes back on
Look the blade over for bends, cracks and heavy wear along the edge. A blade balancer shows whether the blade is balanced after sharpening. The VoltRidge tool includes a balancer that detects unbalanced or deformed blades. If the edge is thin, cracked or bent, fit a new blade instead of sharpening the old one. See the best way to sharpen lawn mower blades guide for the sharpening pass.
Pick the right blade lock for your mower
Match the tool to the deck and the blade. Clamps built for the 490-850-0005 pattern list MTD, Troy-Bilt, Cub Cadet, Bolens, Ryobi, Yard Man and Yard Machines models, so check your model against the fit list before ordering. The standard Bladz-Lok coupler fits blades 2 3/4 inches wide and less, and locks 2 riding mower blades together at once. The Otoolling set comes as a 2-pack, with 3 thread protector caps that shield the threaded parts from dust. The Stens 750-058 lock clamps (on Amazon) to the deck and carries a 1-year warranty, while the Bladz-Lok standard coupler carries a 5-year warranty.
What to do with the blade after it comes off
Sharpen the blade or fit a new one while it is off the mower. A sharp edge cuts clean and leaves the grass tips even. A dull edge tears them. The mower blade sharpener picks cover sharpeners for riders and large lawns, and the are lawn mower blades universal guide explains fit across brands. Balance the blade after sharpening so it spins true, then refit it the same way it came off and tighten the bolt to your manual’s setting.
Safety
Wear gloves and eye protection before you reach under the deck. Keep hands clear of the cutting edge at all times, and keep children and pets out of the yard while the blade is off. Work with the engine off and cool, and refuel only with the engine off and cool. If the mower feels unstable on the lift, lower it and reset the supports before you continue.
FAQ: mowing large lots
What size blade lock fits my mower?
Check the deck width and the blade width first. Clamps such as the VoltRidge and KSWLOR tools fit mower decks up to 42 inches, and the standard Bladz-Lok coupler fits blades 2 3/4 inches wide and less. Measure the blade before ordering, since the coupler will not fit blades wider than that.
Do I need to remove the mower deck to take off a blade?
No. A blade lock clamps the blade in place under the deck, so the bolt comes off with the deck still on the mower. The Bladz-Lok coupler is made to work without removing the deck, and the Ximoon lock (on Amazon) works the same way with a jack lifting the rear of the tractor.
How do I keep the blade from turning while I loosen the bolt?
Lock the blade to the deck with a blade lock or clamp. The tool holds the blade steady so the bolt turns without the blade spinning, and the job becomes a one-person task. Adjustable holders grip different blade widths, and deck clamps grip the deck edge.
Can I take off a mower blade by myself?
Yes. Blade locks are made for one-person blade changes: the clamp holds the blade while you loosen the bolt, so no extra help is needed. The Otoolling deck clamp (on Amazon) states the same, and its 2-pack leaves a spare tool in the box.
What comes with a blade lock kit?
It depends on the kit. The Otoolling set includes 2 blade lock tools and 3 thread protector caps. Other kits ship a single clamp, so check the box contents before ordering if you want caps or a spare.
More mowing guides
- Lawn Mower Blade Bolt Size Guide: Sizes by Brand
- Are Lawn Mower Blades Universal?
- Lawn Mower Blade Sizes: Fit Chart
- Best Way to Sharpen Lawn Mower Blades: A Step-by-Step Guide
Browse the mower maintenance guides for schedules and checklists for the rest of the season.




