Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Metal vs Nylon Trimmer Head: Which One Should You Buy?

Metal and nylon trimmer heads compared on cutting style, feed, fit and pack contents, with one metal blade example and two nylon line examples from the listings.

Metal vs Nylon Trimmer Head: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Cokacot 6 Steel Razors Metal Trimmer HeadCokacot 6 Steel Razors Metal Trimmer Head9.5/10View on Amazon
  2. 2Avsty ATH005 Nylon Bump Feed Trimmer HeadAvsty ATH005 Nylon Bump Feed Trimmer Head9.4/10View on Amazon
  3. 3DIATOP Fuss Free Nylon Cord Trimmer HeadDIATOP Fuss Free Nylon Cord Trimmer Head9.3/10View on Amazon

Verdict: Choose a metal trimmer head if your work is thick grass and tough weeds on rough ground. Choose a nylon trimmer head if your work is lawn edges, beds, fences and light brush, where forgiving line and fast line changes matter more than blade cutting power.

Thick growth along a fence line and soft grass around beds ask for different tools, and the metal vs nylon trimmer head choice starts with what grows on the property. A metal head spins blades that slice stems. A nylon head spins line that whips through grass and bends away from posts and stones.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

The examples

Cokacot 6 Steel Razors Metal Trimmer Head

Cokacot 6 Steel Razors Metal Trimmer Head

Cokacot9.5/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A metal trimmer head kit with 6 steel razors in a reversible Mn65 design, a 1 inch arbor, and a pack of 2 heads plus an adapter kit for string trimmers.

The Cokacot example is the metal side of this comparison: 2 heads, each with 6 steel razors, in Mn65 steel with a reversible design. The listing states the heads cut thick grass and weeds, and the kit adds a 6 teeth thrust guard washer, a thrust washer, a rider plate, a collar nut and an L-wrench. The arbor is 1 inch, stated to fit most trimmers.

Pros

  • 6 steel razors aimed at thick grass and weeds
  • Reversible Mn65 design for cutting performance
  • Pack of 2 heads plus thrust washers, rider plate, collar nut and L-wrench
  • 1 inch arbor stated to fit most trimmers

Cons

  • No nylon line option for gentle edging near beds
  • Weight is not stated
  • Warranty is not stated on the listing
  • Blade heads need care around stones, posts and fences
Avsty ATH005 Nylon Bump Feed Trimmer Head

Avsty ATH005 Nylon Bump Feed Trimmer Head

Avsty9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A nylon trimmer head in a pack of 2 with a bump feed system, preloaded line and a reinforced nylon build, sized M10 x 1.25 LH for gas and electric string trimmers.

The Avsty example is a nylon line head built around convenience: a bump feed mechanism, preloaded line and a fit stated for most gas and electric string trimmers. The listing states reinforced nylon and impact-resistant materials, smooth cutting of thick grass, weeds and light brush, and reduced vibration during operation.

Pros

  • Bump feed releases line without stopping to adjust it by hand
  • Preloaded line, ready to use on arrival
  • Reinforced nylon build stated for wear resistance
  • Pack of 2 heads for a spare on the shelf

Cons

  • Line size is not stated
  • Weight is not stated
  • Warranty is not stated on the listing
  • Line suits grass and light brush, not woody stems
DIATOP Fuss Free Nylon Cord Trimmer Head

DIATOP Fuss Free Nylon Cord Trimmer Head

DIATOP9.3/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A hand feed nylon cord trimmer head that takes a cord without disassembly, with a ground contact cup that rotates to slide on the ground and iron fittings at the ground contact area.

The DIATOP example is the second nylon side entry, and its selling point is simple cord changes: plug in the cord and mow, with no disassembly required. The listing states the cup at the bottom rotates to slide on the ground, and claims durability 3 times longer than a regular trimmer head, with iron fittings embedded in the ground contact area. The stated body size is approx. 7.5 cm (2.95 inch) x 10 cm (3.93 inch) x 3 cm (1.18 inch), and the mounting hole diameter is approx. 12.3 mm (0.48 inch).

Pros

  • Cord changes without disassembling the head
  • Ground contact cup rotates to slide on the ground
  • Iron fittings embedded at the ground contact area
  • Round hole mount stated for general brushcutters

Cons

  • Cord diameter limit of 3.4 mm (0.13 inch) or less
  • Weight figures in the listing do not agree
  • Warranty is not stated on the listing
  • Hand feed means line length is set by hand

Other machines to compare

Metal vs Nylon Trimmer Head Side by Side

Factor Cokacot 6 Steel Razors Avsty ATH005 DIATOP Fuss Free Head
Cutting head 6 steel razors, reversible Bump feed nylon line, preloaded Hand feed nylon cord, no disassembly
Material Mn65 steel Reinforced nylon Nylon cord, iron fittings at ground contact
Pack 2 heads plus adapter kit Pack of 2 Not stated
Fit 1 inch arbor M10 x 1.25 LH Round hole mount
Size stated 6.0 inches x 6.0 inches x 2.0 inches 3.7 inches x 5.8 inches x 5.0 inches Approx. 7.5 cm (2.95 inch) x 10 cm (3.93 inch) x 3 cm (1.18 inch)
Cord size No line, steel razors Not stated 3.4 mm (0.13 inch) or less
Weight stated Not stated Not stated Approx. 198g

Figures are manufacturer stated for the examples, collected 4 November 2026.

Cutting head: blade or line

A metal head cuts with blades. The Cokacot example uses 6 steel razors in Mn65 steel, with a reversible design, and the listing states the heads cut thick grass and weeds. Blades hold an edge through stems that shred line, but they strike hard when they meet a rock or a post, so they suit open, rough ground more than tight beds.

A nylon head cuts with line. Line is forgiving around fences and poles, which suits edges and tight spots. The Avsty example uses a bump feed line head, while the DIATOP example uses a hand feed nylon cord head. The Avsty example suits thick grass, weeds and light brush, while the DIATOP example suits mowing along concrete edges, fences and poles.

Feed and line changes

Feed style decides how often the work stops. The Avsty bump feed head releases line with a bump while trimming, so line length is restored without stopping to adjust it by hand. The DIATOP hand feed head takes a different route: plug in the cord and mow, with no disassembly required for cord changes. The Cokacot metal head needs no line at all, since its 6 steel razors do the cutting.

Fit and mounting

Fit is where a head either works or sits on the shelf. The Cokacot example states a 1 inch arbor, stated to fit most trimmers. The Avsty example is sized M10 x 1.25 LH and is stated to fit most gas and electric string trimmers. The DIATOP example uses a round hole mount for general brushcutters, with a mounting hole diameter of approx. 12.3 mm (0.48 inch) and a mounting area of 25.5 mm (1 inch).

What each one can cut

The dividing line is stem thickness. Metal blades suit thick grass and weeds on rough ground, where the Cokacot listing states its razors cut with ease. Nylon line suits grass and weeds, plus light brush in the Avsty listing. The DIATOP listing adds mowing along concrete edges, fences and poles, places where a blade head would strike hard surfaces.

Handling and upkeep

A nylon line head is simpler to live with: bump or hand feed line, replace the cord, keep cutting. A metal blade head needs more care around obstacles, and the Cokacot listing advises sturdy high shoes over the knee, glasses and gloves during use. Neither the Cokacot listing nor the Avsty listing states a weight, so weight cannot be compared from the listings.

Acreage and terrain fit

Cokacot 6 Steel Razors

Acreage fitUnder 11-22-55-1010+
Terrain fitRough groundTrees and beds

Avsty ATH005

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatTrees and beds

DIATOP Fuss Free Head

Acreage fitUnder 11-22-55-1010+
Terrain fitFlatTrees and beds

Matching It to Your Property

  • Rough, brushy ground with thick weeds suits the metal blade example, with its 6 steel razors.
  • Flat lawn edges and beds suit a nylon line head, which bends away from posts and stones.
  • Fence lines and concrete edges suit the hand feed nylon example, with its rotating ground contact cup.
  • Storage is simple for all examples: heads swap onto the trimmer already on the property, with no extra machine to store.

The Acre Score explained

The Acre Score weighs performance, build quality, value, safety and warranty. A factor the listing does not state as a product feature scores zero, which is why all examples score zero for safety and warranty.

Product Acre Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Cokacot 6 Steel Razors 9.5 29 21 20 0 0
Avsty ATH005 9.4 28 20 20 0 0
DIATOP Fuss Free Head 9.3 26 19 19 0 0

We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower.

Many owners keep both styles: a nylon line head for edges near the house, and a metal blade head for the back fence line.

Trimmer and blower safety

Wear eye and hearing protection, long pants and sturdy footwear, and keep bystanders well back while the line or blade spins. Clear stones and debris first, and stop the engine or remove the battery before clearing the head. Refuel only with the engine off and cool. See OSHA landscaping safety. Read our Safety Disclaimer.

FAQ: mowing large lots

Can a nylon trimmer head cut thick weeds?

It can cut thick grass and light brush, as the Avsty listing states, but woody stems shred or wrap line. For thick, woody growth, a metal blade head fits the job better.

Can a metal trimmer head trim near beds and walks?

It can, but blades strike hard when they meet stones, posts and concrete edges. Nylon line is more forgiving in tight spots.

How do I change line on a nylon trimmer head?

It depends on the feed style. A bump feed head releases line with a bump while trimming. A hand feed head, like the DIATOP example, takes a new cord without disassembly. Check the cord diameter limit first: the DIATOP listing caps cord at 3.4 mm (0.13 inch) or less.

Will these heads fit any string trimmer?

No single fit covers every trimmer. The Cokacot example states a 1 inch arbor, the Avsty example is M10 x 1.25 LH, and the DIATOP example uses a round hole mount. Match the stated fit to the trimmer before ordering.

What safety gear suits trimmer head work?

Eye protection, sturdy boots and gloves suit either head. The Cokacot listing advises sturdy high shoes over the knee, glasses and gloves. Keep people and pets well back.

More mowing guides

More buying guides

Trimmers and Blowers ·

Snow Blower Tire Size Guide

Read the size off the tire sidewall, match diameter, width and wheel to the old tire, and check bore and hub fit before ordering.