Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Is a Lawn Mower Blade Bolt Reverse Thread?

Most lawn mower blade bolts use a standard right-hand thread, not a reverse thread, with a small number of mowers using a left-hand bolt instead.

Is a Lawn Mower Blade Bolt Reverse Thread?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sporthfish 532193003 Blade Bolt and Washer Set for Husqvarna and CraftsmanSporthfish 532193003 Blade Bolt and Washer Set for Husqvarna and Craftsman9.6/10View on Amazon
  2. 2ONYUOKU 26-0671 and 3290-465 Blade Bolt and Washer Kit, 3 SetsONYUOKU 26-0671 and 3290-465 Blade Bolt and Washer Kit, 3 Sets9.6/10View on Amazon
  3. 3SURPOUF 532193003 Blade Bolts and Washer, 3 PackSURPOUF 532193003 Blade Bolts and Washer, 3 Pack9.6/10View on Amazon
  4. 4Missiscily 710-1044 Mower Blade Adapter Hex Bolt, 3/8-24 x 1-1/2 inMissiscily 710-1044 Mower Blade Adapter Hex Bolt, 3/8-24 x 1-1/2 in9.4/10View on Amazon

The blade needs changing, and the bolt under the deck decides how the job goes. Is a lawn mower blade bolt reverse thread? No, most are not. Most blade bolts use a standard right-hand thread, so the bolt loosens counterclockwise and tightens clockwise. A small number of mowers use a left-hand thread bolt instead, and the manual for your mower is the place that says which thread you have.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Sporthfish 532193003 Blade Bolt and Washer Set for Husqvarna and Craftsman

Sporthfish 532193003 Blade Bolt and Washer Set for Husqvarna and Craftsman

Sporthfish9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 3-pack of 1-1/4 in by 7/16-20 blade bolts with curved top integrated washers for Husqvarna, Craftsman and AYP mowers.

Who it's for: owners of Husqvarna, Craftsman or AYP mowers who need the 532193003 bolt.

Who should skip it: anyone whose mower uses a different part number.

Sporthfish lists this set as 3 blade bolt washers sized 1-1/4 in by 7/16-20, made to hold the blade under the deck and thread it to the spindle. The curved top washer is built into the bolt and does not come off, which the maker states prevents thread wear and part loss. The set fits Husqvarna, Craftsman, AYP and Poulan mowers, and suits riding and zero-turn blades. No warranty term is stated, so warranty scores zero.

Pros

  • Bolt size 1-1/4 in x 7/16-20 stated
  • Curved top washer is non-detachable
  • Fits riding and zero-turn mower blades
  • 3-pack covers a full set of blade bolts

Cons

  • No warranty term is stated
  • Fits only the part numbers listed, so check yours before ordering
  • Black only in this listing
  • Integrated washer cannot be swapped alone
ONYUOKU 26-0671 and 3290-465 Blade Bolt and Washer Kit, 3 Sets

ONYUOKU 26-0671 and 3290-465 Blade Bolt and Washer Kit, 3 Sets

ONYUOKU9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 3-set kit of black oxide steel blade bolts with Belleville washers for Toro, Exmark, TimeMaster and Recycler mowers.

Who it's for: Toro and Exmark owners doing a full blade change.

Who should skip it: anyone whose mower is not a Toro or Exmark model listed.

ONYUOKU lists this kit as 3 sets, each a hex head bolt with a Belleville washer, replacing Toro part 26-0671 and washer 3290-465. The bolts are black oxide coated steel, heat-treated for strength, and the spring-loaded washers hold torque and prevent blade wobble during high-speed rotation. The kit fits over 30 Toro and Exmark models, including TimeMaster 30 in, Recycler and Quest Zero-Turn mowers. No warranty term is stated, so warranty scores zero.

Pros

  • Black oxide steel, heat-treated for strength
  • Belleville washers hold torque and stop blade wobble
  • Fits over 30 Toro and Exmark models
  • 3 complete sets cover a full blade change

Cons

  • No warranty term is stated
  • Black only in this listing
  • Fits only Toro and Exmark models listed
  • No bolt size is stated
SURPOUF 532193003 Blade Bolts and Washer, 3 Pack

SURPOUF 532193003 Blade Bolts and Washer, 3 Pack

SURPOUF9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 3-pack of 3/8 in blade bolts with washers for Craftsman, Poulan and Husqvarna mowers.

Who it's for: owners of Craftsman, Poulan or Husqvarna mowers who need the 532193003 bolt in a 3-pack.

Who should skip it: anyone who needs a stated bolt length or a different part number.

SURPOUF lists this set as 3 blade bolts with washers in 3/8 in size, part 532193003, for Craftsman, Poulan and Husqvarna mowers. The same part number appears here with a different stated size, so check the size before ordering. The maker states the bolt and washer spread the load evenly and hold a tight fit, with corrosion, wear and tear resistance. No warranty term is stated, so warranty scores zero.

Pros

  • 3/8 in size stated for the 532193003 bolt
  • Washer spreads the load and guards the surface
  • Corrosion, wear and tear resistance stated
  • 3-pack covers a full set of blade bolts

Cons

  • No bolt length is stated
  • Black only in this listing
  • Fits only the part numbers listed
  • Material is not named
Missiscily 710-1044 Mower Blade Adapter Hex Bolt, 3/8-24 x 1-1/2 in

Missiscily 710-1044 Mower Blade Adapter Hex Bolt, 3/8-24 x 1-1/2 in

Missiscily9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A 3/8-24 by 1-1/2 in hex bolt, part 710-1044, for MTD and Craftsman lawn equipment.

Who it's for: owners of an MTD or Craftsman machine who need a 710-1044 bolt.

Who should skip it: anyone changing a full set of blade bolts together.

Missiscily lists this bolt as a 3/8-24 by 1-1/2 in hex bolt, part 710-1044, for MTD and Craftsman lawn and garden equipment. The listing names a long run of compatible models, including Ryobi, MTD and Craftsman machines from 1993 to 2002. The pack holds 1 bolt, so it suits replacing 1 worn bolt. No warranty term is stated, so warranty scores zero.

Pros

  • Exact size stated: 3/8-24 by 1-1/2 in
  • Fits a long list of MTD, Craftsman and Ryobi models
  • A 1-bolt pack for a lone worn bolt, no spare to store
  • Fits listed models from 1993 to 2002

Cons

  • Only 1 bolt in the pack
  • A full set needs 1 per blade
  • No corrosion resistance is stated
  • Black only in this listing

Is a lawn mower blade bolt reverse thread?

Most mowers use a standard right-hand thread on the blade bolt, so it loosens counterclockwise and tightens clockwise. A left-hand thread bolt does the opposite, and those bolts may carry an LH mark on the head or a note in the manual.

Thread Loosens How to spot it
Standard right-hand Counterclockwise Most mowers; no special mark
Left-hand, reverse Clockwise May carry an LH mark; check the manual

Which thread you need depends on the mower model, so match the bolt to the mower.

How to tell which thread your mower uses

Start with the manual: it names the blade bolt part number and, where fitted, the left-hand thread. Then look at the bolt head for an LH mark or a groove cut across the flats, and check the part number in the manual against the sets below: 532193003, 710-1044 and 26-0671. If the bolt tightens as you turn it counterclockwise, stop and try the other way.

What to check before you order a replacement bolt

Match the part number: 532193003 fits Craftsman, Poulan and Husqvarna mowers, 710-1044 fits MTD and Craftsman models, and 26-0671 fits Toro and Exmark models. Then match the size: the listings here state 3/8 in, 3/8-24 by 1-1/2 in, and 1-1/4 in by 7/16-20. The sets here come in 3-packs and 3-set kits, while the Missiscily listing holds 1 bolt. Check the washer: the Sporthfish washer (on Amazon) is built into the bolt, and the ONYUOKU kit (on Amazon) uses Belleville washers.

Blade bolts and washers for the job

With the thread direction and part number known, these sets cover the replacement step for the mowers they fit.

Safety

Work with the engine off and cool, and keep children and pets out of the yard. Wear eye protection and gloves, and keep the blade from turning while you work on the bolt.

FAQ: mowing large lots

Are lawn mower blade nuts reverse thread?

The nut follows the same rule as the bolt: most are standard right-hand thread. Check the manual, and match the replacement by part number.

Are push mower blades reverse thread?

The blade itself has no thread; the bolt that holds it does. Most push mowers use a standard right-hand thread bolt, so it loosens counterclockwise. Check the manual for the rest.

How do I loosen a blade bolt that will not move?

Confirm the thread direction, since turning a reverse-thread bolt the standard way only tightens it. Hold the blade still, and follow the manual. If the bolt still will not move, stop and get help.

Does a left-hand thread bolt look different?

It may carry an LH mark on the head, or a groove across the flats. Without a mark it looks like a standard bolt, so the manual or the part number is the way to know.

Can I use any blade bolt that fits the hole?

No. Match the part number and the size: the sets here state 3/8 in, 3/8-24 by 1-1/2 in, and 1-1/4 in by 7/16-20. Two sets here share part 532193003 yet state different sizes, so check both before ordering.

More mowing guides

More buying guides