Best Jack Stands for Riding Mower Under $50 (2026)
Five 3-ton steel jack stand pairs for riding mower work, compared on height range, locking, base, coating and warranty from what each listing states.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallANTPOWER Double Lock9.7/10View on Amazon - 2
Best FoldableUSYATO Foldable 3-Ton9.6/10View on Amazon - 3
Best StabilityDonext Steel 3-Ton9.5/10View on Amazon - 4
Best Pin LockHENBOW Lock Pin 3-Ton9.5/10View on Amazon - 5
Best Tall RangeTONDA Extra Tall 3-Ton9.4/10View on Amazon - 6
Jack Stands 3 TonView on Amazon - 7
Amazon Basics Steel Jack Auto StandsView on Amazon - 8
Jack Boss Jack Stands Low Profile 2 TonView on Amazon - 9
YELLOW JACKET Car Jack Stands 3 Ton with Double Locking andView on Amazon
When a riding mower needs its blades changed or its deck cleared, the best jack stands for riding mower under 50 are what hold it steady while the work gets done. The pairs below are steel stands rated at 3 tons, compared on height range, locking, base and warranty.
AcreMowerLab earns a commission when you shop through links here. It never changes your price. Affiliate disclosure.
Quick picks
- Best Overall ANTPOWER Double Lock: ASME saddle, double lock and a 2-year warranty Check price on Amazon
- Best Foldable USYATO Foldable 3-Ton: Folds flat for storage, 4 height positions, safety pin Check price on Amazon
- Best Stability Donext Steel 3-Ton: ANSI/PALD standard and a wide pyramid foot base Check price on Amazon
- Best Pin Lock HENBOW Lock Pin 3-Ton: Double pin locking on a welded carbon steel frame Check price on Amazon
- Best Tall Range TONDA Extra Tall 3-Ton: Extra tall range to 21.06 inches for higher lifts Check price on Amazon
Our acreage picks
ANTPOWER 3 Ton Double Locking Jack Stands, 11.22 to 16.77 Inches, ASME Saddle
A 3-ton double locking jack stand pair with an ASME certified safety saddle, an 11.22 to 16.77 inch range and a 2-year manufacturer warranty.
Who it's for: a keeper who wants double locking, an ASME certified saddle and a stated 2-year warranty.
Who should skip it: a keeper lifting a chassis over 16 inches.
Read the full review
The ANTPOWER listing describes a 3-ton double locking pair, 11.22 to 16.77 inches, with an ASME certified saddle, a ductile iron ratchet and a fully welded mild steel frame. The title states 6000 lbs in one place and 6,600 lb per stand in another, and the spec table says alloy steel while the bullets say mild steel; the bullets win.
Pros
- ASME certified safety saddle, large concave shape that fits the chassis
- Double locking: self-locking ratchet plus a side pin lock
- Fully welded mild steel frame with anti-rust powder coating
- 2-year manufacturer warranty stated
Cons
- Title states 6000 lbs in one place and 6,600 lb per stand in another
- Spec table says alloy steel while the bullets say mild steel
- Not for chassis heights over 16 inches, per the listing
- Base dimensions are not stated, only a wide pyramid base
USYATO 3 Ton Foldable Jack Stands, 11.42 to 16.06 Inches, Safety Pin
A foldable 3-ton jack stand pair with 4 height positions from 11.42 to 16.06 inches, a safety pin and a 2-year warranty.
Who it's for: a keeper short on storage space who wants a folding pair with a stated warranty.
Who should skip it: a keeper who wants the tallest lift here.
Read the full review
The USYATO listing describes a foldable 3-ton pair with 4 height positions from 11.42 to 16.06 inches, a ratchet bar and safety pin, a wide triangular base and stamped steel construction, with a 2-year warranty in the spec table. The listing warns the foldable stand may appear loose until a load is placed on it.
Pros
- Folds flat for compact storage in a toolbox or cabinet
- 4 height positions from 11.42 to 16.06 inches with a ratchet bar and safety pin
- Wide triangular base for stability
- 2-year warranty stated in the spec table
Cons
- Listing warns the foldable stand may appear loose until a load is placed on it
- No rust-resistant coating is stated
- Weight stated as 3.5 kg, with no pound figure
- Height range tops out at 16.06 inches, below the tallest pair
Donext 3 Ton Steel Jack Stands, 11-2/5 to 16-3/4 Inches, ANSI/PALD
A 3-ton steel jack stand pair with a sawtooth ratchet bar, double lock protection and a wide pyramid foot base.
Who it's for: a keeper who wants a stated ANSI/PALD standard and a wide pyramid base.
Who should skip it: a keeper who wants a stated warranty term.
Read the full review
The Donext listing describes a 3-ton pair, 11-2/5 to 16-3/4 inches, in high carbon stamped steel, with a sawtooth ratchet bar, double lock protection and a wide pyramid foot base. The spec table lists truck as the compatible type while the bullets name home, auto, truck service, farm and shop use; the bullets win on uses here.
Pros
- Meets or exceeds ANSI/PALD standards as stated
- Sawtooth ratchet bar with double lock protection
- Wide pyramid foot base for stable support
- Large contact surface saddles
Cons
- No warranty term is stated
- Spec table lists truck only, while bullets name home, auto, farm and shop use
- Maximum height appears only in the bullets, not the spec table
- Stamped steel construction, not a fully welded frame
HENBOW 3 Ton Lock Pin Jack Stands, 11.02 to 16.14 Inches, Red
A red 3-ton jack stand pair with double pin locking, a serrated ratchet bar and a carbon steel welded frame.
Who it's for: a keeper who wants double pin locking and a welded carbon steel frame.
Who should skip it: a keeper who wants a stated warranty term.
Read the full review
The HENBOW listing describes a red 3-ton pair with double pin locking, a serrated ratchet bar with automatic locking and a carbon steel welded frame. The height range is stated three ways: the title says 11.02 to 16.14 inches, the bullets say 11 to 16.33 inches and the spec table gives a maximum of 16.33 inches. The bullets describe a black coating while the listing color is red.
Pros
- Double pin locking: locking ratchet bar plus safety pin
- Carbon steel frame with an industrially welded frame
- Serrated ratchet bar, multi-position adjustment with automatic locking
- Red pair, 2 jack stands included
Cons
- No warranty term stated; the spec table states No for warranty
- Height range stated three ways: title, bullets and spec table differ
- Bullets describe a black coating while the listing color is red
- Spec table lists 1 item against a 2 Count unit count
TONDA 3 Ton Extra Tall Jack Stands, 13.39 to 21.06 Inches, Self-Locking
An extra tall 3-ton jack stand pair with a 13.39 to 21.06 inch range, a self-locking ratchet and a wide pyramid base.
Who it's for: a keeper who needs the tallest lift here and a stated base size.
Who should skip it: a keeper who needs a low minimum height.
Read the full review
The TONDA listing describes an extra tall 3-ton pair, 13.39 to 21.06 inches, with a self-locking ratchet bar, a welded carbon steel frame, a cast-iron ratchet bar with a protective coating and a 7.2 x 8.86 inch pyramid base. The capacity line states 6,000 lb per pair, unlike the others, which tie their pound figures to each stand.
Pros
- Tallest height range here, 13.39 to 21.06 inches
- Wide pyramid base stated as 7.2 x 8.86 inches
- Welded carbon steel frame with a cast-iron ratchet bar
- Large saddle helps maintain contact with the supported vehicle
Cons
- Capacity stated as 6,000 lb per pair, not per stand
- No warranty term is stated
- Weight stated as 7.73 kg, with no pound figure
- Highest minimum height here at 13.39 inches
Other machines to compare
Jack Stands 3 TonCheck price on Amazon
Amazon Basics Steel Jack Auto StandsCheck price on Amazon
Jack Boss Jack Stands Low Profile 2 TonCheck price on Amazon
YELLOW JACKET Car Jack Stands 3 Ton with Double Locking andCheck price on Amazon
Side-by-side specs
| Model | Acre Score | Capacity | Height range | Locking | Warranty |
|---|---|---|---|---|---|
| ANTPOWER Double Lock | 9.7/10 | 3 ton (6,600 lb) per stand | 11.22 to 16.77 inches | Double lock, self-locking and side pin | 2-year manufacturer warranty |
| USYATO Foldable 3-Ton | 9.6/10 | 3 ton (6,600 lbs) | 11.42 to 16.06 inches | Ratchet bar and safety pin | 2-year warranty |
| Donext Steel 3-Ton | 9.5/10 | 3 ton (6,500 lb) each | 11-2/5 to 16-3/4 inches | Sawtooth ratchet, double lock protection | Not stated |
| HENBOW Lock Pin 3-Ton | 9.5/10 | 3 ton (6,600 lbs) | 11.02 to 16.14 inches (title) | Double pin locking | Not stated |
| TONDA Extra Tall 3-Ton | 9.4/10 | 3 ton, 6,000 lb per pair | 13.39 to 21.06 inches | Self-locking ratchet | Not stated |
Specifications are manufacturer rated as listed, collected 24 October 2026.
Acreage and terrain fit
ANTPOWER Double Lock
USYATO Foldable 3-Ton
Donext Steel 3-Ton
HENBOW Lock Pin 3-Ton
TONDA Extra Tall 3-Ton
Buying guide: choosing the best jack stands for riding mower under 50
Capacity: per stand or per pair
Every listing here is rated at 3 tons, but not stated the same way. The ANTPOWER, USYATO, Donext and HENBOW listings state 6,600 lb or 6,500 lb figures tied to each stand, while the TONDA listing states 6,000 lb per pair.
Height range
Height range decides how high the mower can sit during work. The TONDA pair is the tallest here, 13.39 to 21.06 inches, while the other four top out between 16.06 and 16.77 inches. The TONDA pair also has the highest minimum at 13.39 inches. The ANTPOWER listing excludes chassis heights over 16 inches, even though its own maximum is 16.77 inches.
Locking mechanisms
Locking is where these stands differ most. The ANTPOWER pair uses a double lock, a self-locking ratchet plus a side pin lock, and the HENBOW pair uses double pin locking, a ratchet bar plus a safety pin. The USYATO pair uses a ratchet bar and a safety pin, the Donext pair a sawtooth ratchet bar with double lock protection, and the TONDA pair a self-locking ratchet mechanism.
Base, frame and coating
All five pairs use steel frames, but the build details differ. The ANTPOWER frame is fully welded mild steel with an anti-rust powder coating, the HENBOW frame is welded carbon steel with a rust-resistant coating, and the TONDA frame is welded carbon steel with a cast-iron ratchet bar that carries a protective coating. The Donext and USYATO frames are stamped steel.
Warranty and storage
The ANTPOWER listing states a 2-year manufacturer warranty, and the USYATO listing states a 2-year warranty in its spec table. The Donext, HENBOW and TONDA listings state no warranty term. For storage, only the USYATO pair folds flat.
Matching It to Your Property
- Flat ground work: set the stands on level ground.
- Tight storage: the USYATO pair folds flat for a toolbox or cabinet.
- Tall lifts: the TONDA pair reaches 21.06 inches.
- Shop and farm use: the Donext listing names home, auto, farm and shop use.
Read the manual, keep children and pets out of the yard while you work, wear eye and hearing protection and sturdy footwear, and never exceed the slope rating of your machine. Refuel only with the engine off and cool. See CPSC lawn mower safety. Read our Safety Disclaimer.
The Acre Score explained
The Acre Score weighs performance, build quality, value, safety and warranty. A factor the listing does not state scores zero. Two listings state a 2-year warranty.
| Product | Acre Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ANTPOWER Double Lock | 9.7 | 30 | 21 | 21 | 6 | 3 |
| USYATO Foldable 3-Ton | 9.6 | 29 | 20 | 20 | 4 | 3 |
| Donext Steel 3-Ton | 9.5 | 28 | 20 | 20 | 6 | 0 |
| HENBOW Lock Pin 3-Ton | 9.5 | 28 | 20 | 20 | 5 | 0 |
| TONDA Extra Tall 3-Ton | 9.4 | 27 | 19 | 19 | 3 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
FAQ: mowing large lots
What height jack stand fits a riding mower?
Match the stand range to how high the mower needs to sit. The pairs here range from 11 inches to 21.06 inches, with the TONDA pair the tallest. The ANTPOWER listing excludes chassis heights over 16 inches.
Are 3-ton jack stands enough for a riding mower?
Every listing here is rated at 3 tons, but the capacity basis differs: the TONDA listing states 6,000 lb per pair, while the others state 6,500 lb or 6,600 lb figures per stand.
Do jack stands need a safety pin?
Locking designs differ across these listings. The ANTPOWER, HENBOW and USYATO pairs all add a pin to the ratchet lock, while the Donext pair uses double lock protection and the TONDA pair uses a self-locking ratchet mechanism.
Do any of these stands fold for storage?
Only the USYATO pair is described as foldable, collapsing flat for a toolbox or cabinet.
More mowing guides
- Riding Mower Maintenance: Step-by-Step Care Guide
- Best Deck Belt for Riding Mower (2026): 5 Compared
- Best Riding Mower for Hills: 4 Picks and How to Read Slope Ratings
- Flail Mower Maintenance: Step-by-Step Care Guide
See every mower maintenance guide and our best jack stands for riding mower picks.
