Zero Turn Mower Maintenance Kit: What to Include
A zero turn mower maintenance kit holds the service filters and, in many kits, the spark plugs for a full service, matched to your mower model and engine.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Husqvarna MZ619.7/10View on Amazon - 2
hightall Spring-Damper Suspension Seat for Zero-Turn Mowers9.6/10View on Amazon - 3
Ariens Zenith 609.5/10View on Amazon
Across a few acres of lawn, a zero-turn mower earns its keep in long mowing days, and a zero turn mower maintenance kit is the box of service filters and, in many kits, spark plugs that keeps it running through the season. The kit holds the parts a routine service needs, matched to the mower model and engine, so the air stays clean, the oil stays clean, and the plugs fire when the key turns. This guide shows what goes in the kit, how to match it to a mower, and how to work through each part in order.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Zero turn mower maintenance kit: what goes in it
A maintenance kit groups the wear parts of a routine service into a box that matches a mower model and engine family. Most kits hold an air filter, an oil filter, a fuel filter and spark plugs. Some add a pre-cleaner for the air filter, a secondary air filter element, a hydraulic oil filter or an HST filter for machines with an HST drive. The AxleyHub kit (on Amazon) for the Kubota ZD1211L-3 holds 8 pieces: 1 primary air filter, 1 secondary air filter, 1 oil filter, 3 fuel filters, 1 transmission oil suction filter and 1 HST filter. The AxleyHub kit for the Scag Tiger Cat II holds 7 pieces: 1 primary air filter, 1 secondary air filter, 1 oil filter, 1 fuel filter, 1 hydraulic oil filter and 2 spark plugs.
| Kit | What the box holds | Fit note |
|---|---|---|
| AxleyHub kit for Kubota ZD1211L-3 | 8 pieces: 1 primary air filter, 1 secondary air filter, 1 oil filter, 3 fuel filters, 1 transmission oil suction filter, 1 HST filter | Lists part numbers K318182240 and K318182250 |
| AxleyHub kit for Scag Tiger Cat II | 7 pieces: 1 primary air filter, 1 secondary air filter, 1 oil filter, 1 fuel filter, 1 hydraulic oil filter, 2 spark plugs | Lists part numbers 2508301S and 2508304S |
| DASARYA kit for Kawasaki FR691V engines | 2 air filters, 2 pre-cleaners, 2 oil filters, 2 fuel filters, 2 spark plugs, 4 clamps, 1 shut-off valve, 1 fuel line | Fits FR651V, FR691V and FR730V engines |
| QNHEAY kit for Bad Boy zero-turn mowers | 5 pieces: 1 air filter, 1 fuel filter, 2 spark plugs, 1 oil filter | Lists replacement part numbers for air, oil and fuel filters and spark plugs |
The zero-turn mower hub lists the mower guides on this site, and the zero-turn mower maintenance schedule sets out the timing for each service. Sharp blades matter as much as fresh filters: see the best mower blade sharpener for zero-turn mowers picks.
Step 1: match the kit to your mower
Start with the mower model and the engine model, then read the kit listing for those names. A kit listed for a Kawasaki FR651V, FR691V or FR730V engine is not listed for a Kohler Command Twin 23, 25 or 27HP engine, and a kit listed for a John Deere Z930M is not listed for a Cub Cadet ZT1-50. The Grassupp kit (on Amazon) lists Cub Cadet, Hustler, Toro, John Deere, Exmark, Gravely and BobCat mowers, so a wide fit list still needs a check against the mower in the shed. Compare the replacement part numbers on the kit with the numbers on the old filters and plugs before ordering: the Dokili kit (on Amazon) replaces primary air filter M131802 and oil filter AM107423, while the WHFZN kit (on Amazon) replaces air filter MIU13120.
Step 2: change the air filter and pre-cleaner
The air filter keeps grass dust out of the engine, and the pre-cleaner catches the larger debris before it reaches the filter. The Dokili kit holds a primary air filter, an engine oil filter, an inline fuel filter and spark plugs, and the WHFZN kit pairs an MIU13120 air filter with a 593217 pre-cleaner for 23-28 HP V-Twin engines. Lift the old filter out, clear the housing of loose debris, and seat the fresh filter so the seal sits flat. A filter that fits loose lets dust past it, so check the fit before the cover goes back on.
Step 3: change the oil filter and fuel filter
The oil filter strains wear metal and dirt out of the engine oil, and the fuel filter strains impurities out of the fuel on the way to the engine. The RAParts kit states its oil filter at a height of 2.26 inches, a micron value of 30, an outside diameter of 2.96 inches and a relief pressure of 10 – 20 PSI, with a thread size of 3/4-16. Drain the oil with the engine off and cool, spin the old oil filter off, and fit the fresh filter by hand until the gasket seats. Fit the fresh fuel filter with the flow arrow pointing toward the engine, and check the clamps and fuel line for cracks before the engine runs again.
Step 4: fit fresh spark plugs
Spark plugs fire the fuel mix in each cylinder, and worn plugs make a mower hard to start and rough at idle. Most of the kits hold 2 spark plugs: the DASARYA kit (on Amazon), the Scag kit and the Bad Boy kit each hold 2, while the Dokili kit holds 2 spark plugs with a pair of work gloves. Match the plug part number to the engine: the Dokili kit replaces spark plug 6578 and BPR4ES, and the RAParts kit replaces NGK BPR4ES and 6578. Gap and torque stay with the mower manual, since the listings state no gap or torque figures.
Step 5: store the kit and plan the season
Keep spare filters and plugs in a dry place out of dust, with the part numbers where they can be read at a glance. A kit bought for spring service can sit on the shelf until the mowing season starts, and a kit with a stated warranty carries cover for the term the maker lists: the AxleyHub kits carry a 1-year warranty, the wzyufon kit carries a 12 month warranty, and the Dokili kit carries a 3 Months warranty. Check the stored kit against the mower before the season starts, so a wrong kit is found on the shelf and not on the mower.
FAQ: mowing large lots
What is in a zero turn mower maintenance kit?
A kit holds the filters and spark plugs for a routine service: an air filter, an oil filter, a fuel filter and spark plugs, matched to a mower model and engine. Some kits add a pre-cleaner, a secondary air filter, a hydraulic oil filter or an HST filter. The Kubota kit holds 8 pieces and the Scag kit holds 7 pieces, so the count varies by machine.
How do I know a kit fits my mower?
Match the mower model and the engine model to the fit list on the kit, then compare the replacement part numbers with the numbers on the old filters and plugs. The DASARYA kit fits Kawasaki FR651V, FR691V and FR730V engines, while the Cirecsiy kit fits Kohler Command Twin 23, 25 and 27HP engines. When the model is absent from the fit list, compare the part numbers before ordering.
Do I need a hydraulic filter in the kit?
It depends on the machine. The Kubota kit holds 1 transmission oil suction filter and 1 HST filter, and the Scag kit holds 1 hydraulic oil filter, so the drive filters in the box vary by machine. Check the manual for the drive type and the filter part numbers before ordering.
How long is the warranty on a maintenance kit?
The term varies by maker. The AxleyHub kits state a 1-year warranty, the wzyufon kit states a 12 month warranty, and the Dokili kit states a 3 Months warranty. The DASARYA kit states a worry-free warranty with no term, so read the listing for the term before ordering.
Can a kit fit several mower models?
Yes, when the fit list names several models. The Grassupp kit lists Cub Cadet, Hustler, Toro, John Deere, Exmark, Gravely and BobCat mowers, and the Dokili kit fits John Deere Z930M, Z930R, Z950R and Z950M mowers. A shared engine still needs a check of the part numbers, since a shared engine does not mean a shared filter.




