How to Use a Snow Thrower Safely and Effectively
A plain plan for running a snow thrower safely: prep the machine, clear the path, coat the chute, and throw snow with the wind.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Stens 752-102 Snowblower Spray, 11 oz9.7/10View on Amazon - 2
Flex Seal Winter Wax, 11 oz9.6/10View on Amazon - 3
Snow Jet Snowblower Spray 3-Pack with CanGun9.6/10View on Amazon - 4
Ariens 52100100 Deluxe Snow Blower Shear Bolt 3 PK9.6/10View on Amazon
After a snowfall, the driveway, the walk to the house and the path to the outbuildings all need clearing before the snow packs down and turns to ice. This guide explains how to use a snow thrower step by step, from prep to the last pass, so the machine does the heavy work. The steps below cover the machine, the path and the wind, plus the gear that keeps the chute from clogging.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Stens 752-102 Snowblower Spray, 11 oz
Snowblower spray in an 11 oz bottle with a non-stick polymer treatment for the auger housing and chute, backed by a 1 year warranty.
Who it's for: owners who want a spray made for the chute and auger, with a stated warranty.
Who should skip it: anyone who wants one coating for shovels and plows too, or a multi-pack in one order.
The Stens 752-102 is a snowblower spray built around a non-stick polymer treatment for the auger housing and chute. The listing states an 11 oz size, a part number of 752-102, and a 1 year warranty, and it says the snow-jet spray reduces friction and helps blow snow further. It is sold as an individual bottle.
Pros
- Non-stick polymer treatment made for the auger housing and chute
- Snow-jet spray reduces friction and helps blow snow further, per the listing
- 1 year warranty stated on the listing
- 11 oz bottle, sold as an individual bottle
Cons
- The listing gives no guidance on how often to reapply the coating
- Sold as an individual bottle, and the listing notes to order 12 for a complete case
- No weight is stated in a rounded figure; the spec table lists 0.95 pounds
- Formulated specifically for snowblowers, so the listing does not claim use on shovels or plows

Flex Seal Winter Wax, 11 oz
Clear winter wax in an 11 oz can that coats shovels, plows and snowblowers so snow slides off metal, fiberglass, painted and plastic surfaces.
Who it's for: owners who want one coating for the snowblower, shovels and plows.
Who should skip it: anyone who wants a stated warranty term, or a pack with more than one can.
Flex Seal Winter Wax is a clear, non-stick winter coating in an 11 oz can. The listing states a weight of 0.9 pounds and dimensions of 8.0 x 2.75 x 2.75 in, and it lists metal, fiberglass, painted and plastic surfaces. The maker claims it repels snow and ice and helps blades stay sharp with less wear.
Pros
- Works on shovels, plows, snowblowers, skis and snowboards, per the title
- Prevents ice build-up and keeps snow sliding off, per the listing
- Protects metal, fiberglass, painted and plastic surfaces
- The listing claims it helps blades stay sharp with less wear
Cons
- Warranty term is not stated on the listing
- The listing does not state how long one coat lasts
- Only one can in the pack, so heavy use means buying more
- The listing gives no reapply guidance for wet, heavy snow

Snow Jet Snowblower Spray 3-Pack with CanGun
Three-pack of snowblower spray with a CanGun applicator, made to coat chutes, shovels and plows for wet, heavy snow.
Who it's for: owners who want a multi-pack and a grip applicator for heavy, wet snow.
Who should skip it: anyone who wants a stated warranty term, or a per-can size on the listing.
The Snow Jet spray from Global Climate Alliance comes as a 3-pack with a CanGun applicator. The listing states dimensions of 2.0 x 2.0 x 9.0 in, a part number of SJ and a model of MDI-Snowjet, and it describes a durable polymer coating made for wet, heavy conditions. The maker claims it lowers friction and keeps blowers and shovels clear of buildup.
Pros
- Three cans in one pack for chutes, shovels and plows
- CanGun applicator gives a stable grip for precise coating, per the listing
- Made for wet, heavy conditions with packed, damp or icy buildup
- Durable polymer coating forms a slippery layer across metal surfaces
Cons
- Warranty term is not stated on the listing
- No weight is stated on the listing
- The listing does not state the size of each can
- The listing gives no reapply interval for the coating

Ariens 52100100 Deluxe Snow Blower Shear Bolt 3 PK
Genuine OEM shear bolts, 5/16 in, in a 3 pack for Deluxe and Pro snow throwers, except pre-2008 models.
Who it's for: owners of Deluxe or Pro machines who want genuine spares on hand.
Who should skip it: owners of pre-2008 models, or anyone who needs a different bolt size.
The Ariens shear bolt pack holds 3 genuine OEM bolts and nuts, part number 52100100, in a 5/16 in size. The listing states a weight of 0.1 pounds and dimensions of 5.35 x 2.95 x 0.55 in, and it warns the bolts do not work with pre-2008 models of Deluxe or Pro units. One wrinkle: the spec table lists the part number as 521001x3 for the 3 pack, while the title gives 52100100, so match the title and bullets when ordering.
Pros
- Genuine OEM Ariens part, number 52100100
- Three bolts and nuts in the pack, so a spare is ready
- 5/16 in size for Deluxe and Pro units
- Bolts and nuts included in the 3 pack
Cons
- Does not work with pre-2008 models of Deluxe or Pro units
- Warranty term is not stated on the listing
- A spare part only; it does not help the chute stay clear
Other machines to compare
Arnold 490-241-0032 Univ Snow Thrower CabCheck price on Amazon
KOOTANS 1pair 784-5580 Snow Thrower Slide Plate Shoes HeavyCheck price on Amazon
Universal Roller Skid Snow Thrower ShoesCheck price on Amazon
HUSWELL 490-241-0010 Snowblower Slide Shoes Skid ShoeCheck price on Amazon
784-5580Check price on Amazon
CANAMAX 731-06439 Snowblower Skid Shoes Slide Shoe SetCheck price on Amazon
How to use a snow thrower: prep the machine first
Start with the machine cold and the engine off. Check that the shear bolts are whole and the chute turns freely, then coat the inside of the chute and the auger housing with a non-stick spray or wax so wet snow slides through instead of packing in. Look over the belts and skid shoes for wear, and clear the work area of sticks, stones and debris before the engine starts.
| Step | Do this | Watch for |
|---|---|---|
| Prep the machine | Check shear bolts, coat the chute | A cracked bolt or a dry chute |
| Clear the path | Move sticks, stones and hoses aside | Hidden debris under fresh snow |
| Work with the wind | Throw snow downwind, away from the drive | Wind that shifts |
| Keep the chute clear | Recoat when snow starts to stick | Wet snow that packs fast |
The shear pin picks list bolts by fit.
Step 2: clear the path
Walk the driveway and paths before you start the engine. Move cars, hoses, sticks and stones out of the way, and mark the edges of the drive with stakes. Pick one spot for the pile, downwind and away from the road, the walk and the drains.
Step 3: work with the wind
Start on the upwind side and throw snow downwind, in wide, overlapping passes. Keep the chute pointed away from the house and the cars, toward the pile spot, and change direction when the wind shifts. On a long driveway, work in lanes from the upwind side toward the downwind edge, so snow lands on ground you have not cleared yet.
Step 4: keep the chute clear
Wet snow packs into the chute faster than dry snow, so watch the throw distance: when the stream shortens, stop the engine and clear the chute with a stick or a broom handle, never with a hand. Recoat the chute with spray or wax when snow starts to stick again. If the auger stops, stop the engine and check the shear bolts before you start again.
Gear that helps: sprays, wax and spare shear bolts
The steps above go faster when the chute stays slick and a spare shear bolt is on hand, so the four items below cover coating and spares for the job.
Safety
Wear eye and hearing protection and sturdy shoes. Keep children, pets and bystanders away from the work area, and point the chute away from people, cars and windows. Never put a hand into the auger or the chute; stop the engine and wait for all moving parts to stop before clearing a clog. Refuel only with the engine off and cool, and run a gas machine outdoors. More gear is listed in the trimmer and blower section.
FAQ: mowing large lots
How do I keep snow from sticking in the chute?
Coat the inside of the chute and the auger housing with a non-stick spray or wax before you start, and recoat when snow starts to stick again. The sprays and wax in the gear section are made for that job.
What should I check before I start the snow thrower?
Check that the shear bolts are whole, the chute turns freely, and the path is clear of sticks, stones and hoses. A spare bolt in the right size saves a trip back to the shop.
Which way should I throw the snow?
Throw it downwind, away from the driveway, the walk and the road, and pick the pile spot first. If the wind shifts, change the chute direction so the snow does not blow back onto cleared ground.
What do I do if a shear bolt breaks?
Stop the engine, wait for the auger to stop, and swap in a bolt of the same size. The Ariens bolts (on Amazon) in the gear section are 5/16 in and fit Deluxe and Pro units, except pre-2008 models, so check the fit before you order.
Can I use a snow thrower on a gravel driveway?
On a machine with adjustable skid shoes, yes: set them so the auger rides above the gravel, and keep a slow, steady pace. Machines without skid shoes ride on the auger itself and pick up gravel, so clear loose stones from the path first either way.




