Stihl Chainsaw Bar Size Chart
Measure your Stihl bar the right way, match pitch, gauge and drive links, and pick a bar length that fits your saw and the wood you cut.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Oregon 20 in Bar and Chain Combo, .325 Pitch, 81 Drive Links9.7/10View on Amazon - 2
Oregon 16 in Bar and Chain Combo, 3/8 Pitch, 56 Drive Links9.6/10View on Amazon - 3
NEO-TEC 28 in Laminated Bar and Chain Combo, 3/8 Pitch, 92 Drive Links9.6/10View on Amazon
When the chain on your Stihl saw no longer fits the bar, or the bar itself is worn, the fix starts with a few measurements: the bar length, the chain pitch and the chain gauge, plus the drive link count. This stihl chainsaw bar size chart shows how to measure a bar and read those numbers, so a replacement bar and chain matches your saw. The combos below cover 16 in, 20 in and 28 in sizes, and each one states the pitch, gauge and drive links it needs.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.

Oregon 20 in Bar and Chain Combo, .325 Pitch, 81 Drive Links
20 in bar and chain combo with .325 pitch, .063 gauge and 81 drive links for Stihl saws up to 62 cc.
Who it's for: owners of mid-size Stihl saws up to 62 cc who need a 20 in bar and chain combo.
Who should skip it: anyone whose saw needs a different bar length, pitch or gauge.
The listing states a 20 in bar with .325 pitch, .063 gauge chain and 81 drive links, with a D025 mount, and it fits Stihl models up to 62 cc. The L81 chain has the LubriTec oiling system, which keeps the chain and guide bar oiled, and the chain is designed for low kickback and low vibration. The listing gives a weight of 3.4 lb and a size of 29.0 by 0.25 by 5.0 inches.
Pros
- 20 in bar with .325 pitch, .063 gauge and 81 drive links stated
- Fits Stihl models up to 62 cc, with a long model list stated
- LubriTec oiling system keeps the chain and bar oiled
- Low kickback and low vibration design
Cons
- Fits saws up to 62 cc, so larger saws need a different bar
- Not Guard Mate Compatible
- 3.4 lb, heavier than the 16 in Oregon combo at 1.0 lb
- Confirm fit with the owner's manual, as listed models may have different sprocket or bar lengths

Oregon 16 in Bar and Chain Combo, 3/8 Pitch, 56 Drive Links
16 in bar and chain combo with 3/8 in low profile pitch, .050 gauge and 56 drive links for saws up to 42 cc.
Who it's for: owners of smaller saws up to 42 cc who need a 16 in bar and chain combo.
Who should skip it: anyone whose saw needs a longer bar or a different pitch or gauge.
The listing states a 16 in bar with 3/8 in low profile pitch, .050 gauge chain and 56 drive links, with an A041 mount, and it fits models up to 42 cc. The S56 chain has the LubriTec oiling system, which keeps the chain and guide bar oiled. The listing gives a weight of 1.0 lb.
Pros
- 16 in bar with 3/8 in low profile pitch, .050 gauge and 56 drive links
- Fits a wide range of models up to 42 cc, with a long model list stated
- LubriTec oiling system keeps the chain and bar oiled
- 1.0 lb, less than the 20 in Oregon combo at 3.4 lb
Cons
- Fits saws up to 42 cc, so larger saws need a different bar
- No warranty term is stated
- 16 in bar covers less per cut than the 20 in and 28 in combos
- The listing names many fit models, so check your model against the list before ordering

NEO-TEC 28 in Laminated Bar and Chain Combo, 3/8 Pitch, 92 Drive Links
28 in laminated bar and chain combo with 3/8 pitch, 0.063 gauge and 92 drive links for large Stihl saws.
Who it's for: owners of large Stihl saws who need a 28 in bar and chain combo.
Who should skip it: anyone with a smaller saw, or anyone who needs a different pitch, gauge or link count.
The listing states a 28 in laminated bar with 3/8 pitch, 0.063 gauge and a 92-link chain, with a D025 tail mount, and it fits Stihl models from the 026 PRO to the MS 661. The bar replaces Oregon 283RNDD025, 283SFHD025, 283ATMD025 and 283DXLMD025. No weight is stated.
Pros
- 28 in laminated bar with 3/8 pitch, 0.063 gauge and 92 drive links
- Fits a long list of Stihl models, from 026 PRO to MS 661
- Replacement for Oregon 283RNDD025 and other Oregon bars stated
- D025 tail mount matches the Oregon 20 in combo
Cons
- Weight is not stated
- No warranty term is stated
- Only fits chains with 0.063 gauge and 92 drive links
- Fit is limited to the Stihl models in the stated list
How to measure your Stihl bar
Measure the bar from the tip to the point where it enters the saw body: that cutting length is the bar size, such as 16 in, 20 in or 28 in. Do not measure the whole bar, including the part hidden inside the housing, because the listed size is the part that cuts. If the old chain is still on the saw, count its drive links, the teeth that sit in the bar groove, and read the pitch and gauge stamped on the bar or the old chain. Our how to measure chainsaw chain size guide covers the chain side of the same job.
Read the pitch, gauge and drive links
Pitch, gauge and drive link count must all match the bar and the saw. Pitch is the chain size, and the combos here use .325 in, 3/8 in low profile or 3/8 in; gauge is the thickness of the drive link, and the combos here use .050 in or .063 in. Drive links are counted on the chain, and the combos here use 56, 81 or 92. A chain that matches on length but not on pitch or gauge will not fit the bar or the sprocket, so check all three numbers before you order. See our 3/8 vs .325 chainsaw chain guide for the two pitches in this group.
| Combo | Bar | Pitch | Gauge | Drive links |
|---|---|---|---|---|
| Oregon 20 in Bar Chain | 20 in | .325 in | .063 in | 81 |
| Oregon 16 in Bar Chain | 16 in | 3/8 in low profile | .050 in | 56 |
| NEO-TEC 28 in Bar Chain | 28 in | 3/8 in | 0.063 in | 92 |
Stihl chainsaw bar size chart: the gear
Once you have the bar length, pitch, gauge and drive link count, these combos match a bar and chain to your saw by size.
Safety
Wear eye and hearing protection, and clear sticks, stones and debris before you cut. Fit the bar and chain with the saw off and cool, and check the manual for the right bar length, pitch and gauge before you order. Keep children and pets out of the work area.
FAQ: mowing large lots
How do I measure my Stihl chainsaw bar?
Measure from the tip of the bar to where it enters the saw body; that cutting length is the bar size, such as 16 in, 20 in or 28 in. Do not measure the whole bar, including the part hidden inside the housing.
What do pitch, gauge and drive links mean?
Pitch is the chain size, such as .325 in, 3/8 in low profile or 3/8 in; gauge is the thickness of the drive link, such as .050 in or .063 in; drive links are counted on the chain, such as 56, 81 or 92 in the combos here.
Can I put a longer bar on my Stihl saw?
Only if the saw and the chain match: the Oregon 20 in combo fits Stihl models up to 62 cc, and the Oregon 16 in combo fits models up to 42 cc. Check the manual for the bar lengths your saw takes.
How do I know which Oregon combo fits my Stihl?
Match the bar length, pitch, gauge, drive link count and mount: the 20 in combo uses a D025 mount and the 16 in combo uses an A041 mount, and each lists the models it fits.
What is the difference between the 20 in and 16 in Oregon combos?
The 20 in combo has a .325 pitch, .063 gauge and 81 drive links for saws up to 62 cc, while the 16 in combo has a 3/8 low profile pitch, .050 gauge and 56 drive links for saws up to 42 cc.




