Poly vs Steel Snow Plow Blade: Which One Should You Buy?
Poly and steel snow plow blades compared on material, length, width, weight and warranty, with a UHMW poly edge and a high carbon steel edge as examples.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Buyers Products 1301035 High Carbon Steel Snow Plow Cutting Edge9.5/10View on Amazon - 2
UHMW Snow Plow Poly Cutting Edge, 72 in Long9.5/10View on Amazon - 3
UHMW Snow Plow Poly Cutting Edge, 54 in Long9.5/10View on Amazon
Verdict: Choose poly if your driveway or lot scratches easily and you want a quiet edge you can trim to size. Choose steel if you want the longest, widest cutting edge with a stated warranty and an OEM fit.
A driveway that scratches easily changes the plow blade question. The poly vs steel snow plow blade choice comes down to what the edge meets: poly slides over concrete, asphalt, cobblestone and pavers without scratching, while steel comes in a longer, wider edge and carries a warranty. This comparison covers the differences, then the examples from the listings we reviewed.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
The three examples

Buyers Products 1301035 High Carbon Steel Snow Plow Cutting Edge
A high carbon steel OEM replacement cutting edge, 1/2 in x 6 in x 96 in, with a 1-year warranty and no labor.
The steel example is the longest edge here: a high carbon steel OEM replacement cutting edge, 1/2 in x 6 in x 96 in, with part number 1301035 stated. It is the only example with a stated warranty term, 1 year with no labor.
The listing is the thinnest here: a single bullet and a spec table, with no stated weight, no install detail and no driveway-safety claim. The edge is the widest and longest on stated figures, but the listing leaves weight and upkeep unclear.
Pros
- 96 in long and 6 in wide, the longest and widest edge here
- High carbon steel OEM replacement cutting edge
- 1-year warranty, no labor
- OEM replacement with part number 1301035 stated
Cons
- No stated weight
- A single bullet in the listing, with no install detail
- No driveway-safety claim stated
- No stated cold-weather claim

UHMW Snow Plow Poly Cutting Edge, 72 in Long
A UHMW poly cutting edge, 3/4 in thick and 4 in wide, that will not scratch concrete, asphalt, cobblestone or pavers, and stays tough in sub-zero temperatures.
The 72 in poly example is the driveway-safe pick here. UHMW poly will not scratch concrete, asphalt, cobblestone or pavers, and the listing says it stays tough and impact-resistant in sub-zero temperatures without cracking, chipping or warping. It is quieter and smoother than steel, and it trims to size with common shop tools.
The listing contradicts itself on size: the title says 72 in long and 3/4 in thick, while the spec table says 60.0 in long and 1.0 in thick. This guide trusts the title and bullets over the table. The listing also shares one part number and one spec table with the 54 in example, so the length figures come from the titles alone. No warranty term is stated.
Pros
- UHMW will not scratch concrete, asphalt, cobblestone or pavers
- Tough and impact-resistant in sub-zero temperatures, and will not crack, chip or warp
- Quieter and smoother than steel, with less vibration and noise
- Lightweight and easy to cut, drill and install, and trims to size with common shop tools
Cons
- No warranty term is stated
- No safety certification is stated

UHMW Snow Plow Poly Cutting Edge, 54 in Long
The same UHMW poly cutting edge in a 54 in length, 3/4 in thick and 4 in wide, that will not scratch concrete, asphalt, cobblestone or pavers.
The 54 in poly example is the shorter version of the 72 in edge, with the same UHMW build and the same bullets: it will not scratch concrete, asphalt, cobblestone or pavers, and it stays tough in sub-zero temperatures. It suits a narrower plow or a snow blower, per the listing's fit list.
The listing contradicts itself on size in the same way: the title says 54 in long and 3/4 in thick, while the spec table says 60.0 in long and 1.0 in thick. This guide trusts the title and bullets over the table. No warranty term is stated.
Pros
- UHMW will not scratch concrete, asphalt, cobblestone or pavers
- Tough and impact-resistant in sub-zero temperatures, and will not crack, chip or warp
- Quieter and smoother than steel, with less vibration and noise
- Lightweight and easy to cut, drill and install, and trims to size with common shop tools
Cons
- No warranty term is stated
- No safety certification is stated
Other machines to compare
UHMW Snow Plow Poly Cutting Edge Industrial Strength 3/4" XCheck price on Amazon
Hogarjal UHMW Poly Cutting Edge 48in Snow Plow BladeCheck price on Amazon
ATV / UTV Snow Plow Poly Cutting Edge Industrial StrengthCheck price on Amazon
5"x1" Poly Cutting Edge for Snow plowsCheck price on Amazon
Snow Plow Poly Cutting EdgeCheck price on Amazon
UHMW ATV/UTV Snow Plow Poly Cutting Edge Industrial StrengthCheck price on Amazon
Poly vs steel snow plow blade side by side
| Factor | Poly (UHMW 72 in) | Poly (UHMW 54 in) | Steel (Buyers 96 in) |
|---|---|---|---|
| Material | UHMW polyethylene | UHMW polyethylene | High carbon steel |
| Length (stated) | 72 in in the title, 60.0 in in the spec table | 54 in in the title, 60.0 in in the spec table | 96 in |
| Width | 4 in | 4 in | 6 in |
| Thickness (stated) | 3/4 in in the title, 1.0 in in the spec table | 3/4 in in the title, 1.0 in in the spec table | 1/2 in |
| Weight (stated) | 5.0 lb | 5.0 lb | Not stated |
| Driveway safety | Will not scratch concrete, asphalt, cobblestone or pavers | Will not scratch concrete, asphalt, cobblestone or pavers | Not stated |
| Cold weather | Tough in sub-zero temperatures | Tough in sub-zero temperatures | Not stated |
| Warranty | Not stated | Not stated | 1 year, no labor |
| Best at | Driveways and lots with surfaces that scratch | Narrower plows and snow blowers | OEM replacement on a 96 in plow |
Figures are manufacturer stated for the 3 example blades, collected 5 November 2026.
Material: poly or steel
Poly here means UHMW, ultra high molecular weight polyethylene. The listing says it will not scratch concrete, asphalt, cobblestone or pavers, stays tough and impact-resistant in sub-zero temperatures, and will not crack, chip or warp like rubber or cheaper plastics. It is quieter and smoother than steel, with less vibration and noise.
Steel here means high carbon steel. The Buyers example is an OEM replacement cutting edge, 1/2 in x 6 in x 96 in, with part number 1301035 stated. The listing states no driveway-safety claim and no cold-weather claim, so the steel side of this comparison rests on size, material and warranty alone.
Length, width and thickness
The steel example is the longest and widest on stated figures: 96 in long and 6 in wide, against 72 in and 54 in long and 4 in wide for the poly examples. Thickness runs the other way: the poly examples are 3/4 in thick in the title, against 1/2 in for the steel example.
The poly listings contradict themselves on size. Both titles give a length, 72 in and 54 in, and a thickness of 3/4 in, while both spec tables say 60.0 in long and 1.0 in thick. This guide trusts the title and bullets over the table, and shows both figures in the table above.
What each one is good at
Poly suits surfaces that scratch. The UHMW edge will not scratch concrete, asphalt, cobblestone or pavers, and the listing calls it ideal for residential and commercial snow removal. It also suits a plow you trim yourself: the edge cuts to size with common shop tools, and it fits snow blowers, ATV/UTV plows, truck plows, skid steers, snow pushers and tractor buckets.
Steel suits an OEM replacement. The Buyers example is a high carbon steel cutting edge sized 1/2 in x 6 in x 96 in, and the listing states a 1-year warranty with no labor. The steel listing states no driveway-safety claim, so a scratched driveway is not a reason to pick steel.
Handling and weight
The poly examples are light on stated figures: each weighs 5.0 lb per the spec table, and the listing calls the edge lightweight and flexible enough for quick DIY installation. It cuts, drills and installs with common shop tools, and trims to the exact size.
The steel listing states no weight, so the listing leaves it unclear. The steel example is 96 in long and 6 in wide, so match part number 1301035 to the plow before ordering.
Upkeep
A poly edge can be trimmed and drilled: cut it to size with common shop tools, drill the holes and install it with no special hardware. The listing says it will not crack, chip or warp, and it stays tough in sub-zero temperatures.
The steel listing states no upkeep detail.
Acreage and terrain fit
Buyers 96 in Steel Edge
UHMW Poly Edge 72 in
UHMW Poly Edge 54 in
Matching It to Your Property
- Measure the blade you already have: the poly examples come in 72 in and 54 in, and the steel example is 96 in.
- Match the edge to the surface: the poly edge will not scratch concrete, asphalt, cobblestone or pavers, per the listing.
- Check the mount: the steel edge is an OEM replacement part, so match the part number to the plow.
- Trim once, fit once: the poly edge cuts to size with common shop tools, so trim it to the plow before winter.
The Acre Score explained
The Acre Score weighs five factors: performance (material, size and the surface it suits), build quality (material and stated toughness), value (what comes in the box), safety (certifications or operator controls the listing states) and warranty (years and coverage). A factor the listing does not state scores zero, which is why the poly examples score zero for warranty and all 3 examples score zero for safety.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Buyers 96 in Steel Edge | 9.5 | 26 | 20 | 18 | n/a | 2 |
| UHMW Poly Edge 72 in | 9.5 | 28 | 21 | 20 | n/a | 0 |
| UHMW Poly Edge 54 in | 9.5 | 27 | 21 | 19 | n/a | 0 |
We show weighted point totals as scores from a 9.2 base up to a 9.8 peak, and a larger total can never read lower. Manual gear with no listed safety feature is not scored on safety, and the other 90 points decide its total.
The choice comes down to surface against size: the poly examples state a driveway-safe edge, and the steel example states the longest edge with a warranty.
Stay within the towing capacity and hitch weight your mower manual lists, and add weight slowly. Loaded carts and spreaders push a mower downhill, so take slopes straight up and down at low speed. Keep riders off carts and keep bystanders clear while you tow. Read our Safety Disclaimer.
FAQ: mowing large lots
Will a poly plow blade scratch my driveway?
No, per the listing: the UHMW edge will not scratch concrete, asphalt, cobblestone or pavers. The steel listing states no driveway-safety claim, so the poly side is the one with a stated answer here.
How long is the poly cutting edge?
The titles say 72 in for the longer example and 54 in for the shorter one, but both spec tables say 60.0 in, so the listing leaves the length unclear. This guide trusts the title and bullets over the table.
Does the steel cutting edge come with a warranty?
Yes: the spec table states a 1-year warranty with no labor. The poly examples state no warranty term.
Can I trim a poly plow blade to fit?
Yes, per the listing: the edge is easy to cut, drill and install, and trims to the exact size with common shop tools, with no special hardware required.
What machines does the poly edge fit?
Snow blowers, ATV/UTV plows, truck plows, skid steers, snow pushers and tractor buckets, per the listing.
More mowing guides
- ATV vs UTV Snow Plow: Which One Should You Buy?
- Best Cordless Snow Blower (2026): 5 Picks for Driveways
- Best Electric Snow Blower (2026): 5 Picks for Driveways
- Best Garden Tractor for Attachments (2026)
See our tow-behind attachments for more gear that mounts behind a mower or tractor.




