Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Pull Behind Sprayer Parts: Wands and Nozzle Kits

Pull behind sprayer parts explained: what wands and nozzle kits do, which hose sizes and sprayer models each kit is stated for, and how to check fit.

Pull Behind Sprayer Parts: Wands and Nozzle Kits
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1QWORK 2-Piece All Metal Sprayer Wand Kit, 29 Inch, Adjustable NozzleQWORK 2-Piece All Metal Sprayer Wand Kit, 29 Inch, Adjustable Nozzle9.6/10View on Amazon
  2. 2Smith Performance Sprayers 182620 Kit with Brass Adjustable NozzleSmith Performance Sprayers 182620 Kit with Brass Adjustable Nozzle9.6/10View on Amazon
  3. 3Smith Performance Sprayers 182619 Nozzle Kit with Poly Adjustable NozzleSmith Performance Sprayers 182619 Nozzle Kit with Poly Adjustable Nozzle9.6/10View on Amazon
  4. 4CHAPIN Home and Garden Premium Nozzle KitCHAPIN Home and Garden Premium Nozzle Kit9.4/10View on Amazon

On a few acres, pull behind sprayer parts are the wand, nozzle, hose and pump parts that can be replaced one at a time. The wand carries the shutoff and the nozzle sets the spray pattern. This guide covers the wand and nozzle kits in the gear section below, and states the hose size or sprayer model each kit is made for. None of the kits below is a hose or a pump.

AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

QWORK 2-Piece All Metal Sprayer Wand Kit, 29 Inch, Adjustable Nozzle

QWORK 2-Piece All Metal Sprayer Wand Kit, 29 Inch, Adjustable Nozzle

QWORK9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

Two all-metal 29-inch sprayer wands with an adjustable nozzle, brass barbs and hose clamps.

Who it's for: owners replacing a worn wand on a sprayer with a 3/8-inch or 1/4-inch hose.

Who should skip it: buyers who need another hose size or a shorter wand.

The QWORK kit includes two all-metal sprayer wands at 29 inches, with stainless steel and brass construction, rubber grips and a metal handle with a lockable switch. The adjustable nozzle gives mist and straight stream, and the kit includes two brass barbs and two hose clamps. Install is cut the hose, slip on the clamps, insert the wand and tighten.

Pros

  • Two all-metal wands, so a spare is on hand
  • Adjustable nozzle gives mist and straight stream
  • Brass barbs fit both 3/8-inch and 1/4-inch hoses
  • Rubber grips and a lockable switch on the metal handle

Cons

  • No warranty term is stated
  • Fits most 3/8-inch and 1/4-inch hoses only
  • Install means cutting the hose to fit the new wand
  • No extra nozzles are included
Smith Performance Sprayers 182620 Kit with Brass Adjustable Nozzle

Smith Performance Sprayers 182620 Kit with Brass Adjustable Nozzle

Smith Performance Sprayers9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A nozzle kit with a brass adjustable nozzle, foaming nozzles and flat fan tips.

Who it's for: Smith sprayer owners who want a brass adjustable nozzle plus foaming and fan tips in one kit.

Who should skip it: buyers with another brand, or anyone who needs a wand.

The 182620 kit centers on a brass adjustable nozzle, with a poly cap nut, a Viton flat seal, a low volume foaming nozzle assembly and a high volume foaming nozzle. It also includes a red poly flat fan tip listed at 0.25 GPM with a 70 degree fan and a yellow poly flat fan tip listed at 0.15 GPM with a 30 degree fan. The kit is listed with the Smith Nl400 4-gallon backpack sprayer and the R200 and R300 sprayers.

Pros

  • Brass adjustable nozzle for a durable spray tip
  • Red and yellow flat fan tips at 0.25 and 0.15 GPM
  • Low and high volume foaming nozzles included
  • Viton flat seal included in the kit

Cons

  • No warranty term is stated
  • Made for Smith sprayers only
  • Nozzles only, no wand or hose
  • No flow rate is stated for the adjustable nozzle
Smith Performance Sprayers 182619 Nozzle Kit with Poly Adjustable Nozzle

Smith Performance Sprayers 182619 Nozzle Kit with Poly Adjustable Nozzle

Smith Performance Sprayers9.6/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A nozzle kit with a poly adjustable nozzle, foaming nozzles and flat fan tips.

Who it's for: Smith sprayer owners who want a poly adjustable nozzle plus foaming and fan tips in one kit.

Who should skip it: buyers who want a brass nozzle, or anyone with another brand.

The 182619 kit centers on a poly adjustable nozzle, with a poly cap nut, a Viton flat seal, a low volume foaming nozzle assembly and a high volume foaming nozzle. It also includes a red poly flat fan tip listed at 0.25 GPM with a 70 degree fan and a yellow poly flat fan tip listed at 0.15 GPM with a 30 degree fan. The kit is listed for the Smith Nl401 backpack sprayer and four 2-gallon Smith sprayers: deck, bleach, acid and foaming compression.

Pros

  • Poly adjustable nozzle plus low and high volume foaming nozzles
  • Red and yellow flat fan tips at 0.25 and 0.15 GPM
  • Fits Smith backpack, deck, bleach, acid and foaming sprayers
  • Viton flat seal included in the kit

Cons

  • Poly adjustable nozzle instead of brass
  • Made for Smith sprayers only
  • Nozzles only, no wand or hose
  • No flow rate is stated for the adjustable nozzle
CHAPIN Home and Garden Premium Nozzle Kit

CHAPIN Home and Garden Premium Nozzle Kit

CHAPIN9.4/10 Acre Score
i
The Acre Score (out of 100, shown as /10) weighs rated performance, build, value, safety listing and warranty. How we score

A replacement nozzle assembly for Chapin backpack sprayers.

Who it's for: Chapin backpack sprayer owners who need a straight replacement nozzle assembly.

Who should skip it: buyers who need a stated flow rate, fan tips or a wand.

The CHAPIN kit is a replacement nozzle assembly for all Chapin backpack sprayers. It gives two counts for this kit, a pack of 1 and 3 items, so confirm the count before ordering. It weighs 0.02 pounds and measures 6.0 by 6.0 by 6.0 inches.

Pros

  • Replacement nozzle assembly for Chapin backpack sprayers
  • Fits all Chapin backpack sprayers
  • Light at 0.02 pounds
  • Compact at 6.0 by 6.0 by 6.0 inches

Cons

  • Fits Chapin backpack sprayers only
  • A single nozzle assembly, with no fan tips or foaming nozzles
  • No flow rate or spray pattern is stated
  • No hose, wand or seal

Pull behind sprayer parts: what wears out first

The wand is a long tube with a handle and a shutoff valve, and the nozzle is a small tip that sets the spray pattern. The kits below cover those two parts only. A hose, a pump and other sprayer parts are not included in any of these kits, so check the sprayer manual for parts beyond the wand and nozzle.

Part What it does Fit
QWORK wand kit Replaces a worn wand 3/8 in and 1/4 in hoses
Smith 182620 kit Brass nozzle and fan tips Smith Nl400, R200, R300
Smith 182619 kit Poly nozzle and fan tips Smith Nl401, 190445, 190447, 190449, R200F
CHAPIN nozzle kit Replacement nozzle assembly Chapin backpack sprayers

See the garden sprayer parts guide for the common replacements, and the tow-behind attachments guides for the rest of the hitch gear.

How to match a nozzle to the job

Nozzles set the pattern, and the two Smith kits show the range. The QWORK adjustable nozzle (on Amazon) is stated for mist and straight stream, while a flat fan tip spreads the spray in a fan. The maker lists the red fan tip at 0.25 GPM with a 70 degree fan, and the yellow fan tip at 0.15 GPM with a 30 degree fan. Both Smith kits include low and high volume foaming nozzles.

Check the fit before you order

Sprayer parts fit by hose size and by brand. The QWORK wand kit fits most 3/8-inch and 1/4-inch hoses, with brass barbs and hose clamps in the box, and is not stated for a specific sprayer model. The Smith kits are made for the Smith backpack and compression sprayer models named in the table, not for pull-behind sprayers. The CHAPIN kit (on Amazon) fits Chapin backpack sprayers only, and it gives two counts, a pack of 1 and 3 items, so confirm the count before ordering.

The gear: wands and nozzle kits

The gear below starts with a replacement wand and follows with three nozzle kits.

Safety

Wear eye protection and sturdy shoes when you work on a sprayer, and keep the nozzle pointed away from people and animals. Check hose clamps and barbs for leaks before a pass, and follow the sprayer manual.

FAQ: mowing large lots

Which parts do these kits cover?

These kits cover the wand and the nozzle. The QWORK kit replaces a wand, the Smith kits include nozzle tips and a Viton flat seal, and the CHAPIN kit is a replacement nozzle assembly with no seal stated.

Which hoses does the QWORK wand fit?

It fits most 3/8-inch and 1/4-inch hoses, with brass barbs and hose clamps in the box.

What is the difference between the two Smith nozzle kits?

The 182620 kit has a brass adjustable nozzle and the 182619 kit has a poly one. Both include the same foaming nozzles and the same red and yellow flat fan tips.

What do the red and yellow fan tips do?

The maker lists the red tip at 0.25 GPM with a 70 degree fan, and the yellow tip at 0.15 GPM with a 30 degree fan.

Does the CHAPIN nozzle kit fit a pull-behind sprayer?

No. It is stated as a replacement nozzle assembly for Chapin backpack sprayers only. It gives two counts, a pack of 1 and 3 items, so confirm the count.

More mowing guides

See the garden sprayer parts guide for the rest.

More buying guides

Tow-Behind Attachments ·

Box Blade Replacement Parts Guide

Box blade replacement parts matched by shank length, hole spacing, tooth taper and pin fit for grading and leveling work.