Bar and Chain Oil vs Motor Oil: Which One Should You Buy?
Bar and chain oil clings to the bar and chain, while motor oil is made for engines, so the oils are not interchangeable.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Oregon Premium Bar and Chain Oil 1 Gallon9.6/10View on Amazon - 2
16 oz. Biodegradable Bar and Chain OilView on Amazon - 3
32 oz. Biodegradable Bar and Chain OilView on Amazon - 4
STP Bar and Chain OilView on Amazon - 5
Mag 1 Premium Bar and Chain OilView on Amazon - 6
Premium All-Season Bar and Chain OilView on Amazon - 7
Kawasaki 99969-6506 Bar & Chain Oil GallonView on Amazon
A chainsaw bar runs hot, throws chips and drags a chain around the bar at speed, and the oil in the reservoir is what keeps that bar and chain from wearing out early. The short answer to bar and chain oil vs motor oil is simple: use bar and chain oil on the bar and chain, and keep motor oil for engines. The four oils below are all bar and chain oils; no motor oil is among them, so this guide compares the bar oils against each other and explains what motor oil is made for.
Other machines to compare
16 oz. Biodegradable Bar and Chain OilCheck price on Amazon
32 oz. Biodegradable Bar and Chain OilCheck price on Amazon
STP Bar and Chain OilCheck price on Amazon
Mag 1 Premium Bar and Chain OilCheck price on Amazon
Premium All-Season Bar and Chain OilCheck price on Amazon
Kawasaki 99969-6506 Bar & Chain Oil GallonCheck price on Amazon
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Bar and chain oil vs motor oil: what each oil is made for
Bar and chain oil is made to cling. The Oregon, STP and Prime Guard oils describe tackiness, a tackifier additive and a high-tack formula, all meant to keep oil on the chain at speed instead of flinging off. Oregon calls out extra tackiness and a high film strength that guards metal parts against corrosion and rust, while STP pairs its ZDDP anti-wear agent with a tackifier that cuts throw-off at high speeds. The STP oil states plainly that it is not for engines, and that bar oil belongs on the bar and chain only. One oil is built to stay on a moving chain, the other is built for the inside of an engine.
| Oil | Size | Made for | Stated edge |
|---|---|---|---|
| DEWALT Biodegradable Bar and Chain Oil | 1 gallon, 128 oz | Gas and electric saws, pole saw | Soy-based, -15°F to 500°F |
| Oregon Premium Bar and Chain Oil | 1 quart, 32 fl oz | Gas and electric chainsaws, pole saws | Extra tackiness, high film strength |
| STP Premium Chainsaw Bar Oil | 32 fl oz | Fuel, electric and battery chainsaws | ZDDP anti-wear, tackifier |
| Prime Guard Premium Bar and Chain Oil | 1 gallon | Gas and electric chainsaws | High-tack formula, all-season |
The four bar oils in this guide
The four oils below run from the biodegradable gallon to the high-tack gallon.
DEWALT Biodegradable Bar and Chain Oil, 1 gallon. The DEWALT is the biodegradable gallon here: a soy-based, non-toxic oil the maker lists for gas and electric saws and pole saws, with protection from -15°F to 500°F. The maker states up to a 300% higher viscosity index than conventional petroleum chain oils, and describes the formula as ultraclean.
Oregon Premium Bar and Chain Oil, 1 quart. The Oregon is the quart here: a 32 fl oz bottle the maker lists for gas and electric chainsaws, pole saws and hedge trimmers, and for all chainsaw brands. The maker states extra tackiness for smoother cuts, a high film strength that guards metal parts against corrosion and rust, and resistance to resin, sap and gum buildup.
STP Premium Chainsaw Bar Oil, 32 fl oz. The STP is the ready-to-use bottle here: a 32 fl oz bottle with a ZDDP anti-wear agent and a tackifier additive, made to pour straight into the oil reservoir with no mixing. The maker states less throw-off at high speeds, less resin buildup and smoother cuts across fuel, electric and battery chainsaws. The maker also states plainly that this oil is not an engine oil and belongs on the bar and chain only.
Prime Guard Premium Bar and Chain Oil, 1 gallon. The Prime Guard is the high-tack gallon here: a 1 gallon bottle with a tackiness agent that helps the oil cling to chains and guide bars at high speed. The maker states all-season protection in low-temperature and high-temperature conditions, less wear on bars and chains, and sizes in quart and gallon. It suits gas and electric chainsaws.
When bar oil is the right choice
Bar oil is the right choice whenever the chain runs. Tackiness keeps the oil on the chain at speed, and the ZDDP anti-wear agent in the STP and the film strength in the Oregon guard the bar and chain against wear. The DEWALT, Oregon and Prime Guard list all-season use, and the DEWALT lists a range from -15°F to 500°F, so the DEWALT bottle covers cold mornings and hot work. See the chainsaw maintenance guide.
When motor oil stays in the engine
Motor oil stays in the engine because that is the job it is made for. The STP oil states that it is not an engine oil and should be used only for the bar and chain. Bar oil is made to cling to a chain that flings oil off at speed, and no motor oil is among the four oils here. If the reservoir calls for bar and chain oil, pour bar and chain oil.
How to match the oil to the saw
Match the oil to the saw by size and use. A gallon suits a saw that runs often, while a quart suits a saw that runs now and then. The DEWALT and Prime Guard come in 1 gallon bottles, and the Oregon and STP come in 32 fl oz bottles. The STP bottle pours into the oil reservoir as directed in the chainsaw manual, and the Oregon bottle covers gas and electric chainsaws, pole saws and hedge trimmers.
Safety
Wear eye and hearing protection when the saw runs, clear sticks and stones from the work area, and keep children, pets and bystanders away. Refuel only with the engine off and cool, and store oil upright where it cannot spill. See chainsaw safety gear for the rest of the kit.
FAQ: mowing large lots
Can motor oil go on a chainsaw bar?
Use bar and chain oil instead. The Oregon, STP and Prime Guard oils are made to cling to the chain with tackiness or a tackifier, and the STP oil states that it is not an engine oil and belongs on the bar and chain only. Motor oil carries no cling claim in this guide, and no motor oil is among the four oils.
What does bar and chain oil do that motor oil does not?
It stays on the chain. The Oregon oil states extra tackiness and a high film strength, the STP oil pairs a ZDDP anti-wear agent with a tackifier, and the Prime Guard oil uses a high-tack formula to cling at high speed.
Is biodegradable bar oil as good as regular bar oil?
The DEWALT biodegradable oil states up to a 300% higher viscosity index than conventional petroleum chain oils, with protection from -15°F to 500°F. It is soy-based and non-toxic, and the maker lists it for gas and electric saws and pole saws.
What size bar oil is needed?
Match the size to how much cutting is planned. The DEWALT and Prime Guard come in 1 gallon bottles, and the Oregon and STP come in 32 fl oz bottles, with the Prime Guard also coming in a quart size. A gallon suits a saw that runs often; a quart suits a saw that runs now and then.
Can bar and chain oil go in an engine?
No. The STP oil states that it is not an engine oil and should be used only for the bar and chain. Bar oil is made to cling to a chain, not to lubricate an engine, so keep it out of the fuel tank and the crankcase.
More mowing guides
- Best Chainsaw (2026): 5 Picks for Cutting and Pruning
- Chainsaw Maintenance: Routine Care Checklist
- Chainsaw Sizes and Bar Lengths Explained
- Chainsaw Guide Bar: How to Choose the Right Length
See the mower maintenance hub for the rest of the upkeep guides.




