Lawn Mower Blade Bolt Size Guide: Sizes by Brand
Lawn mower blade bolt sizes by brand: stated thread sizes for EGO, Honda and rotary cutter blades, how to measure your bolt, and kits that fit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Joytrace 304 Stainless Steel Blade Bolt Set for Honda, 10x25mm, 2-Pack9.6/10View on Amazon - 2
GUEMORVE Lawn Mower Blade Bolt and Lock Nut Kit for EGO, 2-Pack9.6/10View on Amazon - 3
Yoursme 63607 Rotary Cutter Blade Bolt Kit, 2 Pack with Nuts and Washers9.5/10View on Amazon - 4
Sounrui Blade Bolt and Fan Hardware Kit for EGO 21-Inch Mowers9.4/10View on Amazon
A blade that will not come off usually stops the job at one stubborn fastener, and the lawn mower blade bolt size is the first thing to match before you order parts. There is no single size: one EGO kit in this guide states 1/4-20 while the other states no thread size, the Honda kit states 10x25mm, and the rotary cutter kit states a 1-1/8 inch thread diameter.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Joytrace 304 Stainless Steel Blade Bolt Set for Honda, 10x25mm, 2-Pack
A 10x25mm stainless hex bolt and washer set for Honda walk-behind mowers, handling the blade fastener step of a blade change.
Who it's for: Honda owners who need the stated 10x25mm blade bolt for a blade change.
Who should skip it: owners of other brands, since the fit list names Honda models only.
The maker lists a 10x25mm hex bolt (90105-VA3-J01) and a 10mm washer (90502-VG3-000) in 304-grade stainless steel. Compatibility names Honda HRX217, HRS216 and HRR216 mowers among others. Each set includes 2 bolts and 2 washers.
Pros
- Stated 10x25mm hex bolt size with Honda part numbers
- 304-grade stainless steel with a phosphate coating
- Maker states resistance under 250 ft-lbs torque
- 2 bolts and 2 washers cover a blade change plus a spare
Cons
- Fits the named Honda models only, not other brands
- No lock nuts are included in the set
- No warranty term is stated
- Washer size is 10mm, so other washer sizes need a separate order

GUEMORVE Lawn Mower Blade Bolt and Lock Nut Kit for EGO, 2-Pack
A 1/4-20 blade bolt and lock nut kit for EGO 21-inch mowers, handling the blade fastener step when blades come off for sharpening.
Who it's for: EGO 21-inch mower owners replacing blade bolts and lock nuts during blade service.
Who should skip it: owners who need blades in the box or run a different brand.
The maker lists blade bolt 5640321002 and lock nut 5630351002 in hardened steel, size 1/4-20, for EGO 21-inch mowers. The kit includes 2 bolts and 2 nuts for dual diamond-shaped blade holes. Blades are not included.
Pros
- Stated 1/4-20 size with EGO part numbers
- Hardened steel bolts and lock nuts in a 2-pack
- Fits the dual diamond-shaped holes on compatible 21-inch blades
- Installs with a wrench, no special tools stated
Cons
- Blades are not included, hardware only
- Fits the named EGO 21-inch models only
- No washers are included in the kit
- No warranty term is stated

Yoursme 63607 Rotary Cutter Blade Bolt Kit, 2 Pack with Nuts and Washers
A rotary cutter blade bolt kit with stated thread, shoulder and head dimensions, handling the blade bolt step on brush cutters.
Who it's for: rotary cutter owners matching the 63607-family bolt dimensions.
Who should skip it: walk-behind mower owners, since this hardware is sized for rotary cutter decks.
The maker lists a 1-1/8 inch thread diameter, 2-1/2 inch bolt length, 1-1/2 by 1/2 inch shoulder, 2-1/2 by 1/2 inch head and a 1/4 inch key. The kit includes 2 bolts, 2 lock washers and 2 jam nuts for Bush Hog and Land Pride cutters. Nut torque is stated at 600 ft. lbs.
Pros
- Full stated dimensions: thread, length, shoulder, head and key
- Heat treated bolts with hardened lock washers and jam nuts
- Replaces part numbers including 63607, 7919, 252BH and 20322
- Maker states a 600 ft. lbs. nut torque for this hardware
Cons
- Built for rotary cutters, not walk-behind mower decks
- Fit depends on matching the shoulder and key dimensions
- No warranty term is stated
- Deck access through an inspection hole is required for removal

Sounrui Blade Bolt and Fan Hardware Kit for EGO 21-Inch Mowers
A complete EGO blade hardware kit with fan, center flange bolt, washer, support bolts and nuts for a full blade service.
Who it's for: EGO owners who want the fan and full hardware set in one kit.
Who should skip it: buyers who need a stated thread size to match an unlisted model.
The maker lists 1 drive fan, 1 center flange bolt, 1 washer, 2 support bolts and 2 hex lock nuts for EGO 21-inch mowers. The bolts and nuts are stated as high-strength steel. No thread size is given, so match by model.
Pros
- Complete kit: drive fan, center flange bolt and washer included
- 2 blade support bolts and 2 hex lock nuts in the box
- High-strength steel bolts and lock nuts are stated
- Fits the named EGO LM2100, LM2101, LM2130 and LM2150SP 21-inch models
Cons
- No bolt size figure is given for measuring against
- Fits the named EGO 21-inch models only
- Single kit count, no spare bolts beyond the set
- No warranty term is stated
Lawn mower blade bolt size by brand
Blade bolt sizes are brand and model specific. The table below repeats the size each kit states, with the models it names. If your mower is not named, measure the old bolt before you order.
| Kit | Stated bolt size | Fits |
|---|---|---|
| joytrace Bolt Set | 10x25mm hex bolt, 10mm washer | Honda HRX217, HRS216, HRR216 and more |
| GUEMORVE EGO Bolt Kit | 1/4-20 | EGO LM2130, LM2133, LM2150SP and more |
| Yoursme 63607 Bolt Kit | 1-1/8 inch thread diameter | Bush Hog, Land Pride and other rotary cutters |
| Sounrui EGO Kit | Not stated | EGO 21-inch mowers, LM2100, LM2101, LM2130 and more |
The Honda kit from joytrace states a 10x25mm hex bolt (90105-VA3-J01) with a 10mm washer (90502-VG3-000). The GUEMORVE kit (on Amazon) states size 1/4-20 for EGO 21-inch mowers. The Yoursme rotary cutter kit (on Amazon) states a 1-1/8 inch thread diameter for Bush Hog and Land Pride cutters. Blade length is a separate measurement: see our lawn mower blade sizes chart.
How to measure your blade bolt
Measure the bolt you took out, not the hole it came from. The rotary cutter kit lists five figures: thread diameter, overall length, shoulder diameter and width, head diameter and thickness, and the machined key. Its figures are a 1-1/8 inch thread, 2-1/2 inch length, 1-1/2 by 1/2 inch shoulder, 2-1/2 by 1/2 inch head and a 1/4 inch key. Two of the walk-behind kits here state a thread size, 1/4-20 for the GUEMORVE EGO kit and 10x25mm for the Honda kit, while the Sounrui EGO kit (on Amazon) states no thread size.
Match the part number when you can. The Honda kit names bolt 90105-VA3-J01, the GUEMORVE EGO kit names bolt 5640321002, and the rotary cutter kit replaces 63607 and 7919 among others. If the old bolt is too worn to measure, the part number from your manual is the safer match. Our are lawn mower blades universal guide explains why blade hardware is model specific.
Blade bolt kits for these sizes
Three of these kits cover the Honda, EGO and rotary cutter sizes stated above, while the Sounrui kit states no thread size, so match it by model.
Safety
The rotary cutter kit maker directs you to inspect bolt heads for abnormal wear and replace a bolt worn more than 1/4 inch at any point. The rotary cutter kit states the threads should extend slightly beyond the jam nut, with a nut torque of 600 ft. lbs. for its hardware. Wear eye and hearing protection and keep children and pets away from the work area. See our Safety Disclaimer.
FAQ: mowing large lots
What size is an EGO mower blade bolt?
The GUEMORVE kit for EGO 21-inch mowers states size 1/4-20, with blade bolt 5640321002 and lock nut 5630351002. The Sounrui kit for EGO 21-inch mowers states no thread size, so match that one by model.
What size is a Honda HRX217 blade bolt?
The joytrace kit states a 10x25mm hex bolt, part 90105-VA3-J01, with a 10mm washer, part 90502-VG3-000. It names Honda HRX217, HRS216 and HRR216 mowers among others.
What size bolt does a Bush Hog rotary cutter use?
The Yoursme kit states a 1-1/8 inch thread diameter and 2-1/2 inch overall bolt length, with a 1-1/2 inch by 1/2 inch blade shoulder. It replaces part numbers including 63607 and 7919.
How do I know my blade bolt is worn out?
The rotary cutter kit maker directs you to inspect bolt heads for abnormal wear and replace a bolt worn more than 1/4 inch at any point. Always replace the lockwasher and nut when you replace the bolt.
Do these kits include nuts and washers?
Not every kit includes both. The rotary cutter kit includes 2 bolts, 2 lock washers and 2 jam nuts. The Honda kit includes 2 bolts and 2 washers, and the GUEMORVE EGO kit includes 2 bolts and 2 lock nuts. The Sounrui kit includes 1 fan, 1 bolt, 1 washer, 2 support bolts and 2 nuts.
More mowing guides
See every mower maintenance guide.




