Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Lawn Mower Battery Installation: Step-by-Step

A step-by-step guide to lawn mower battery installation: match the voltage, set the battery in the tray, connect the cables in order and charge the battery before the first mow.

Lawn Mower Battery Installation: Step-by-Step
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BLACK+DECKER BM3B 6V/12V Fully Automatic Battery ChargerBLACK+DECKER BM3B 6V/12V Fully Automatic Battery Charger9.5/10View on Amazon
  2. 2Foval Automatic Trickle Battery Charger 12V 1000mA SmartFoval Automatic Trickle Battery Charger 12V 1000mA Smart9.6/10View on Amazon
  3. 3Huthbrother 136-9126 12V Battery Charger for Toro 22-InchHuthbrother 136-9126 12V Battery Charger for Toro 22-Inch9.3/10View on Amazon

To install a lawn mower battery, set the battery in the tray with the terminals in the same position as the old battery, connect the positive cable to the positive terminal and the negative cable to the negative terminal, fasten the hold-down, and charge the battery before mowing. Lawn mower battery installation is a short maintenance job, and most of the work is matching the battery to the mower and keeping the cables in the right order. This guide walks through the job from the old battery out to the first charge.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

lawn mower battery installation: check the voltage and the fit

Start with the battery the mower takes. The listings in this guide state 12-volt batteries, and the BLACK+DECKER charger (on Amazon) in the listings handles 6-volt and 12-volt AGM, GEL and WET batteries. Match the voltage and the battery type: the FOVAL charger (on Amazon) in the listings suits SLA, VRLA, GEL CELL, AGM and WET lead acid batteries. Check the manual for the voltage and the type the mower takes before ordering.

A part number match is the surest check. The Huthbrother charger (on Amazon) in the listings is a 12-volt charger for Toro 22-inch lawn mower batteries, and it replaces part numbers 136-9126, 114-1588, 104-7401 and 1141588. It works with Toro batteries 106-8397, 105-6845, 104-7682, 104-7903 and 115-1304, and the listing names Toro mower models such as 20014, 20018 and 20031.

Charger in the listings Voltage Current Warranty
FOVAL smart charger 12-volt 1A 18 months
BLACK+DECKER BM3B 6-volt and 12-volt 1.5 Amp Limited One Year
Huthbrother 136-9126 12-volt Not stated No warranty

See the best lawn mower battery charger guide for charger picks, and the best battery for riding lawn mower guide for battery picks.

Disconnect the old battery

Park the mower on flat ground with the engine off and cool, and remove the key. Wear eye protection and gloves, and keep sparks and flames away from the battery. Disconnect the negative cable, then the positive cable. Removing the negative cable first keeps a wrench from shorting the positive terminal to the frame. Take off the hold-down, lift the old battery out of the tray, and set it aside for recycling.

Set the new battery in place

Clean the tray and check the cable ends for corrosion. A terminal brush takes corrosion off the terminals and cable ends; see the best battery terminal brush cleaner picks. Set the new battery in the tray with the terminals in the same position as the old battery. Put the hold-down back and snug it so the battery cannot shift while mowing.

Connect the cables in the right order

Connect the positive cable to the positive terminal, then connect the negative cable to the negative terminal. Snug the connections so the cables cannot wiggle, and check that the cable ends sit flat on the terminals. Keep the cables clear of belts, blades and hot parts.

Charge the battery after install

Charge the battery with a charger matched to the voltage and the battery type. The FOVAL charger in the listings is a 1A 12-volt smart charger with a 4-step charging program: Initialization, Bulk Charge, Absorption Mode and Float Mode. It switches to float maintenance voltage after a full charge, and the LED indicators show the state of charge: green is the power light, green with red means charging, and green with yellow means fully charged. Built-in circuit protection guards against reverse polarity, over-current, overload and over-voltage, and the shell is ABS flame-retardant. The charger measures 3.9 x 2.4 x 1.25 inches, weighs 10.5 oz, and has cables the listing states at 102 inches long, with an 18 months warranty stated. See the FOVAL automatic trickle battery charger review for the full listing.

The BLACK+DECKER BM3B in the listings is a 6-volt and 12-volt charger and maintainer at 1.5 Amp, with battery clips or O-ring terminals. It stops charging automatically when the battery is fully charged and switches to float mode monitoring, and it is ETL certified for performance and safety, with built-in circuit protection against overcharging, reverse polarity and short circuit. It measures 5.0 x 3.0 x 8.9 inches, weighs 1.2 pounds, and carries a Limited One Year warranty.

Check the fit before mowing

Before mowing, check the cables and the hold-down again: the connections should be snug, the hold-down should keep the battery still, and the terminals should be clean. Start the mower and let it run while checking that the cables stay clear of moving parts. If the mower turns over slowly, charge the battery again and check the cable ends for corrosion.

Safety

Wear eye protection and gloves when handling a battery, and work with the engine off and cool. Keep sparks, flames and smoking away from the battery, and never short the terminals with a tool. Batteries hold acid, so wash skin and clothing right away if acid touches them, and keep children and pets away from the work area. Follow the manual for the mower and the instructions for the charger in use.

FAQ: mowing large lots

What voltage battery does a lawn mower use?

The listings in this guide state 12-volt batteries. The BLACK+DECKER charger handles 6-volt and 12-volt AGM, GEL and WET batteries, and the FOVAL charger is a 12-volt charger for SLA, VRLA, GEL CELL, AGM and WET lead acid batteries.

Which cable goes on first when installing a mower battery?

The positive cable goes on the positive terminal first, then the negative cable goes on the negative terminal. Take the cables off in the reverse order: negative first, then positive. Keeping the order keeps a wrench from shorting the positive terminal to the frame.

Does a new lawn mower battery need charging before use?

Charge it with a charger matched to the voltage and the battery type. The FOVAL 1A 12-volt smart charger runs a 4-step charging program and switches to float maintenance voltage after a full charge, and the BLACK+DECKER 1.5 Amp charger stops charging automatically and switches to float mode monitoring. Check the charger indicators for a full charge before mowing.

How can you tell a charger fits a mower battery?

Match the voltage, the battery type and the part number. The Huthbrother 12-volt charger replaces part numbers 136-9126, 114-1588, 104-7401 and 1141588, and works with Toro batteries 106-8397, 105-6845, 104-7682, 104-7903 and 115-1304. Check the part number against the original before buying.

What if the terminals are corroded?

Clean the terminals and the cable ends with a terminal brush before connecting the cables; see the best battery terminal brush cleaner picks. If a cable end is cracked or the corrosion will not come off, replace the cable before installing the battery.

How should a mower battery be stored over winter?

Charge the battery before storage and keep it on a maintainer through the off season. See the how to store a battery mower for winter guide for the full storage routine.

More mowing guides

See the mower maintenance hub for more maintenance guides.

More buying guides