Pressure Washer Gun Parts Explained
The parts inside a pressure washer gun and how to match a replacement to your washer.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
RIDGE WASHER Short Gun 5000 PSI 12 GPM Swivel9.5/10View on Amazon - 2
Suttner ST-601 Trigger Gun 4000 PSI 12 GPM Brass9.5/10View on Amazon - 3
Westinghouse Short Gun 3600 PSI M22 Pistol Grip9.4/10View on Amazon - 4
Brug's Pro Swivel Gun Stainless Steel Rinsing Nozzle9.4/10View on Amazon
A pressure washer gun is the part you hold all through the job, and its parts decide whether the trigger pulls smooth, the hose stays straight and the spray stays where you point it. When the trigger sticks, the swivel binds or a fitting starts to weep, the work gets harder and slower. This guide walks through pressure washer gun parts one by one, what each part does, and how to match a replacement gun to your washer.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

RIDGE WASHER Short Gun 5000 PSI 12 GPM Swivel
Short swivel gun rated 5000 PSI and 12 GPM, with a locking handle and stainless steel internals.
Who it's for: owners who want the highest PSI rating here with a swivel tail and a full fitting kit.
Who should skip it: anyone who wants a brass body or a stated warranty.
The RIDGE WASHER short gun is the highest rated gun here at 5000 PSI and 12 GPM. The kit adds a 1/4 in quick disconnect socket, a 3/8 in quick connector and M22-14 mm and M22-15 mm fittings. The tail swivels 360° to help keep the hose from kinking, the handle locks, and the internals are stainless steel. No warranty term is stated.
Pros
- Highest PSI here at 5000 PSI and 12 GPM
- 360° swivel tail helps prevent hose kinks
- Locking handle keeps the trigger from firing by accident
- Stainless steel internals for wear resistance
Cons
- Engineering plastic body, not forged brass
- No warranty term is stated
- Short gun only, pair it with a wand
- No nozzle included, use your own

Suttner ST-601 Trigger Gun 4000 PSI 12 GPM Brass
Forged brass inline trigger gun, 4000 PSI and 12 GPM, with a stainless steel valve.
Who it's for: owners who want a brass gun they can repair and thread onto FNPT hose ends.
Who should skip it: anyone who wants quick connect fittings or a stated warranty.
The Suttner ST-601 is a forged brass inline trigger gun rated 4000 PSI and 12 GPM. The inlet is 3/8 in FNPT and the outlet is 1/4 in FNPT, with a stainless steel spring, needle, ball and seat. The unitized valve comes apart for repair. No warranty term is stated.
Pros
- Forged brass housing for strength
- 4000 PSI and 12 GPM ratings
- Stainless steel valve parts
- Unitized valve for easy repair
Cons
- No warranty term is stated
- FNPT fittings need sealant and a wrench
- No quick connect fittings included
- 4000 PSI, below the 5000 PSI top pick

Westinghouse Short Gun 3600 PSI M22 Pistol Grip
Compact pistol-grip short gun rated 3600 PSI, with an M22 inlet, a 1/4 in quick connect outlet and a 180-day limited warranty.
Who it's for: owners who want a light, compact gun for car washing and detailing with a foam cannon.
Who should skip it: anyone who needs more than 3600 PSI or a swivel tail.
The Westinghouse short gun is a compact pistol-grip gun rated 3600 PSI, sized 8.8 x 7.7 x 1.8 in. The M22-14 mm inlet and 1/4 in quick connect female outlet fit most pressure washers, and the maker lists a 180-day limited warranty.
Pros
- Compact pistol shape fits in one hand
- 3600 PSI rating for high-pressure use
- M22-14 mm inlet and 1/4 in outlet
- 180-day limited warranty stated
Cons
- Lowest stated PSI rating here
- Warranty runs 180 days only
- Short gun only, pair it with a wand
- M22-14 mm inlet only, check your hose fitting

Brug's Pro Swivel Gun Stainless Steel Rinsing Nozzle
Stainless steel swivel gun with a self-locking quick connect and a rinsing nozzle included.
Who it's for: owners who want a swivel gun with a rinsing nozzle in the box and one-hand accessory changes.
Who should skip it: anyone who needs a stated PSI rating before ordering.
The Brug's Pro Swivel Gun V2.0 is a stainless steel swivel gun with a self-locking quick connect and a light trigger, sized 12 x 7 x 2 in. The 360° ball-bearing swivel keeps the hose from tangling, and the kit includes a rinsing nozzle with a 4.0 orifice and 40° spray plus M22 adapters. The listing does not state a max PSI or a warranty term.
Pros
- Stainless steel body with impact-resistant plastic
- 360° ball-bearing swivel ends hose tangles
- Self-locking quick connect, one-hand changes
- Rinsing nozzle included, 4.0 orifice, 40° spray
Cons
- No max PSI stated, check your washer's rating
- 12 in long, the longest of the four
- Included nozzle is a 40° spray only
- M22 adapters only, check your hose fitting
Pressure washer gun parts: what each part does
The trigger opens the valve inside the gun and starts the spray. A light trigger with a smooth pull is easier on the hand over a long wash, and a locking handle keeps the trigger from firing while you carry or set the gun down. If the trigger sticks, the valve inside is the part to check first.
The swivel sits at the tail of the gun where the hose connects, and it lets the gun turn without twisting the hose. A 360° swivel helps keep the hose from kinking as you move.
The inlet fitting joins the gun to the hose, and the outlet fitting joins the gun to the wand or nozzle. Common sizes in this guide are M22-14 mm and M22-15 mm inlets, a 1/4 in quick connect outlet and a 1/4 in FNPT outlet, with a 3/8 in FNPT inlet on the Suttner. Match both ends before you order.
Seals sit inside the gun where the valve meets the body and keep high-pressure water from leaking at the joints, while the nozzle sets the spray pattern at the end of the gun. A stainless steel valve with a spring, needle, ball and seat resists wear, and a rinsing nozzle with a wide spray suits rinsing a car or a wall.
Match the gun to your washer
Start with the washer’s PSI rating and pick a gun rated at or above it. Three of the guns here carry PSI ratings of 3600, 4000 and 5000 PSI, and the RIDGE WASHER and Suttner guns are rated 12 GPM. Then check the fittings: M22-14 mm and M22-15 mm inlets on the short guns, a 1/4 in quick connect outlet on the Westinghouse and RIDGE WASHER, and a 3/8 in FNPT inlet with a 1/4 in FNPT outlet on the Suttner. The Westinghouse gun (on Amazon) is listed for gas and electric washers, but always check the fittings against your hose. See our hose sizes guide for the sizes.
When to replace a part and when to replace the gun
Replace a part when one piece fails and the rest of the gun still works: a worn nozzle, a tired seal or a bent quick connect fitting. Replace the whole gun when the trigger will not return, the body is cracked, or the valve leaks after a seal change.
Replacement guns that cover these parts
Each gun below is one unit that holds the trigger, valve and fittings. Pick the one whose fittings match your washer, check its PSI rating where one is stated, and choose a swivel model if you want one.
Safety
Never point the gun at people or animals. Keep the trigger locked when you set the gun down. Run a gas washer outdoors only, and refuel with the engine off and cool. Wear eye protection and keep children and pets away.
FAQ: mowing large lots
What parts wear out first on a pressure washer gun?
The trigger, the seals and the swivel move the most, so check them first when the gun starts to fail. A trigger that sticks, a fitting that weeps or a swivel that binds all point to a worn part, and a repairable valve can often be fixed with a seal change.
Do all pressure washer guns fit all washers?
No. Match the gun’s PSI rating to your washer, then match the fittings. The short guns here use M22-14 mm and M22-15 mm inlets with a 1/4 in quick connect outlet, while the Suttner uses a 3/8 in FNPT inlet and a 1/4 in FNPT outlet, so check your hose end before you order.
What does the swivel on a pressure washer gun do?
The swivel lets the gun turn without twisting the hose.
Can I use a pressure washer gun with a foam cannon?
Yes. The Westinghouse gun pairs with a foam cannon for car washing, and a 1/4 in quick connect outlet fits most foam cannons.




