Best Fence Pliers (2026): 5 Picks for Fence Repair
Five fencing pliers compared by length, cutting capacity, build and warranty for fence repair, from a 10 inch multi-tool to a 10-1/2 inch TEKTON.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCrescent Fence Tool9.7/10View on Amazon - 2
Best Cutting CapacityTEKTON Fencing Pliers9.7/10View on Amazon - 3
Best Multi-ToolWORKPRO Fencing Pliers9.6/10View on Amazon - 4
Best Side-CuttingChannellock 859.6/10View on Amazon - 5
Best for StaplesBates Fence Tool9.5/10View on Amazon
A fence line across rough ground, with wire to stretch and staples to pull, is where the best fence pliers earn their place in the toolbox. The five below are multi-function fencing pliers, from a 10 inch tool to a 10-1/2 inch tool, and we give the length, cutting capacity, build and warranty from each listing.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall Crescent Fence Tool: Solid joint tool with a standard limited lifetime warranty Check price on Amazon
- Best Cutting Capacity TEKTON Fencing Pliers: Cuts steel wire 8-18 AWG, with splicer and shears Check price on Amazon
- Best Multi-Tool WORKPRO Fencing Pliers: Six functions in one CR-V steel tool Check price on Amazon
- Best Side-Cutting Channellock 85: Side-cutting pliers with a 3/4 inch jaw Check price on Amazon
- Best for Staples Bates Fence Tool: Hammer head, staple grips and 7/32 inch cutting Check price on Amazon
Our acreage picks

Crescent 10 in Heavy-Duty Solid Joint Fence Tool Pliers
A 10 inch heavy-duty solid joint fence tool with an angled head for offset cutting, a staple puller and a dipped grip.
Who it's for: owners who want a solid joint fence tool with a lifetime warranty for wire cutting and staple pulling.
Who should skip it: owners who need a stated cutting capacity or a wire splicer.
Crescent lists a 10 inch heavy-duty solid joint fence tool with an angled head for offset cutting, a staple puller and a dipped grip. The maker describes a polished head of corrosion-resistant alloy steel that resists rust and corrosion, and states a standard limited lifetime warranty. The tool weighs 1.65 pounds.
Pros
- Standard limited lifetime warranty stated
- Angled head for offset cutting
- Staple puller built in
- Dipped grip that is easy to clean and hold
Cons
- No cutting capacity figure is stated
- 10 inch length, shorter than the 10-1/2 inch TEKTON
- Suits fence work; owners who need a wire splicer will want the TEKTON
- Multi is the only color listed

TEKTON 10-1/2 in Fencing Pliers
A 10-1/2 inch fencing pliers with a staple and nail puller, a wire splicer, a striking face and wire cutting shears.
Who it's for: owners who cut and splice wire and pull staples and nails on fence lines.
Who should skip it: owners who want a stated warranty term with a concrete length, or a hammer head.
TEKTON lists a 10-1/2 inch fencing pliers with parallel jaws for staple and nail pulling, a wire splicer, a striking face and wire cutting shears. The maker states induction-hardened shears close to the pivot pin for leverage, with angled 80-degree teeth for a slicing action. Cutting capacity covers solid galvanized or coated steel wire from 8 to 18 AWG, solid aluminum wire from 6 to 18 AWG, and barbed or barbless two-strand wires from 12.5 to 18 AWG. The tool weighs 1.68 pounds, and the maker states no time limits and no receipts for warranty claims.
Pros
- Cuts solid steel wire from 8 to 18 AWG
- Wire splicer in the top and bottom jaws
- Striking face for driving the claw under a staple
- Induction-hardened wire shears close to the pivot for leverage
Cons
- Weighs 1.68 pounds, the heaviest of the five
- Longest tool here at 10-1/2 inches, so it takes the most room in a toolbox
- Suits fence work; owners who want a hammer head will want the Bates or WORKPRO
- No handle material is stated

WORKPRO 10 in Fencing Pliers, Multi Fence Tool
A 10 inch multi-function fence pliers with six functions, built from CR-V steel with an ergonomic handle.
Who it's for: owners who want one tool for cutting, pulling, gripping and hammering on fence jobs.
Who should skip it: owners who need a stated cutting capacity or a warranty term.
WORKPRO lists a 10 inch fence pliers that combines six functions: wire cutting, nail pulling, staple removal, gripping, hammering and twisting. The maker describes a heavy-duty CR-V steel build with a blackened finish and precision polishing, and an ergonomic handle that fits the hand and reduces hand strain. The tool suits installing, maintaining and repairing fences.
Pros
- Six functions: wire cutting, nail pulling, staple removal, gripping, hammering and twisting
- CR-V steel build with a blackened finish
- Ergonomic handle that reduces hand strain
- Suits farmers, ranchers, contractors and homeowners
Cons
- No warranty term is stated
- No cutting capacity figure is stated
- No weight is stated
- Red is the only color listed

Channellock 85 Fence-Tool Pliers, 10 in, 3/4 in Jaw
A 10 inch side-cutting fence-tool pliers with a 3/4 inch jaw for cables, wires and fencing tasks.
Who it's for: owners who want a side-cutting pliers for chainlink fence repairs and general cutting.
Who should skip it: owners who need a staple puller or a hammer head.
Channellock lists a 10 inch side-cutting fence-tool pliers with a 3/4 inch jaw, built for cables, wires and fencing tasks. The maker describes a comfortable grip that reduces hand fatigue, a soft jaw construction for a firm grip without damaging surfaces, and a diagonal edge for clean, accurate cuts. The tool weighs 1.38 pounds.
Pros
- Side-cutting edge for clean, accurate cuts
- 3/4 inch jaw
- Comfortable grip that reduces hand fatigue
- Works as a fencing plier, lineman pliers or compound pliers
Cons
- No cutting capacity figure is stated
- Light Blue is the only color listed
- Metal and plastic build rather than all steel
- 10 inch length with a 3/4 inch jaw suits light cutting; owners who cut thick wire will want the TEKTON

Bates Multi-Plier Fence Tool, 10 in, Nail and Staple Puller
A 10 inch multi-plier fence tool with a hammer head, two wire cutters, staple grips and a wire grip for stretching wire.
Who it's for: owners who want a hammer head and staple grips in one fence tool.
Who should skip it: owners who need a stated warranty term or a wire splicer.
Bates lists a multi-plier fence tool with a corrugated hammer head, two wire cutters, staple grips and a wire grip for stretching wire. The maker states a 7/32 inch cutting capacity, a polished steel alloy build that resists rust, and a soft plastic coated grip. The tool suits fence repair, nail removal, staple pulling, wire cutting, construction, carpentry and gardening use.
The maker gives two lengths, 10.8 and 10 inches; check before ordering.
Pros
- 7/32 inch cutting capacity
- Corrugated hammer head, two wire cutters, staple grips and wire grip
- Polished steel alloy that resists rust
- Soft plastic coated grip
Cons
- No warranty term is stated
- Black is the only color listed
- 10 inch length, shorter than the 10-1/2 inch TEKTON
- Suits fence repair; owners who want a stated cutting capacity by wire gauge will want the TEKTON
Other machines to compare
Crescent 8" Button Fence PliersCheck price on Amazon
Maasdam 8090 Fence PliersCheck price on Amazon
Crescent Dipped-Handle Heavy-Duty Solid Joint Fence PliersCheck price on Amazon
Side-by-side specs
| Pliers | Acre Score | Length | Cutting capacity | Material | Warranty |
|---|---|---|---|---|---|
| Crescent Fence Tool | 9.7/10 | 10 in | Not stated | Alloy steel | Standard limited lifetime |
| TEKTON Fencing Pliers | 9.7/10 | 10-1/2 in | 8-18 AWG steel wire | Not stated | Not stated |
| WORKPRO Fencing Pliers | 9.6/10 | 10 in | Not stated | CR-V steel | Not stated |
| Channellock 85 | 9.6/10 | 10 in | Not stated | Metal and plastic | Not stated |
| Bates Fence Tool | 9.5/10 | 10 in | 7/32 in | Steel alloy | Not stated |
We report what each manufacturer rates on its listing, as gathered 20 November 2026.
Acreage and terrain fit
Crescent Fence Tool
TEKTON Fencing Pliers
WORKPRO Fencing Pliers
Channellock 85
Bates Fence Tool
Buying guide: choosing the best fence pliers
Length and jaw
Four of the five tools measure 10 inches, and the TEKTON measures 10-1/2 inches, the longest here. The Channellock is the only one that states a jaw size, a 3/4 inch jaw. A longer tool gives more leverage at the pivot, while a 10 inch tool fits a smaller pouch or box.
Cutting capacity
Only two listings state a cutting capacity. The TEKTON covers solid galvanized or coated steel wire from 8 to 18 AWG, solid aluminum wire from 6 to 18 AWG, and barbed or barbless two-strand wires from 12.5 to 18 AWG. The Bates tool states a 7/32 inch cutting capacity.
Functions in one tool
A fence pliers earns its place by doing more than cutting. The WORKPRO tool combines six functions: wire cutting, nail pulling, staple removal, gripping, hammering and twisting. The Bates tool adds a corrugated hammer head, two wire cutters, staple grips and a wire grip for stretching wire. The TEKTON tool adds a wire splicer and a striking face, and the Crescent tool pairs wire cutting with a staple puller. The Channellock is the plainest here, a side-cutting pliers for cables, wires and fencing tasks. For posts and pulling, see the best fence post puller and the best T post puller.
Steel and grips
Build differs more than length does. The WORKPRO tool is CR-V steel with a blackened finish and precision polishing. The Crescent tool uses a corrosion-resistant alloy steel with a polished head, and the Bates tool is polished steel alloy, while the Channellock is metal and plastic. Grips differ too: a soft plastic coated grip on the Bates, a dipped grip on the Crescent, an ergonomic handle on the WORKPRO and a comfortable grip on the Channellock.
Warranty
Warranty is the clearest split here. The Crescent tool states a standard limited lifetime warranty. The TEKTON listing states no time limits and no receipts for warranty claims, and the Bates, WORKPRO and Channellock listings state no warranty term.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
Matching It to Your Property
- The five tools run 10 to 10-1/2 inches, so they ride along on fence walks without a separate case.
- The WORKPRO and TEKTON tools combine cutting, pulling and hammering, so one tool covers a fence repair walk.
- The Crescent tool weighs 1.65 pounds, the Channellock 1.38 pounds and the TEKTON 1.68 pounds.
- The Bates tool has a soft plastic coated grip and the Crescent a dipped grip for long jobs.
The Acre Score explained
The Acre Score weighs five factors: performance (length, cutting capacity, functions), build quality (steel, joints, grips), value (specs for the money), safety (stated safety features) and warranty (years and coverage). A factor the listing does not state scores zero. Only the Crescent tool states a warranty term with a concrete length, a standard limited lifetime warranty, and the TEKTON listing states no time limits and no receipts for warranty claims.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Crescent Fence Tool | 9.7 | 29 | 21 | 20 | n/a | 4 |
| TEKTON Fencing Pliers | 9.7 | 32 | 22 | 21 | n/a | 0 |
| WORKPRO Fencing Pliers | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Channellock 85 | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Bates Fence Tool | 9.5 | 28 | 20 | 19 | n/a | 0 |
Each score is a linear conversion of the weighted total onto the 9.2 and 9.8 bounds; more points move a pick up the scale. Powered machines get safety points, as do listings that name safety features; manual items are scored out of 90.
FAQ: mowing large lots
How do you use chain link fence pliers?
The Channellock listing describes side-cutting pliers for chainlink fence repairs, with a 10 inch length and a 3/4 inch jaw. The diagonal edge gives clean, accurate cuts, and the soft jaw grips without damaging surfaces.
How do you use fence tool pliers?
Fence tool pliers combine cutting, pulling, gripping and hammering in one tool. The WORKPRO tool lists six functions, and the Bates tool lists a hammer head, two wire cutters, staple grips and a wire grip for stretching wire.
What wire can fence pliers cut?
The TEKTON tool cuts solid galvanized or coated steel wire from 8 to 18 AWG, solid aluminum wire from 6 to 18 AWG, and barbed or barbless two-strand wires from 12.5 to 18 AWG. The Bates tool states a 7/32 inch cutting capacity.
Do fence pliers come with a warranty?
The Crescent tool states a standard limited lifetime warranty, and the TEKTON listing states no time limits and no receipts for warranty claims. The Bates, WORKPRO and Channellock listings state no warranty term.
More mowing guides
- Best Fence Post Puller: 4 Picks for Fence Work
- Best T Post Puller: 5 Picks for Fence Posts
- Best Gate Latch (2026): 5 Picks for Fences and Gates
- Best No Dig Fence (2026): 5 Picks for Yards and Gardens
- Vinyl vs Chain Link Fence: Which One Should You Buy?
- Steel vs Wood Fence Posts: Which One Should You Buy?
- Best Gate Hinges Heavy Duty (2026): 5 Picks for Wooden Fences and Driveway Gates
- Post Driver Manual: Set Fence Posts by Hand
- Best Handheld Post Driver (2026): 5 Picks for Fence Work
- Best Post Hole Digger for Fence Posts (2026)
- Best Long Handle Post Driver (2026): 5 Fence Picks
- Best Gas Post Hole Digger (2026): 5 Picks for Fences and Planting
- Best Pressure Washer for Fences (2026): 5 Picks Compared
- Best Deer Fence (2026): 4 Netting Picks for Gardens
See the outdoor structures hub for more sheds, fences and storage.




